Motion Control Web

Motion Control – Ball Screw Tutorial

Tutorial presented by Steinmeyer – Many engineers are confused about this topic, especially if they don’t work frequently with ball screws. So let’s take a moment to explain the terminology.

BURLINGTON, MA — There are generally two load capacities given for a particular ball screw: Dynamic and Static.

Dynamic Load Capacity

The dynamic load capacity (DLC) is simply a load rating. It’s the load for a (theoretical) life of 1 million revolutions (ISO/JIS standard) or for 1 million inches of travel (ANSI standard). The DLC is critical for making lifetime calculations, since the expected life goes as the cube of the ratio of DLC to actual load. So, if the load is only 10% of DLC, then the expected life is 1 billion revolutions.

But that still doesn’t mean you could run the screw with this kind of load and expect a to achieve that life! Why? The normal maximum operating load of a general use ball screw is about 30% of the DLC. (Above that, the elastic deformation of the balls and races is too large, which may cause excessive wear.) So, if you run a ball screw with a load equal to its DLC, you may not get as much life as you expect.

Static Load Capacity

The static load capacity (SLC) indicates the load above which the screw may be damaged. Staying below SLC ensures that balls and races don’t suffer brinelling (or plastic deformation). This is critical! But bear in mind that a ball screw may be damaged in other ways with loading below the SLC: you could easily tear off the flange of the nut, snap the bearing or drive journal of the screw, or even collapse it from exceeding the buckling load.

About Steinmeyer

Steinmeyer is the world’s longest continuously-operating manufacturer of commercial ball screws. In the realm of linear motion control, our company has become synonymous with precision, innovation, and exacting standards of quality.

Steinmeyer’s extensive product line is used widely in drive systems for industrial machines as well as precision positioning in optical instruments, medical devices, and mechatronic applications.

Contact Steinmeyer for further information on their extensive product portfolio:

781-273-6220

infoUSA@steinmeyer.com

Visit Steinmeyer.com

Steinmeyer Ball Screw Resource Center

See this and other Motion Control Ball Screws, Stages, Technology Notes, Custom Components from Steinmeyer featured on:

http://MotionShop.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

Motion Control – Application

While robotic assistance systems are available for most types of surgery today, eye surgery used to be an exception. A Dutch company has changed that. A world first in eye surgery.

© 2016 Preceyes

Fall River, MA — Motion Control Components Application – Worldwide, about 50 to 70 million people are suffering from visual impairment due to disorders of the retina. Adequate treatment is still impossible in many cases. Eye operations are always a big challenge for a surgeon, and steady hands are a key requirement. Surgeries like those for treating a detached retina require extreme precision. And when it comes to precision, human hands can’t hold a candle to robotic systems.

Ten to twenty times better precision

This is why the company Preceyes, which originated as a spin-out from the University of Eindhoven (Netherlands), has developed a completely new robotic system for eye surgery.

Motion Control Integrated Step Motors

Vaughan, Ontario, Canada — Motion Control Components — JVL Industri Elektronik A/S, one of the world leaders in the field of integrated servo – and stepper motors introduces a new compact and slim stepper motor. The new ServoStep integrated stepper motor series MIS171 to MIS176 have a NEMA 17 42×42 mm flange and include controller with 6 different industrial Ethernet protocols, absolute multiturn encoder, closed loop and M12 connectors. This new motor family is based on the latest microprocessor and cooling technology and an advancement compared to previous designs.

All the necessary electronics in a stepper system are integrated in the motor itself and are similar to the concept used by other JVL motors, making it very easy to use in all kind of motion control stepper or servomotor applications. The motor contains everything needed to solve a modern control task, either as a stand-alone with own easy programmable motion controller or controlled from an external PLC or PC. 8 I/O points can be individually configured as digital input, digital output or analogue input. Modbus RTU or CANopen provide easy connections to a PLC or HMI. An ActiveX/OCX driver is available to make simple interface to LabView, Excel, VB or other Windows-programs. Up to 254 axis can be connected on the same RS485 bus.

Key features:

• Industrial Ethernet. 6 Protocols 
• Very high motor power and torque
• Closed-loop operation with current control 
• Absolute multiturn encoder
• Safe Torque Off (STO) input
• High resolution 409600 cnt/rev.
• Speed 0-3000 in 0.01RPM steps
• Wide supply range 7-72 VDC
• Protection class up to IP67
• M12 or M23 connectors

Motion Control Industrial Ethernet: 

Profinet, EtherCAT, Powerlink, EtherNet/IP, Modbus TCP or SERCOS III are available and for EtherCAT and SERCOS III synchronization and drive profiles are available. MACtalk can use Ethernet for commissioning the motor so no need for RS232/RS485 converter or additional cables. The motor has the ability to be upgraded with other protocols or newer versions of the same protocol at any time Because of the upgradeability, the JVL Industrial Ethernet module is also ‘future proof' as newer versions of the protocols will always fit into the design. The motor is equipped with two Ethernet connectors and a built-in switch, enabling line topology without any extra expensive hardware. Several LEDs, enabling technicians and operators to get a quick status overview.

Motion Control Motor range:

• MIS171 with 0,15 Nm, length 70,5 mm. 5mm shaft 
• MIS173 with 0,26 Nm, length 83,5 mm. 5 or 6,35mm shaft
• MIS176 with 0,80 Nm, length 104,3 mm. 8 mm shaft

The motors can be operated as stand-alone units or controlled from a PLC or PC. The 8 I/Os can be individually configured as digital input, digital output or analog input. As standard, it is possible to communicate with holistic systems via for example Modbus RTU or CANopen. The MAC motor standard protocol that is also supported makes it possible to connect up to 254 other JVL integrated motors. The MIS17 series allows connectivity to all industrial Ethernet interfaces such as Profinet, EtherCAT, Powerlink, EtherNet/IP, Modbus TCP and SERCOS III.

Motion Control Interface: 

• Industrial Ethernets Profinet, EtherCAT, Powerlink, EtherNet/IP, Modbus TCP and SERCOS III
• CANopen DSP402 and DS301
• Pulse/Direction mode for electronic gear
• High speed position capture
• ActiveX/OCX driver as well as JVL MacTalk Protocol
• Strong graphic programming with + – * / calculations and advanced features
• SSI interface for external linear or rotary absolute encoders
• External encoder for dual closed-loop. 
• RS485 up to 921 kbit and Modbus RTU
• RS422 and RS485 for encoder I/O and connection to external HMI, PLC or encoder
• Point-to-point or multi-axis operation with up to 254 JVL motors on the same RS485 bus
• Wireless Industrial Ethernet through Bluetooth or WLAN

Motion Control Motor specification: 

• Built-in PLC with 8 DIO, 24V or 0-5V (12bit) analog input with advanced filtering
• Speed-precision 0.01 RPM. Acceleration-precision 1 RPM / sec.
• Absolute multi-turn encoder
• Built-in encoder for closed loop and stall detection and control 
• Wide supply range of 7-72 VDC provides high torque at high speeds
• Dual supply maintain position values etc. in emergency situations
• Motor current 0-4 Amp RMS and 5,6 Amp peak
• Closed-Loop operation
• Double shaft and brake option
• All connections with M12 connectors in IP67
• Top or rear-end mounted M12 or M23 hybrid connector

For further information on the JVL ServoStep Series Motors, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

About Electromate:

Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

More on Electromate can be found at

Website: http://www.electromate.com

LinkedIn: https://www.linkedin.com/company-beta/209277/

Twitter: https://twitter.com/Electromate

Facebook: https://www.facebook.com/electromateindustrial/

Google+: https://plus.google.com/104057418684128701566

Blog: https://electromate.wordpress.com/

For more information on the “Best Place to Work”CLICK HERE!

To view Electromate’s new corporate video CLICK HERE

To see all of Electromate’s Products and Application Stories featured on MotionShop.com, enter electromate in the Google custom search box (upper left, above)

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

Motion Control – Digital Servo Amplifiers

Motion Control Components – Servo2Go.com announces the release of the DZRALTE Series of High Performance Digital Servo Drives from Advanced Motion Controls of Camarillo, CA, which are engineered to conquer the most demanding industrial applications!

The DZRALTE Series are motion control digital servo drives that control brushed & brushless servomotors in a compact form factor which make them ideal for embedded applications. These fully digital drives operate in torque, velocity, or position mode and employ Space Vector Modulation (SVM) which results in higher bus voltage utilization and reduced heat dissipation compared to traditional PWM drives. The command source can be generated internally or can be supplied externally. In addition to motor control, these drives feature dedicated and programmable digital and analog inputs and outputs to enhance interfacing with external controllers and devices.

The DZRALTE Series feature a RS-232 interface for drive configuration and setup as well as a RS-485 interface for drive networking. All drive and motor parameters are stored in non-volatile memory. Drive commissioning is accomplished using AMC’s powerful & user friendly free DriveWare software.

The combination of a DigiFlex® Performance™ DZRALTE servo drive with its DriveWare software establishes a new benchmark in versatility!

Motion Control Capabilities built into the DZRALTE servo drives include:

• Size Ranges: 10-175 VDC @ 6A to 30A continuous (60A peak) Output
• Full tuning control of all three servo loops: Position, Velocity and Torque!
• Real-time oscilloscope with up to 8 channels to ensure that tuning achieves the highest performance
• Status window with over 50 simultaneous channels for drive and system diagnostics
• I/O configuration configurable to latch/non-latch as well as active-high & active-low
• Universal servo motor compatibility by means of automatic commutation adjustment
• Dual Loop Feedback – Increases both stability and accuracy

Additional information on the DZRALTE Series Servo Amplifiers can be found at: https://www.servo2go.com/catalogsearch/result/?q=DZRALTE

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak atwarren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

See this and other Motion Control Components from Servo2Go featured on:
http://MotionShop.com
http://AllMotionBlogger.com
http://Automation-Blogger.com
http://MotionControlBlogger.com
http://motioncontrolBuyersGuide.com
http://MotionControlWeb.com
http://MotionShop.net

Motion Control – Power On Clutches

Vaughan, Ontario, Canada — Motion Control Components — Power-on Clutches are used to couple two parallel shafts. The armature hub assembly is mounted to the same shaft as the rotor assembly. The armature hub accommodates a pulley, gear, sprocket, etc., to transmit torque to the second shaft. The field assembly is mounted on the shaft and retained by a loose-fitting pin or bracket through the anti-rotation tab.

Typical Applications of Clutches include:

• Packaging Machinery
• Medical Equipment
• Conveyors
• Postal Sorters/Readers
• Document Feeders
• Textile Equipment
• Mobile Power Equipment
• Copiers/Printers

Electromate offers a full family of Power-On Clutches, from Inertia Dynamics, for most applications. All Inertia Dynamics clutches are recognized by Underwriters Laboratories to both U.S. and Canadian safety requirements.

Information on the Power-On Clutches from Inertia Dynamics can be viewed at:https://www.electromate.com/products/power-transmission-mechanical-products/clutches/.

About Electromate:

Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

More on Electromate can be found at

Website: http://www.electromate.com

LinkedIn: https://www.linkedin.com/company-beta/209277/

Twitter: https://twitter.com/Electromate

Facebook: https://www.facebook.com/electromateindustrial/

Blog: https://electromate.wordpress.com/

For more information on the “Best Place to Work”CLICK HERE!

To view Electromate’s new corporate video CLICK HERE

To see all of Electromate’s Products and Application Stories featured on MotionShop.com, enter electromate in the Google custom search box (upper left, above)

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

See this and other Motion Control Components from Electromate featured on:

http://MotionShop.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

Motion Control – John Uzzolino joins Maxon Group 

John Uzzolino comes to maxon Group with 20 years’ of experience in industrial motion control and mechatronics applications. John started his career as a Sales Engineer working with a high tech distribution company, focusing on solving motion control and mechatronic applications for machine builders in the Northeast U.S. John then went to work for a local machine builder, helping them bring their automated test and measurement products to the North American market. Most recently, John worked for two European control manufacturers, helping them develop customers in the U.S. market.Taunton, MA — Maxon Group of Taunton, MA has hired John Uzzolino to head up the business development activities for the Parvalux product line in the United States. In December, Maxon Group acquired the British geared motor manufacturer Parvalux Electric Motor, Ltd. (For additional information Click Here)The acquisition expands the maxon portfolio with DC drives in the power range of up to 1.5 kW, as well as an attractive expansion of maxon group’s already broad motor and motion control portfolio including AC Motors and Worm gearboxes. The acquisition and the addition of Mr. Uzzolino to the team demonstrates maxon group’s continuing commitment to becoming a provider of complete systems. Ultimately, the acquisition opens interesting new markets requiring larger drives and motion systems such as patient handling within the medical technology sector (stair lifts, electric wheelchairs, etc.) and industrial applications (robotics and transport systems, conveyors).

As the Business Development Manager for Parvalux, John will be responsible for managing and promoting the Parvalux products in the United States, initially focusing on the industrial and e-mobility markets. “I’m excited to be on board and help bring a strong European brand to the U.S. market,” says John Uzzolino. “Parvalux has positioned themselves well to be a high-quality product at a competitive price, while offering both standard and highly customized solutions globally. Combining this with the ability to now manufacture locally in Massachusetts, positions Parvalux well to build a strong brand here in the U.S.”

About Parvalux

Parvalux is a leading global manufacturer of geared motor solutions with over 70 years’ experience in creating the perfect combination of motor and gearbox to match the customer’s application. Parvalux offer thousands of standard options as well as customization of any motor or gearbox to meet customer requirements. Parvalux products are found in hundreds of applications in healthcare, leisure, mobility, transport, and a diverse range of industrial applications. For more visit www.parvalux.com

About Maxon

maxon is a developer and manufacturer of brushed and brushless DC motors, as well as gearheads, encoders, controllers, and entire mechatronic systems. With over 50 years of experience in drive technology, maxon works closely with engineers designing high-tech innovations. maxon drives are used wherever the requirements are particularly high: in NASA’s Mars rovers, in surgical power tools, in humanoid robots, and in precision industrial applications. Worldwide, maxon has more than 2800 employees at nine production sites and is represented by sales companies in more than 30 countries. www.maxongroup.com

Contact maxon for more details https://support.maxongroup.com/hc/en-us/requests/new

Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.maxonmotor.com.

See this and other Motion Control Components from Maxon featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

Request 2020/2021 Maxon Catalog

Motion Control – Vacuum Compatible Voice Coil Motor

Van Nuys, CA – Motion Control Components – Moticont has added a vacuum compatible voice coil motor to its line of linear DC motors. This vacuum compatible, clean, brushless, quiet, efficient, low inertia, high acceleration, high speed linear DC voice coil motor has zero cogging and features high accuracy, and high repeatability when operated in a closed loop as a DC servo motor. The new LVCM-038-038-01-VAC Vacuum Compatible Linear Voice Coil Motor has a stroke length of 0.75 in. (19.1 mm) with a high force-to-size ratio of 3.0 lb (13.4 N) and a peak force of 9.5 lbs. (42.5 N) at a 10% duty cycle.

The motor features two 8-32 UNC-2B threaded mounting holes in the housing and two 8-32-UNC-2B threaded mounting holes on the coil end for easy integration into new and existing applications. Also called a moving coil motor, the compact 1.50 in. (31.8 mm) diameter LVCM-038-038-01-VAC Vacuum Compatible Linear Voice Coil Motor is ideal for: Medical devices, scanners and laser beam steering and filtering, work holding and clamping, testing, wafer handling, optical focusing, in vacuum applications.

Complete plug-and-play systems including an encoder and servo controller are available. Is there a need for a smaller or larger diameter motor, one with longer travel, or more force? There are more than 12 in the expanding series of Moticont’s LVCM linear motors based on diameter of the motor, and over 50 models based on length of stroke and/or force to select from. To find the right motor for your application go to http://moticont.com/voice-coil-motor.htm

About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding Our customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Our modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement our product design strengths. This enables us to supply our clients with specialized small orders to high volume just-in-time deliveries.

We offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Sales Team at Moticont, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-1804, Tel: +1 (818) 785-1800, moticont@moticont.comor visit the website at http://www.moticont.com

See this and other Motion Control Components from Moticont are also featured on:
http://MotionShop.com
http://AllMotionBlogger.com
http://Automation-Blogger.com
http://MotionControlBlogger.com
http://motioncontrolBuyersGuide.com
http://MotionControlWeb.com
http://MotionShop.net

Motion Control – Extension Rail Systems

E. Longmeadow, MA Motion — Control Components – Linear Motion – As the exclusive distributor of SAIBO Linear Motion Systems in the US, LM76 is offering the SAIBO TPE28 and TPE43 series of Partial Extension Rails. These compact, precision, smooth sliding rails are assembled with a zero clearance. The TPE28 and TPE43 Partial Extension Rail series are created using a “C” shaped external rail and an internal slider. Two rows of steel ball bearings (one on the top and bottom of the slider) travel in ball cages on hardened “V” shaped ways with four points of contact. These Partial Extension Rails are Ideally suited for applications requiring smooth motion such as: Material handling, rail systems in trains, aircraft, ships, trucks, and autonomous vehicles, wafer handling, delicate parts transfer, assembly, testing, laser machining and drilling.

The TPE28 series of Partial Extension Rails consists of 14 rails with stroke lengths from 72 mm (2.834 in) to 601 mm (23.661 in.) and supporting loads from 1224 N (275 lbs) to 15,166 N (3409 lbs) when two rails are mounted in parallel and the load is uniformly distributed between the rails. The TPE43 series of Partial Extension Rails consists of 23 rails with stroke lengths from 123 mm (4.842 in) to 1013 mm (39.881 in.) and supporting loads from 3192 N (717 lbs) to 48460 N (10,894 lbs) when two rails are mounted in parallel and the load is uniformly distributed between the rails. Stroke lengths (extension) are typically 51% of the length of the assembly.

These industry standard Partial Extension Rails are ideal for use in new and existing applications. Both the TPE28 and TPE43 Partial Extension Rails have a maximum working speed of 0.8 m/sec. (xxx in/sec )and have an operating temperature range of -20OC (-20OF) to 120OC (-20OF). For complete information on the assembly, loads, and stroke lengths for each series and additional details consult the factory.

LM76 also manufacturers a broad variety of FDA & USDA compliant bearings and shafting, in inch sizes of .25 inches to 1.5 inches, and a FDA & USDA compliant profile rail and slide system that can easily be integrated into new and existing applications. The bearing options include: Self-lubricating FDA & USDA compliant Teflon® composite bearings in a 304 stainless steel shell, and lower cost bearings with a ceramic coated shell and FDA & USDA compliant liner. Bearings are available in closed and open configurations, and are drop-in replacements for all inch sized linear ball bearings.

To follow the NEW Series from LM76, THE ENGINEERING EDGE! and learn about interesting Outside-of-the-Box solutions developed by LM76 to solve some interesting linear motion problems! CLICK HERE

About LM76

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com

And say, “I saw it on MotionShop.com, “The Motion Control Home Page.”

See this and other Motion Control Components from LM76 are also featured on:
http://MotionShop.com
http://AllMotionBlogger.com
http://Automation-Blogger.com
http://MotionControlBlogger.com
http://motioncontrolBuyersGuide.com
http://MotionControlWeb.com
http://MotionShop.net

Motion Control – Three Axis Gimbal Mount

Van Nuys, CA – — The New AU300-AER three-axis Gimbal Mount from OES (Optimal Engineering Systems, Inc.) features full 360O rotation of each axis. This three-axis gimbal mount handles loads to 10kg (22.5 lbs) and has a clearance of 300 mm x 300 mm, (11.8 in. x 11.8 in.) around the roll axis stage. The Azimuth stage rotary table is mounted on a large 360 mm (14.173 in.) x 360 mm (14.173 in.) x 13 mm (0.512 in.) plate with handles and has predrilled accessible mounting holes for easy integration into new or existing applications, and for increased stability. The AU300-AER three-axis Gimbal Mount is ideal for mounting: cameras, optics, lasers and instrumentation for scanning, tracking, positioning, pointing, and other applications.

The 3 axes: azimuth, elevation, and roll axes are drived by bi-directional stepper motors capable of microstepping, and has knobs for manual adjustments. The roll axis table measures 100 mm (3.937 in.) in diameter. The knobs may be replaced with optical encoders for position verification and closed loop positioning. Each axis features: low backlash worm gear drives and precision “V” groove and cross roller bearings for very high resolution of 3.6 arc seconds, and repeatability and positional accuracy to 36 arc seconds. Travel speed of each axis is 8 O per second. Electrical connections are made using three 9 pin DB-9 connectors.

The AU300-AER Motorized Three-axis Gimbal Mount can be ordered as a complete plug-and-play system with a multi-axis controller, joy stick, track ball, or keypad, and with a 30 mm thru hole in the roll stage.

About OES – Optimal Engineering Systems, Inc. (OES) is a manufacturer of motion control products including: Stepper motor controllers and drivers, solenoid electronics, and positioning stages and slides. Applications include: Animation, automated assembly systems, automation, CNC machines, flight simulation, inspection systems, linear and rotary stages, machine tools, medical devices, motion control camera boom systems, optical comparators, CMMs, pan-tilt gimbals, PCB assembly & inspection, pick-and-place, positioning stages, robotics, scanners, security cameras, telescope drive mechanisms, time-lapse photography and winders.

Some of the industries OES serves are: Aerospace, Astronomy, Chemical, Communications, Educational Institutes, University, Colleges, Government Agencies, National Labs, Manufacturing, Medical, Metrology, Military, Motion Control, Museum, News Agencies, Semiconductor and Test Equipment. Optimal Engineering Systems, Inc’s. competitive advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.

For additional information, contact sales team at: OES, 6901 Woodley Ave.; Van Nuys, CA 91406; Telephone: 888-777-1826 or +1 818-222-9200, FAX +1 818-436-0446 or E-Mail: sales@oesincorp.com or visit the website at http://www.oesincorp.com

See this and other Motion Control Components from OES (Optimal Engineering Solutions) are also featured on:
http://MotionShop.com
http://AllMotionBlogger.com
http://Automation-Blogger.com
http://MotionControlBlogger.com
http://motioncontrolBuyersGuide.com
http://MotionControlWeb.com
http://MotionShop.net

Motion Control – Miniature Sub-micron Voice Coil Stage

Forestville, CA, — — High speed, high force, sub-micron, >300 nanometer (1.1811 10-6 in.) positioning resolution, cross roller voice coil stages are self contained, compact, and can be mounted in a horizontal or vertical axis. The high speed, 20 mm (0.7874 in.) travel, Equipment Solutions’ Motion Control VCS-2020 Voice Coil Stage features a 20 mm dia. aperture. An integrated Analog position feedback sensor assures 100 nanometer (3.937 10-6 in.) repeatability. This compact voice coil stage is ideal for such micro-positioning applications as: Scanning interferometry, disk drive testing, auto focus systems, surface structure analysis, confocal microscopy, biotechnology, and semiconductor test equipment.

The compact 117 mm 75 mm 81 mm (4.60 in. 2.96 in. 3.18 in.), low mass, voice coil stage is a fully self-contained system including a high precision cross roller stage, voice coil actuator, analog position sensor, servo amplifier and servo controller. The low inertia cross roller stage is integral to the standard threaded “C” lens mount and motor coil for tip/tilt free motion. Custom lens mounts are available. The voice coil motor is rated at 17.8 N (4 lbs.) continuous force and 71.8 N (16 lbs.) peak for 10 seconds and is clean room compatible. For easy integration into a new or existing application the VCS-10H Voice Coil Stage has multiple sets of mounting holes on several surfaces.

Equipment Solutions, Inc. (ESI) is a provider of engineering and manufacturing services. ESI specializes in the design and production of automation and instrumentation products including motion control components and sub systems. ESI’s products range from galvanometer amplifiers with an integrated arbitrary waveform generator, to high-resolution displacement sensors, voice coil and stepper motor stages, amplifiers and controllers.

For additional information contact Jeff Knirck at Equipment Solutions,Inc. Mailing Address – PO Box 159, Forestville, CA 95436; Shipping Address 6490 Front Street, Forestville, CA 95436; Tel: 408-245-7162, Fax: 408-245-7160, E-Mail: info@equipsolutions.com or visit the Website at http://www.equipsolutions.com

See this and other Motion Control Components from Equipment Solutions are also featured on:
http://MotionShop.com
http://AllMotionBlogger.com
http://Automation-Blogger.com
http://MotionControlBlogger.com
http://motioncontrolBuyersGuide.com
http://MotionControlWeb.com
http://MotionShop.net

Motion Control – Automation Fair

We are excited to invite you to the Electromate Automation Fair on November 6, 2019. The event will take place at the Delta Hotels Burnaby Conference Centre in Burnaby, British Columbia. The Automation Fair is a great opportunity to explore new technologies and see what’s changing in the world of Automation and Motion Control. Don’t miss this opportunity to meet some of leading manufacturers in the Automation Industry, as well as like-minded industry professionals.

Motion Control Manufacturers in Attendance Include:

Advanced Motion Controls

Applied Motion Products

Exor Electronic

Galil Motion Control

Gam Gear

Kollmorgen

Macron Dynamics

Maxon Motor

Posital Fraba

Harmonic Drive

Tolomatic

Who would benefit from this Motion Control Seminar:

OEM’s, Custom Machine Builders and End Users in the following industries: Medical, Pharmaceutical, Life Science, Subsea, Robotics, Industrial Automation, Food & Beverage, Forestry, Packaging, Film & Entertainment, Scientific, and Communication Industries.

Topics Covered Include:

Industrial Automation

Motion Control

Robotics

Machine Control

Motor Control

The Agenda Includes:

Lunch will be served as well as snacks/drinks throughout the day. A host bar (beer & wine only) will be open from 1:00pm to 7:00pm.

Cost to attend the Automation Fair is FREE, however preregistration is required. Click HERE to register.

About Electromate:

Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

More on Electromate can be found at

Website: http://www.electromate.com

LinkedIn: https://www.linkedin.com/company-beta/209277/

Twitter: https://twitter.com/Electromate

Facebook: https://www.facebook.com/electromateindustrial/

Blog: https://electromate.wordpress.com/

For more information on the “Best Place to Work”CLICK HERE!

To view Electromate’s new corporate video CLICK HERE

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

See this and other Motion Control Components from Electromate are also featured on:
http://MotionShop.com
http://AllMotionBlogger.com
http://Automation-Blogger.com
http://MotionControlBlogger.com
http://motioncontrolBuyersGuide.com
http://MotionControlWeb.com
http://MotionShop.net

Motion Control – Servo Drive

The AB25A100 PWM servo drive from Advanced Motion Controls is designed to drive brushless and brushed DC motors at a high switching frequency.

Greenville, DE —-Motion Control Components – The drive is fully protected against overvoltage, under-voltage, over-current, over-heating and short-circuits across motor, ground and power leads. Furthermore, the drive can interface with digital controllers or be used stand-alone, and requires only a single unregulated DC power supply. Loop gain, current limit, input gain and offset can be adjusted using 14-turn potentiometers. The offset adjusting potentiometer can also be used as an on-board input signal for testing purposes. This drive can use quadrature encoder inputs for velocity control.

Features include:

• 20-80 VDC Input, 15 A Cont. (25 Peak) Output
• Built-in hardware protection – Over Current, Over Voltage, Under Voltage, Over Temperature, Short Circuit
• DIP Switches and Potentiometers for loop tuning, current limit adjustments and drive configuration
• Standard models support both brushless and brushed motor types
• Velocity feedback via incremental encoder, Hall Sensors, or tachometer
• Optical isolation between high and low power signals standard on certain models
• Current, Velocity, and Fault Monitor analog output signals
• Status LEDs for power and drive status
• Four quadrant regenerative operation

CLICK HERE for more information on the AB25A100 Servo Drive from Advanced Motion Controls.

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak atwarren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

For other Motion Control Components, Applications, and Technology from Servo2Go go to: http://MotionControlBuyersGuide.com

See this and other Motion Control Components from Servo2Go are also featured on:
http://MotionShop.com
http://AllMotionBlogger.com
http://Automation-Blogger.com
http://MotionControlBlogger.com
http://motioncontrolBuyersGuide.com
http://MotionControlWeb.com
http://MotionShop.net

Motion Control – Elevator Stages

Van Nuys, CA – — Motion Control- Optimal Engineering Systems, Inc. (OES) has released two new high precision Z-Axis Elevator Stages. The AZV9010 and the AZV9020 Motorized Z-Axis Linear Positioning Stages have vertical travels of 10 mm and 20 mm respectively.

The vertical motion of each Z-Axis Stage is driven by an 8 mm diameter ball screw with a 1 mm lead, and guided by cross roller bearings. Very high resolutions of 0.1 micron or 0.05 microns with 10/20 micro-steps per step motor drive, and repeatability of +/- 0.5 microns makes these two Z-Axis Stages ideal for: Microscopy, inspection, metrology, positioning, photonics, sampling, and laser drilling and machining.

Each stage has a 90 x 90 mm (3.543 in. x 3.543 in.) table with threaded holes for fixtures or tooling. Additionally each stage features a dynamic straightness of 5 microns and dynamic parallelism of 30 microns. The maximum z-axis travel speed is 5 mm/sec (0.196 in/sec) and load capacity is 5 kg. (11.0 lbs)

The AZV9010 and AZV9020 Z-Axis Stages are constructed of black-anodized aluminum alloy and weighs just 1.85 kg (4.978 lbs), and 1.95 kg (4.299 lbs). Each stage has a knob for manual adjustment, and the stages can be supplied plug-and-play with a motion controller.

About OES – Optimal Engineering Systems, Inc. (OES) is a manufacturer of motion control products including: Stepper motor controllers and drivers, solenoid electronics, and positioning stages and slides. Applications include: Animation, automated assembly systems, automation, CNC machines, flight simulation, inspection systems, linear and rotary stages, machine tools, medical devices, motion control camera boom systems, optical comparators, CMMs, pan-tilt gimbals, PCB assembly & inspection, pick-and-place, positioning stages, robotics, scanners, security cameras, telescope drive mechanisms, time-lapse photography and winders.

Some of the industries OES serves are: Aerospace, Astronomy, Chemical, Communications, Educational Institutes, University, Colleges, Government Agencies, National Labs, Manufacturing, Medical, Metrology, Military, Motion Control, Museum, News Agencies, Semiconductor and Test Equipment. Optimal Engineering Systems, Inc’s. competitive advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.

For additional information, contact sales team at: OES, 6901 Woodley Ave.; Van Nuys, CA 91406; Telephone: 888-777-1826 or +1 818-222-9200, FAX +1 818-436-0446 or E-Mail: sales@oesincorp.com or visit the website at http://www.oesincorp.com

See this and other Motion Control Components from OES (Optimum Engineering Systems) are also featured on:
http://MotionShop.com
http://AllMotionBlogger.com
http://Automation-Blogger.com
http://MotionControlBlogger.com
http://motioncontrolBuyersGuide.com
http://MotionControlWeb.com
http://MotionShop.net

Forestville, CA, – — The motion control SMS12 Linear Stepper Motor stage is an ultra compact stage that provides up to 12 millimeters of linear motion. This stage offers near sub-micron resolution with the ability to accelerate a small load at 2G’s. A non-contact home sensor provides a reference position with repeatability of a couple microns. It was specifically developed for optical applications requiring both high precision and modest-speed positioning over a short to medium stroke. The SMS12 is well suited for optical focusing and other micropositioning applications such as scanning interferometry, surface structure analysis, disk drive testing, autofocus systems, confocal microscopy, bio-technology, semiconductor test equipment.

Specifications:

• Translation 43µm/step
• 0.67µm @ 64µstep/step
• Maximum Travel 12mm
• Maximum Acceleration 2G
• Maximum Velocity 250mm/sec
• Maximum Load Capacity 13kg
• Maximum Moment Load 1.8kg
• Positioning Accuracy ±2µm
• Bidirectional Repeatability ±1µm
• Homing Repeatability ±1µm
• Motor Amps/Phase 0.3
• Dimensions 39.1 x 39.1 x 31.75mm

The SMS12 can be ordered with an optional stepper motor controller that is nearly the same size a the SMS12 itself. Only raw power and a simple RS232/RS485 communications line is needed to completely control this high-resolution stage.

Equipment Solutions, Inc. (ESI) is a provider of engineering and manufacturing services. ESI specializes in the design and production of automation and instrumentation products including motion control components and sub systems. ESI’s products range from galvanometer amplifiers with an integrated arbitrary waveform generator, to high-resolution displacement sensors, voice coil and stepper motor stages, amplifiers and controllers.

To view and/or down load the Data Sheet CLICK HERE

For additional information contact Jeff Knirck at Equipment Solutions,Inc. Mailing Address – PO Box 159, Forestville, CA 95436; Shipping Address 6490 Front Street, Forestville, CA 95436; Tel: 408-245-7162, Fax: 408-245-7160, E-Mail: info@equipsolutions.com or visit the Website at http://www.equipsolutions.com

See this and other Motion Control Components from Equipment Solutions are also featured on:
http://MotionShop.com
http://AllMotionBlogger.com
http://Automation-Blogger.com
http://MotionControlBlogger.com
http://motioncontrolBuyersGuide.com
http://MotionControlWeb.com
http://MotionShop.net

Motion Control XY High Resolution Stage

Van Nuys, CA – — Motion Control – OES (Optimal-Engineering Systems, Inc.) has added a new, larger, high load, precision stage to it’s extensive line of precision XY stages. The AU200-170×170 stage is a low profile stage measuring just 108 mm (2.252 in) high with a compact footprint (including the motors) of 458.5 mm x 458.5 mm (18.032 in.) The linear travel of the X and Y axes is 170mm x 170mm (6.692 in.), and the resolution of each axis is 20 microns (non-micro-step) or 1 micron (20 micro-steps per step motor driver in use), repeatability is 2 microns, and the positional accuracy is 3 microns. The 4 mm per-turn lead screws have just 2 microns of backlash and the stages have preloaded V-groove and crossed roller bearings contributing to the high precision and stiffness of the AU200-170×170 Stage. Designed for applications such as: alignment, assembly, laser drilling, machining, medical, industrial, semiconductor handling, testing, scanning, and optical applications, this compact, low profile black anodized aluminum XY stage is easy to integrate into new or existing systems.

The XY stage’s table measures 300 mm x 300 mm (11.8 in x 11.8 in.) and features a precision pattern of drilled and threaded mounting holes to facilitate the addition of tooling or fixtures. Additionally a table with a large open aperture is also available.

The standard two-phase (1.8o) stepper motors have knobs for manual adjustments of each axis of the stage, however, the knobs can be replaced with incremental encoders for position verification or closed loop operation. As an option, servo motors and compatible motion controllers are also available from OES, or the AU200-170×170 Stage can be ordered as a complete plug-and-play motion control system.

About OES – Optimal Engineering Systems, Inc. (OES) is a manufacturer of motion control products including: Stepper motor controllers and drivers, solenoid electronics, and positioning stages and slides. Applications include: Animation, automated assembly systems, automation, CNC machines, flight simulation, inspection systems, linear and rotary stages, machine tools, medical devices, motion control camera boom systems, optical comparators, CMMs, pan-tilt gimbals, PCB assembly & inspection, pick-and-place, positioning stages, robotics, scanners, security cameras, telescope drive mechanisms, time-lapse photography and winders.

Some of the industries OES serves are: Aerospace, Astronomy, Chemical, Communications, Educational Institutes, University, Colleges, Government Agencies, National Labs, Manufacturing, Medical, Metrology, Military, Motion Control, Museum, News Agencies, Semiconductor and Test Equipment. Optimal Engineering Systems, Inc’s. competitive advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.

For additional information, contact sales team at: OES, 6901 Woodley Ave.; Van Nuys, CA 91406; Telephone: 888-777-1826 or +1 818-222-9200, FAX +1 818-436-0446 or E-Mail: sales@oesincorp.com or visit the website at http://www.oesincorp.com

For other Motion Control Components, Applications, and Technology from OES (Optimal Engineering Systems) go to: http://MotionControlWeb.com

See this and other Motion Control Components from OES (Optimal Engineering Solutions) are also featured on:
http://MotionShop.com
http://AllMotionBlogger.com
http://Automation-Blogger.com
http://MotionControlBlogger.com
http://motioncontrolBuyersGuide.com
http://MotionControlWeb.com
http://MotionShop.net

Motion Control – Controllers for Steppers and Servos –

Galil’s DMC-4000 Series of Ethernet/RS232 Multi-Axis Motion Controllers set the standard for high performance and value Vaughan, Ontario, Canada — Motion Control Components — The DMC-40×0 motion controller is Galil’s highest performance, stand-alone motion controller. It belongs to Galil’s latest generation motion controller family, which accepts encoder inputs up to 22 MHz, provides servo update rates as high as 32 kHz, and processes commands as fast as 40 microseconds-10 times the speed of prior generation controllers. The DMC-40×0 is a full-featured motion controller packaged with optional multi-axis drives in a compact, metal enclosure. The unit operates stand-alone or interfaces to a PC with Ethernet 10/100Base-T or RS232. The controller includes optically isolated I/O, high-power outputs capable of driving brakes or relays, and analog inputs for interfacing to analog sensors. The DMC-40×0 controller and drive unit accepts power from a single 20-80 VDC source.. The DMC-40×0 is available in one through eight-axis formats, and each axis is user-configurable for stepper or servo motor operation. With a powerful RISC processor, the DMC-40×0 controllers provide such advanced features as PID compensation with velocity and acceleration feedforward, program memory with multitasking for simultaneously running eight applications programs, and uncommitted I/O for synchronizing motion with external events. Modes of motion include point-to-point positioning, position tracking, jogging, linear and circular interpolation, contouring, electronic gearing and ecam. Like all Galil controllers, programming the DMC-40×0 is simplified with two-letter, intuitive commands and a full set of software tools such as GDK for servo tuning and analysis. Information on the DMC-40×0 Motion Controller from Galil can be viewed at: https://www.electromate.com/assets/catalog-library/pdfs/galil-motion-control/Galil_Multi_Axis_Motion_Controller_Brochure.pdf About Electromate: Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support. More on Electromate can be found at Website: http://www.electromate.com LinkedIn: https://www.linkedin.com/company-beta/209277/ Twitter: https://twitter.com/Electromate Facebook: https://www.facebook.com/electromateindustrial/ Google+: https://plus.google.com/104057418684128701566 Blog: https://electromate.wordpress.com/ For more information on the “Best Place to Work”CLICK HERE! To view Electromate’s new corporate video CLICK HERE To see all of Electromate’s Products and Application Stories featured on MotionShop.com, enter electromate in the Google custom search box (upper left, above) For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com For other Motion Control Components, Applications, and Technology from Electromate visit The ORIGIONAL: http://MotionControlBuyersGuide.com

See this and other Motion Control Components from Electromate are also featured on:
http://MotionShop.com
http://AllMotionBlogger.com
http://Automation-Blogger.com
http://MotionControlBlogger.com
http://motioncontrolBuyersGuide.com
http://MotionControlWeb.com
http://MotionShop.net

Lintech’s 100 Series Positioning Tables set the standard for high performance and value. 

Vaughan, Ontario, Canada — Motion Control Components —

Acme Screw or Ball Screw Driven Linear Motion:

The Lintech 100 series linear positioning slides are designed to maximize performance while minimizing physical size and cost. These linear slides use a low friction, preloaded, recirculating linear ball bearing system, which ride on precision ground linear square rail guide. The linear profile rails are mounted to a precision machined aluminum base, which offers a rigid support over the entire travel of the table’s carriage. The load is mounted to a precision machined aluminum carriage, which has threaded stainless steel inserts for high strength and wear life.

There are 30 different acme & ball screw options, that offer high efficiencies and long life at an economical price. These linear positioning tables are designed to allow for numerous options. They include EOT & Home switches, linear & rotary encoders, power-off electric brakes, motor wrap packages and versatile mounting brackets for multiple axis applications.

Single or Multi-Axis Configurations:

Lintech has the ability to build any of its standard positioning systems in single or multi-axis, using pre-engineered mounting brackets. Mix and match different axes for a customized linear robotics solution.

Information on the 100 Series Positioning Slide from Lintech can be viewed at: https://www.electromate.com/assets/catalog-library/pdfs/lintech/Lintech_100_110_120_catalog.pdf

About Electromate:

Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

More on Electromate can be found at

Website: http://www.electromate.com

LinkedIn: https://www.linkedin.com/company-beta/209277/

Twitter: https://twitter.com/Electromate

Facebook: https://www.facebook.com/electromateindustrial/

Google+: https://plus.google.com/104057418684128701566

Blog: https://electromate.wordpress.com/

For more information on the “Best Place to Work”CLICK HERE!

To view Electromate’s new corporate video CLICK HERE

To see all of Electromate’s Products and Application Stories featured on MotionShop.com, enter electromate in the Google custom search box (upper left, above)

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

See this and other Motion Control Components from Electromate are also featured on:
http://MotionShop.com
http://AllMotionBlogger.com
http://Automation-Blogger.com
http://MotionControlBlogger.com
http://motioncontrolBuyersGuide.com
http://MotionControlWeb.com
http://MotionShop.net

Motion Control – Synchronous Servo Motors

Greenville, DE —-Motion Control Components – Kollmorgen has launched the VLM servo motor series to fill the gap between stepper and high-performance servo motors. The new VLM series synchronous servo motors offer OEMs, machine builders and end-users, an excellent price-performance proposition in the torque range of 0.5 to 4.5 Nm continuous and 16 Nm peak, with speeds of up to 6000 rpm.

Motion Control Application –

Implantable medication delivery systems can have a decisive influence on the quality of life of the patients. In many cases, such delivery systems are vital for the survival of the patients – the systems have to be absolutely reliable. maxon motor manufactures high-precision micro drives for medication delivery systems.

Fall River, MA — Motion Control Components Application – Patients that suffer from chronic pain, metabolic disorders, diseases of the central nervous system and tumor diseases require accurately dosed medication. Here implantable medication delivery systems are used. Through the localized medication delivery, the dosage can be reduced to the required minimum. These infusion systems thus improve the quality of life of the patients. For many patients, it is only the medication delivery system that allows them to have a life outside of the clinic. Repetitive invasive, painful operations can be avoided. The risk of medication dependency and undesired side effects are reduced to a minimum. All these factors can contribute to the disease no longer being the central focus of the patient’s life.

For example, an active implant is implanted in the lower abdomen directly underneath the skin, where it delivers the medication dosage, programmed by the physician, to the body at the defined times of the day. The implantable unit has a wireless data interface to a patient interface by which the dosage can be adapted at any time. At regular intervals, the internal medication reservoir can be refilled by a specialist. The life span of the active implants measures many years and is limited only by the life of the battery. The core of the active implant is a piston pump manufactured by maxon medical, which specializes in medical technology and is a division of the maxon motor Group. However, the micro drives for implantable medication delivery systems are not comparable with customary maxon motors. In a customary motor, rotary motion is generated and yields torque and speed of rotation.

The reciprocating piston pump generates a linear movement that results in liquid pumping. The individual parts of the pump have very narrow tolerances and allow the pump volume to be adjusted with a precision of less a microliter per piston stroke.

As active implants are in direct contact with human tissue, biocompatible materials are an absolute requirement. Therefore, in most cases, titanium is used for the implants. Machining of titanium, especially safe and reliable laser welding, requires a very high level of expertise. Special testing and quality methods, such as inspecting the penetration depth, microhardness and density of the weld seams, are established procedures at maxon medical. The customer requirements on the product are thus fulfilled and the reliability and constant quality of the manufacturing processes are guaranteed. The entire assembly of the implantable micro drive takes place under cleanroom conditions.

maxon medical – Specialist for medical drive solutions and active implants

maxon medical specializes in the manufacturing of medical drive solutions for active implants. The division received ISO 13485 certification in December 2008. The quality management system and the project organization ensure safe, reliable and standard-compliant products and provide the customer with a sound basis for statutory approval of the final products.

Professional project organization and a proven risk management system allow efficient implementation of customer projects. Strict maintenance of statutory requirements has top priority in the implementation of medical technology projects with risk class IIb + III. Production processes, production systems and testing systems always fall under GMP (Good Manufacturing Practice, Commission Directive 2003/94/EC), regardless of the classification of the product.

maxon medical meets highest customer requirements – from selection of suitable suppliers to multi-tier quality control, from the individual parts to the final product. Manufacturing processes in the field of medical technology have very high documentation requirements during the entire value-added chain. All the way from the project idea to series production. In the end, a comprehensive and detailed documentation of all processes is required, including verification of process capability and traceability right back to the individual parts. This process control, matured to the last detail, characterizes maxon medical. It is an important and indispensable component of the entire production process and guarantees the high quality of the micro drives used for active implants of maxon medical.

Contact maxon for more details info@maxonmotorusa.com

Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.maxonmotor.com.

See this and other Motion Control Components from Maxon are also featured on:
http://MotionShop.com
http://AllMotionBlogger.com
http://Automation-Blogger.com
http://MotionControlBlogger.com
http://motioncontrolBuyersGuide.com
http://MotionControlWeb.com
http://MotionShop.net

Motion Control – Miniature Integrated Motor

Vaughan, Ontario, Canada — Motion Control Components — Maxon have released the new EC-i30 20W Brushless Servo Motor with Integrated Electronics. With an integrated 4 Quadrant speed controller, this latest addition to the EC-i portfolio is available as a 5-wire version. Both enable and direction versions of the motor are offered.

This high torque 20Watt 30mm diameter motor is ideal in micro fluid pump (air/gas) and medical applications such as:

• Vacuum wound therapy
• Patient vital signs monitoring
• Anaesthesia and gas monitoring
• Compression therapy
• Blood analysers
• Peritoneal dialysis
• Haemodialysis
• Portable oxygen concentrators
• Gas detection and analysis
• Fragrance distribution
• Surgery training systems

The EC-i30 20W Brushless Servo Motor with Integrated Electronics is available with an optional planetary gearhead, model GP32C, and can be customized specific to the needs of the application.

Features include:

• Cost-effective
• 20 Watt Rated
• 24VDC winding
• 4 Pole Pairs
• Speed range 250 – 6060 RPM
• Optional gearheads, encoders and drive electronics

Order your EC-I 30 20W motor with Integrated Electronics online now at-

EC-i 30 20W with Integrated Electronics Brushless Servo Motor Buy Online

Information on the EC-i 30 20W with Integrated Electronics Brushless Servo Motor from maxon can be viewed at:

EC-i 30 20W with Integrated Electronics Brushless Servo Motor Specification

About Electromate:

Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

More on Electromate can be found at

Website: http://www.electromate.com

LinkedIn: https://www.linkedin.com/company-beta/209277/

Twitter: https://twitter.com/Electromate

Facebook: https://www.facebook.com/electromateindustrial/

Google+: https://plus.google.com/104057418684128701566

Blog: https://electromate.wordpress.com/

For more information on the “Best Place to Work”CLICK HERE!

To view Electromate’s new corporate video CLICK HERE

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

See this and other Motion Control Components from Electromate featured on:

http://MotionShop.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://MotionControlMarketing.com

http://Gotcha-Stick.com