Motion Control – Yaw, Pitch, and Roll Stages
Motion Control – Van Nuys, CA – OES (Optimal Engineering Systems) has announced the release of a new series of motorized, three-axis high precision Yaw, Pitch, and Roll Stages capable of rotating an object around a fixed point in space on a spherical surface. The Yaw (lower) axis features +/- 10 degrees of travel and the Pitch (middle) axis have +/- 15 degrees of travel and the Roll (upper) axis has 360 degrees of continuous rotation in clockwise or counterclockwise directions.
The 100 mm diameter rotary table has a precision pattern of threaded holes for mounting cameras, lasers, mirrors, tooling, and fixtures weighing up to 5.0 kg (11 lbs.). Typically, Yaw, Pitch, and Roll Stages can be for used for: Identifying crystals, examining cutting edges of medical instruments, estimating hyperspectral bidirectional reflectance, gloss measurements, measurements of radiation patterns of LEDs, directing lasers, aligning mirrors, and manufacturing quartz oscillator plates using quartz cutting X-rays.
The motion control YPR-10-15-100 Series of three-axis stages have four motor options, The -01 option is Stepper Motor Driven with knobs for manual adjustments. The -02 option is driven by Three-Phase Brushless DC Servo Motors with Quadrature Optical Encoders, and -03 option is Brushed DC Servo Motors driven with Quadrature Optical Encoders. The -04 option is Stepper Motors Driven with Quadrature Optical Encoders for position verification.
The YPR-10-15-100-01 three-axis (dual Goniometers and Rotary) Stepper Motor driven stage (pictured) features +/- 0.01 degrees of repeatability, 0.05 degrees accuracy and 0.002 degrees resolution with a 10 micro step-per-step micro-stepping driver. Greater precision and faster speeds can be achieved with the Servo Motor options in this series of stages.
The Yaw-axis features a precision ground 420:1 ratio worm gear, the Pitch-axis a 300:1, and Roll-axis a 180:1 ratio. The footprint of the YPR-10-15-100 Yaw, Pitch, and Roll Stage is just 169 mm by 169 mm. The Yaw-axis and Pitch-axis have End-of-Travel limit switches, and the Roll-axis has a Home switch.
These stages require a Motion Controller that can be ordered Plug-and-Play with Mult-axis Controller, Joystick, and Keypad.
About OES – Optimal Engineering Systems, Inc. (OES) is a supplier of motorized and manual Motion Control Single and Multi-axis Stages, and Motion Controllers. High precision stages from OES includes: Linear Motion Stages, Rotary Motion Stages, Goniometer Stages, Vertical axis Stages (also called Z axis Stages, Elevator Stages, and Labjacks), and Gimbal Mounts (stages). Available as Stepper Motor Stages and Servo Motor Stages, the stages are available as a complete Plug-and-Play Motion Control System with a Single or Multi axis Controller, Joystick, Keypad, and Custom Length Cables. Capable of Submicron Positioning the Servo Motor Stages can be supplied with a Brushless DC or Brushed DC Servo Motor with Quadrature Optical Encoders for closed loop applications.
Applications include: Animation, automated assembly systems, automation, CNC machines, flight simulation, inspection systems, linear and rotary stages, machine tools, medical devices, motion control camera boom systems, optical comparators, CMMs, pan-tilt gimbals, PCB assembly & inspection, pick-and-place, positioning stages, robotics, scanners, security cameras, telescope drive mechanisms, time-lapse photography and winders, identifying crystals, examining cutting edges of medical instruments, estimating hyperspectral bidirectional reflectance, gloss measurements, measurements of radiation patterns of LEDs, directing lasers, aligning mirrors, and manufacturing quartz oscillator plates using quartz cutting X-rays.
For additional information, contact sales team at: OES, 6901 Woodley Ave.; Van Nuys, CA 91406; Telephone: 888-777-1826 or +1 818-222-9200, FAX +1 818-436-0446 or E-Mail: sales@oesincorp.com or visit the website at http://www.oesincorp.com
See this and other Motion Control Components from OES (Optimal Engineering Systems, Inc.) featured on:
OES is now on YouTube …..https://www.youtube.com/watch?v=wdUzIagcMYc
http://MotionControl-XYZ-Theta.com
http://LinearMotionBlogger.com
http://MotionControlBlogger.com
http://MotionControlBuyersGuide.com
http://Catalogs-MotionControl.com
Posted in 
