Motion Control Web

LinkedIn: https://www.linkedin.com/company-beta/209277/

Facebook: https://www.facebook.com/electromateindustrial/

motion control - best place to work

For more information on the “Best Place to Work”CLICK HERE!

To view Electromate’s new corporate video CLICK HERE

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

See this and other Motion Control Components from Electromate featured on:

Motion Control – High Precision 60 mm Vertical Elevator Stages from OES!

Posted by Editor on May 17th, 2021

Motion Control – Elevator Stages!

Van Nuys, CA – — Motion Control – The AT10-60-01, AT10-60-02 and the AT10-60-03 Motorized Elevator Stages have been released by Optimal Engineering Systems, Inc. (OES). The AT10-60-01 (shown) is driven by a Two-Phase Stepper Motor with micro-stepping capabilities. The repeatability is typically +/- 5 micron and typical positional accuracy is 15 micron. The knob for manual adjustment can be replaced with a Quadrature Incremental Optical Encoder for position verification.

Motion Control – High Precision 60 mm Vertical Elevator Stages from OES!

Posted by Editor on May 10th, 2021

Motion Control – Elevator Stages!

Van Nuys, CA – — Motion Control – The AT10-60-01, AT10-60-02 and the AT10-60-03 Motorized Elevator Stages have been released by Optimal Engineering Systems, Inc. (OES). The AT10-60-01 (shown) is driven by a Two-Phase Stepper Motor with micro-stepping capabilities. The repeatability is typically +/- 5 micron and typical positional accuracy is 15 micron. The knob for manual adjustment can be replaced with a Quadrature Incremental Optical Encoder for position verification.

Motion Control – 3/4 Inch Diameter Voice Coil Motor Features: High Speed, High Acceleration, and High Force to Size Ratio!

Posted by Editor on May 6th, 2021

Motion Control – 3/4 Inch Diameter Voice Coil Motor!

Van Nuys, CA – Moticont has introduced the GVCM-019-016-02 Linear Voice Coil Actuator (Linear DC Motor). This small 0.75 in. (19.1 mm) diameter actuator, also called an Electric Cylinder, has a high force to size ratio of 7.4 oz (2.1 N) continuous force and 23.7 oz (4.4 N) of peak force and a stroke length of 0.250 in. (6.4 mm). The housing measures just 0.625 in. long and in the fully extended position the shaft extends 0.436 in. (13.5 mm) beyond the face of the housing.

Motion Control – AMC FM-series FlexPro Digital Servo Drives are available from Electromate!

Posted by Editor on March 26th, 2021

Motion Control – Digital Servo Drives

Vaughan, Ontario, Canada — Motion Control Components — Available immediately from ADVANCED MOTION CONTROLS are three new additions to the FlexPro™ servo drive family, the FM series. Designed with compact form and power density in mind, the micro-sized drives can outperform larger-sized digital servo drives and still be integrated into tight spaces. The new FM drives are equipped with an additional interface board that makes it easy to integrate into your system with standard connectors.

Motion Control – Miniature 5/8 of an Inch Diameter Voice Coil Motor with Built-in Shaft Has High Speed, High Acceleration, and High Force to Size Ratio!

Posted by Editor on March 24th, 2021

Control – Miniature Electric Cylinder

Van Nuys, CA — Motion Control – Moticont’s GVCM-016-010-01 Miniature Linear Voice Coil Motor (Linear DC Motor) has a high force to size ratio with 5.0 oz (1.4) continuous force and 15.7 oz (4.4 N) of peak force with a housing measuring just 0.625 in. (15.9 mm) dia. by 0.375 in. (9.5 mm) long.

This motor features high acceleration/deceleration, high speed, high reliability, zero backlash and a 0.125 inch (3.2 mm) stroke length. This very small brushless servo motor is an ideal low cost replacement for pneumatic linear actuators.

Motion Control – Maxon precision motors Go to Mars AGAIN!

Posted by Editor on March 11th, 2021

Motion Control – Maxon motors on Mars!

Taunton, MA — Motion Control Products – NASA’s Perseverance rover landed on Mars on February 18th. Was there once life on Mars? This is the question that one of the most complex robotic systems ever built by humankind has set out to answer. Several of maxon’s electric drives are used for handling the soil samples—and to control the first Mars helicopter.

Will NASA, the US space agency, successfully land a fifth rover on Mars, allowing it to start its series of missions to bring Mars soil samples back to Earth? The rover named Perseverance will enter the atmosphere of the Red Planet on February 18th—after traveling a distance of more than 470 million kilometers.

Motion Control – Integrated Single and Multi-Axis Stepper Motor Controller and Driver Available from Optimal Engineering Systems, Inc. (OES)!

Posted by Editor on March 8th, 2021

Motion Control – Integrated Stepper Motor Controller and Driver

Van Nuys, CA – — Motion Control – Optimal Engineering Systems, Inc. (OES) has introduced their new ICAD Series of integrated motion controllers and drivers for 2-phase stepper motors. Available as 1, 2, 3, and 4 axes modules (pictured) they are ideal for NEMA 8 to NEMA 42 stepper motors. These compact 6.000 in. x 8.000 in. plug-and-play, integrated controllers incorporate high resolution micro-stepping drivers for precise positioning.

Motion Control – Netzer VLX-60 Two-Plate Ring Absolute Encoder for Harsh Environments is available from Electromate!

Posted by Editor on March 1st, 2021

Motion Control – Absolute Encoder for Harsh Environments

Vaughan, Ontario, Canada — Motion Control Components — Netzer VLX encoders are ideal for OEM applications. Featuring an open frame, 2 plate design, the sensor is lightweight, highly tolerant to temperature, shock, EMI, RFI and magnetic fields. It offers a unique combination of high performance at an economical cost.

The VLX-60 is a new member of the VLX series of Electric Encoders™ a product line based on Netzer Precision Motion Sensor proprietary technology. EE products are characterized by features that enable unparalleled performance including:

Low profile (<10 mm)

Hollow shaft (Stator / Rotor)

No bearings or other contact elements

High resolution and unparalleled precision

Very low weight

Holistic signal generation

Digital interfaces for absolute position

- - Extremely low profile & weight
  - Auto calibration option
  - Hollow floating shaft; no bearing or other contacts

High tolerance to temperature extremes, shock, moisture, EMI, RFI and magnetic fields

The holistic structure of the Electric Encoder™ makes it unique: Its output reading is the averaged outcome of the entire area of the rotor. This feature allows the EE a tolerant mechanical mounting and to deliver outstanding precision.

Due to the absence of components such as ball bearings, flexible couplers, glass discs, light sources and detectors along with very low power consumption enables the EE to deliver virtually failure-free performance in nearly all types of conditions.

The EE output is a digital serial synchronous with absolute position single turn.

This combination of high precision, low profile and, low weight has made Netzer Precision encoders highly reliable and particularly well suited to a wide variety of industrial automation applications.

Information on the VLX-60 Absolute Encoder from Netzer can be viewed at the link below.

CLICK HERE

About Electromate:

Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

More on Electromate can be found at

LinkedIn: https://www.linkedin.com/company-beta/209277/

Facebook: https://www.facebook.com/electromateindustrial/

For more information on the “Best Place to Work”CLICK HERE!

To view Electromate’s new corporate video CLICK HERE

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

See this and other Motion Control Components from Electromate featured on:

Motion Control – Harmonic Drive FHA-C Mini 24V Servo Actuator with Dual Absolute Encoder and Panel Mount connectors!

Posted by Editor on February 26th, 2021

Motion Control – Harmonic Drive Servo Actuator

Vaughan, Ontario, Canada — Motion Control – Components — Introducing Dual Absolute encoder versions of the FHA-C mini actuator. Featuring BiSS-C Harmonic Drive fha-24v-002bi-directional communication for both encoders. The dual encoders are incorporated in essentially the same package size as the long-standing FHA-C mini single incremental encoder version. Without increasing the size, the dual absolute encoder offers single turn absolute position at the output, without the need for battery back-up. Panel mount connectors come standard, and customers can choose between 4 exit options.

Direct Drive Linear Motor Has Integrated Encoder and Temperature Sensor for Increased Throughput!

Posted by Editor on February 13th, 2021

Motion Control – Linear Actuator Gives Higher Throughput!

Van Nuys, CA – Motion Control Products – The new patented SDLM-019-070-01-01 direct drive linear motor with integrated position and temperature sensors is the latest addition to the series of zero backlash, zero cogging, high acceleration, high speed, high resolution, long life motors from Moticont. Also known as an electric cylinder, this compact direct drive linear motor is just 0.75 in. (19.1 mm) in diameter and 2.75 in (69.9 mm) long. Protected inside the motor housing, the linear optical quadrature encoder is directly connected to the shaft for the greatest possible accuracy.

Highest throughputs are achieved by the SDLM-019-070-01-01 linear motor when operating at peak efficiency monitoring the data from the internal temperature sensor.

The SDLM-019-070-01-01 direct drive linear motor has a stroke length of 0.500 in. (12.7 mm) and a continuous force rating of 7.3 oz. (2.0 N) and peak force of 23.0 oz (6.4 N). This non-commutated direct drive servo motor features: Quiet long life, plain linear bearings, an integrated internal 1.25 micron resolution (0.000049 in.) quadrature optical encoder with differential outputs, and a non-rotating shaft. Applications include: Manufacturing (assembly and inspection equipment), sorting and packaging, semiconductor handling, medical procedure tables and instruments, antenna positioning, dampers, door & valve actuators, agricultural equipment, shaking, and adjustable office furniture.

Direct coupling of the load or stage to the low inertia non-rotating shaft eliminates backlash and allows for high acceleration/deceleration. Both ends of the actuator and shaft ends have threaded mounting holes for easy integration into new and existing applications. The SDLM-019-070-01-01 Direct Drive Linear Actuator is also available with a matching servo controller

About Moticont – About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding their customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Their modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement their product design strengths. This enables them to supply their clients with specialized small orders to high volume just-in-time deliveries.

They offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Sales Team at Moticont, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-1804, Tel: +1 (818) 785-1800, moticont@moticont.comor visit the website at http://www.moticont.com

See this and other Motion Control Components from Moticont featured on:

Motion Control – Maxon introduces a multi-axis controller for highly dynamic positioning tasks!

Posted by Editor on February 5th, 2021

Motion Control – Miniature Multi-axis Controller

Maxon is launching the next generation of Motion Controllers with its MiniMACS6-AMP-4/50/10. The controller is ideal for use in applications where PLC solutions may be too expensive or cannot meet customer-specific requirements.

Taunton, MA — Motion Control Products – Maxon’s new multi-axis controller, the MiniMACS6-AMP-4/50/10, offers precise and highly dynamic control of up to six brushed DC motors or four brushless DC motors (up to 540 W continuous output power and 1.6 kW peak output power).

The controller is an economical and compact solution for system designers who develop autonomous robots or shuttle systems

A significant advantage of the new multi-axis solution is that it is programmable with the comprehensive ApossIDE automation software and the license-free Motion Control Library (written in C). Integrated bus interfaces enable efficient data exchange with higher-level controllers; however, it is also possible to run complete process sequences autonomously, without a PLC or PC. The MiniMACS6-AMP-4/50/10 will be available in early 2021.

Motion Control – IncOder™ Inductive Angle Encoder by Zettlex available from Electromate!

Posted by Editor on January 28th, 2021

Motion Control – Inductive Angle Encoder by Zettlex!

Vaughan, Ontario, Canada — Motion Control – Zettlex position sensors (IncOders) use non-contact, inductive technology for precision angle measurement. Rather than the bulky transformers of traditional inductive sensors, Zettlex sensors use printed circuits. This enables compact, accurate, lightweight and robust position sensors with no contacts, no delicate parts, no maintenance, no hassle – just accurate measurements – all day, every day. IncOders are ideally suited to harsh environments – where potentiometers, optical or capacitive devices may prove unreliable.

IncOders have 2 main parts – a Stator and a Rotor – each shaped like a flat ring. The large bore makes it easy to accommodate through-shafts, slip-rings, optical-fibres, pipes or cables. The Stator is powered and the Rotor is passive. The Stator contains the electronics to receive power and generate an output signal. The output signal from the Stator shows the true absolute angular position of the Rotor relative to the Stator without the need of any motion.

IncOder inductive angle encoders do not require compliant or special couplings and the Rotor & Stator can simply be screwed to the host product. Precise mechanical mounting is not required and there are no bearings. Whereas optical or capacitive angle encoders can be unreliable in harsh conditions – notably with condensation or dust – Zettlex angle encoders are generally unaffected by foreign matter and IP67 rated versions are available. Unlike capacitive devices, there is no need to earth the Rotor or Stator. Robust, hard-anodized aluminium alloy housings and monolithic constructions are used throughout. There are no contacting, delicate or wearing parts, so there is no need for periodic replacement, service or maintenance. In other words, IncOder angle encoders are true ‘fit and forget’ devices.

Features include:

Robust Angular Position Measurement for Extreme Environments
High-reliability Inductive Angle Encoder Technology
Simple installation; ‘fit and forget’ technology
Non-contact technology for high reliability in extreme environments
Proven in Aerospace, Defense, Medical & Industrial applications
Over 4 million product configuration options available

CLICK HERE for information on the IncOder™ Inductive Angle Encoder from Zettlex

About Electromate:

Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

More on Electromate can be found at

LinkedIn: https://www.linkedin.com/company-beta/209277/

Facebook: https://www.facebook.com/electromateindustrial/

For more information on the “Best Place to Work”CLICK HERE!

To view Electromate’s new corporate video CLICK HERE

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

See this and other Motion Control Components from Electromate featured on:

Complete chain! igus energy chain kits in the shopping cart with one click and delivered in three days

Posted by Editor on January 26th, 2021

Motion Control – Cable Carriers

The new energy chain complete kits, which can be ordered quickly, consist of chain, trough, strain relief and separators and are easy to assemble.

igus now offers DIY kits consisting of energy supply system, interior separation, trough and mounting brackets for long travels

For users who want to order their energy chain quickly and easily and assemble it themselves, igus now has the solution: complete kits. The kits consist of an E4.1 series energy chain, an aluminium trough, matching separators, strain relief elements and a screwdriver. This means that the customer does not need to worry about a time-consuming configuration of the energy supply system. All adjustments to the chain are made directly on the equipment or machine. The complete kits are available in three inner heights for travels from 8 to 24 metres in the igus online shop and are available from stock.

When purchasing an energy chain, the customer usually has to go through a few steps in the ordering process to correctly compile the shopping cart for his energy supply. Often the right type of chain can be found quickly, but additional products such as a trough and the appropriate mounting brackets are usually required. “Every chain configuration, like every application, is individual, so the customer has a wide choice. The e-chain expert helps to configure and order the energy supply system”, explains Jörg Ottersbach, Head of the e-chain Business Unit at igus GmbH. “However, there are also customers, for example in the area of sewage treatment plants, in sawmills or in the chemical industry, who are looking for a quick and easy complete solution”, he says. Therefore, igus now offers complete kits of energy chains for travels from 8 to 24 metres directly from stock. Longer travels can be ordered with the help of the e-chain expert. The kits consist of a proven and robust E4.1 series energy chain, the appropriate mounting brackets, strain relief elements, separators, an aluminium guide trough with glide bar and one without glide bar, matching installation sets and an igus screwdriver.

Just one click to the complete chain The kits are available in a total of three inner heights from 32 to 56 millimetres. The ordering process is quick and easy: in the online shop, besides the inner height of the chain, the customer only has to decide on the desired total length, the inner width and the bend radius. With one click the kit is transferred to the shopping cart. The user receives the complete kit, including clear installation instructions, within three to five days. igus also promises a guarantee of 36 months on the complete energy supply system. The customer can easily generate the certificate online using the service life calculator. When the machine and system reaches the end of their service life and the energy chain is no longer in use, igus will take it back and guarantee pure recycling. In return, the user receives a credit note based on the net weight.

ABOUT IGUS:
igus GmbH develops and produces motion plastics. These lubrication-free, high-performance polymers improve technology and reduce costs wherever things move. In energy supplies, highly flexible cables, plain and linear bearings as well as lead screw technology made of tribo-polymers, igus is the worldwide market leader. The family-run company
based in Cologne, Germany, is represented in 35 countries and employs 3,800 people across the globe. In 2019, igus generated a turnover of €764 million. Research in the industry’s largest test laboratories constantly yields innovations and more security for users. 234,000 articles are available from stock and the service life can be calculated online. In recent years, the company has expanded by creating internal startups, e.g. for ball bearings, robot drives, 3D printing, the RBTX platform for Lean Robotics and intelligent “smart plastics” for Industry 4.0. Among the most important environmental investments are the “chainge” programme – recycling of used e-chains – and the participation in an enterprise.

For additional information, contact sales team at: Igus ,Inc., PO Box 14349; Providence, RI 02914; Telephone: +1 (877) 571-1565 or to send a message: Click Here

Contact and Igus ExpertClick Here

Request a QuoteClick Here

See this and other Motion Control Components from OES (Optimal Engineering Systems, Inc.) featured on:

Motion Control – Large Hollow Shaft Harmonic Drive Gear Unit Available from Electromate!

Posted by Editor on December 4th, 2020

Motion Control – Hollow Shaft Harmonic Drive Gear Unit

Vaughan, Ontario, Canada — Motion Control Components — The new FBS-2UH gear unit series from Harmonic Drive® features a large, hollow shaft with a compact outer diameter. The extra large hollow shaft is ideal for robots and machines requiring complex cabling to pass through the axis of rotation.

The new gear unit design features Harmonic Drive’s “S” tooth profile for optimal tooth engagement resulting in high torque, high-torsional stiffness, long life and smooth rotation.

The FBS-2UH Series is available in two sizes (25, 32) and three ratios (30:1, 50:1, and 100:1).

Key features include:

Extra large hollow-shaft diameter is our largest yet for a standard product
Compact dimensions for use in robotics
Outer diameter and hollow bore optimized for design flexibility and performance
Zero Backlash
Accuracy <1 arc-min
High torsional stiffness
High efficiency
Smooth operation

CLICK HERE for information on the FBS-2UH hollow-shaft gear unit.

About Electromate:

Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

More on Electromate can be found at

LinkedIn: https://www.linkedin.com/company-beta/209277/

Facebook: https://www.facebook.com/electromateindustrial/

For more information on the “Best Place to Work”CLICK HERE!

To view Electromate’s new corporate video CLICK HERE

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

See this and other Motion Control Components from Electromate featured on:

Motion Control – eSMART HMI Series from Exor features Cloud-Based Solutions, available from Servo2Go!

Posted by Editor on December 1st, 2020

Motion Control – Exor eSMART HMI Series

Greenville, DE —-Motion Control Components – TThe New eSMART Series HMI products from Exor combine state-of-the-art features and top performance with an outstanding design. They have been designed to offer an outstanding price/performance ratio for challenging applications. They are the ideal choice for HMI applications including factory and building automation. Exor has taken the evolution of the eSMART range and gone much further. The series now includes JM4web, Browser widget, SQL4automation and our cloud-based solutions. These powerful applications open the potential use of the eSMART series. As such we have increased the number of certifications to be used in hazardous conditions.

The eSMART series of products combine the power of JMobile – the software inside X Platform with an outstandingly robust design. With very specific applications in mind we have stripped down the eSMART to only the essential components and have created a truly class leading product.

Features include:

Full vector graphic support. Native support of SVG graphic objects, transparency and alpha blending
Screen object dynamics: control visibility and transparency, move, resize, rotate any object on screen
Multilanguage applications with TrueType fonts
Data display in numerical, text, bar graph, analog gauges and graphic image formats
Rich set of state-of-the-art HMI features: data acquisition and logging, trend presentation, alarm handling, scheduler and timed actions (daily and weekly schedulers, exception dates), recipes, security and user management, e-mail and RSS feeds
Wide selection of communication drivers available with multiple-driver communication capability
Remote monitoring and control with Client-Server functionality
Off-line and on-line simulation with JMobile Studio
Powerful scripting language for automating HMI applications. Efficient script debugger improves productivity in application development
Rich gallery of objects and symbols

Information on the eSMART HMI’s from Exor can be viewed at: https://www.servo2go.com/catalogsearch/result/?q=esmart

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak at warren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

See this and other Motion Control Components from Servo2Go featured on:

TWITTER

FACEBOOK

Motion Control – Hollow Core Voice Coil Motor Has Low Inertia, High Precision available from Moticont!

Posted by Editor on November 23rd, 2020

Motion Control – Hollow Core Voice Coil Motor!

Van Nuys, CA — Motion Control – Moticont introduces an open aperture (hollow core) voice coil or moving coil linear motor from Moticont, the HVCM-051-025-013-01. Featuring an open aperture of 0.50 in. (12.7 mm) this low cost, clean room friendly non-commutated motor is available off-the-shelf. The light weight and low inertia moving coil of the linear actuator demonstrates: High acceleration/deceleration, high speed, zero cogging, and by connecting directly to the load, zero backlash.

The HVCM-051-025-013-01 Linear actuator has a hollow core that allows for optics, illumination, laser beams, or cables to pass through, additionally, it has a continuous force rating of 5.3 lbs (23.7 N) and a peak force of 16.9 lbs (74.8 N) at a 10% duty cycle. This compact voice coil actuator measuring just 2.000 in. (50.8 mm) dia. X 1.00 in. (25.4 mm) housing length with a 0.50 in. (12.7 mm) stroke is ideal for applications such as: Medical diagnostics and testing, laser beam steering, wafer handling, laser cutting and welding, dynamic vibration absorption, optical focusing, scanning, assembly, and positioning applications.

Two 10-32 UNF-2B x 0.25 in. (6.4 mm) deep threaded mounting holes on 1.000 in. (25.4 mm) centers in the housing and coil allows for flexible and easy integration into new and existing applications. When used in closed loop applications with an adequate optional position sensor, resolutions of less then 1 micron are achievable for millions of cycles. If a longer stroke, higher force, a smaller foot print, or customized mounting is required, consult Moticont’s team of engineers. All of Moticont’s voice coil linear actuators are available as complete plug-and-play systems, including: Position sensor, servo driver, power supply, and if required with a linear position sensor.

About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding their customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Their modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement their product design strengths. This enables them to supply their clients with specialized small orders to high volume just-in-time deliveries.

They offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Sales Team at Moticont, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-1804, Tel: +1 (818) 785-1800, moticont@moticont.comor visit the website at http://www.moticont.com

See this and other Motion Control Components from Moticont featured on:

Motion Control – Yaw and Pitch Stages for the Precise Measurement of Angles or the Curvature of an Object!

Posted by Editor on November 2nd, 2020

Motion Control – Yaw and Pitch Stages

Van Nuys, CA – OES (Optimal Engineering Systems, Inc.) has introduced three high accuracy Yaw-Pitch stages. The YP110-10-01 (stepper motor driven), the YP110-10-02 (brushless servo motor driven) and the YP110-10-03 (DC servo motor driven). The Yaw-Pitch stages are ideal for the precise measurement of angles or the curvature of an object.

The pitch stage has cross roller guides and a range of travel of +/- 10 degrees. The maximum speed is 14 degrees per second with stepper motor driven version and 90 degrees per second with the servo motor driven versions. The 65 mm x 65 mm table has a precise pattern of threaded holes for fixtures or tooling and has an accuracy of 0.05 degrees and repeatability of +/- 0.01 degrees.

The rotation center height is 75 mm and the pitch axis is equipped with end of travel limit switches to signal the motion controller to stop the motion at each end. This axis also has the calibrated indicator to display the angle of rotation.

The yaw stage is capable of rotation of large angles and features a 180:1 ratio gear. The positional accuracy is 0.05 degrees and repeatability is +/- 0.01 degrees. This axis also has a calibrated indicator to display the angle of rotation and HOME signal for initialization.

The knobs of the stepper motors can be replaced with an optional optical encoder for precision position verification. The YP110-10-02 and YP110-10-03 feature servo motors and optical encoders for very precise closed loop operation and greater travel speeds.

About OES – Optimal Engineering Systems, Inc. (OES) is a manufacturer of motion control products including: Stepper motor controllers and drivers, solenoid electronics, and positioning stages and slides. Applications include: Animation, automated assembly systems, automation, CNC machines, flight simulation, inspection systems, linear and rotary stages, machine tools, medical devices, motion control camera boom systems, optical comparators, CMMs, pan-tilt gimbals, PCB assembly & inspection, pick-and-place, positioning stages, robotics, scanners, security cameras, telescope drive mechanisms, time-lapse photography and winders.

Some of the industries OES serves are: Aerospace, Astronomy, Chemical, Communications, Educational Institutes, University, Colleges, Government Agencies, National Labs, Manufacturing, Medical, Metrology, Military, Motion Control, Museum, News Agencies, Semiconductor and Test Equipment. Optimal Engineering Systems, Inc’s. competitive advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.

For additional information, contact sales team at: OES, 6901 Woodley Ave.; Van Nuys, CA 91406; Telephone: 888-777-1826 or +1 818-222-9200, FAX +1 818-436-0446 or E-Mail: sales@oesincorp.com or visit the website at http://www.oesincorp.com

See this and other Motion Control Components from OES (Optimal Engineering Systems, Inc.) featured on:

Steinmeyer Ball Screw Resource Center

OES is on Facebook

OES is on Twitter

OES Videos

Motion Control – Case Study: Precision Ground Ball Screw Drives Universal Pipetting Module!

Posted by Editor on October 15th, 2020

Motion Control Case Study – Pipetting

COVID-19 Testing / Sampling Applications

Reaching New Levels of Speed, Lifetime, and Force Sensitivity

Woburn, MA –Motion Control Components Ball Screws – Case Study –

Situation:

In the area of automated laboratory equipment, servo-controlled pipetting modules are a key component of high-throughput systems. A major, global OEM had been using an off-the-shelf linear actuator to drive the pipette. This actuator had a limited range of capability in terms of speed, positioning accuracy, and force sensitivity. Although it met the minimum technical requirements and was cost-effective, engineers soon were asked to push performance to the next level.

Challenge:

The company decided to develop a next-generation system. Throughput was essential, as it wanted to target the largest hospitals and laboratories handling tens of thousands of samples annually. The pipetting module also needed to have enhanced flexibility to support a greater variety of operations. It should allow for a wider range of speeds and be highly accurate in both positioning and bottom-finding. Engineers were also tasked with achieving a 10-year lifetime with little or no maintenance. This high lifetime was critical because their business model included free field service. To meet these new requirements, the actuator would have to be redesigned. In particular, the bearing configuration did not support the required accuracy and sensitivity. The supplier was unwilling to modify its design. Company engineers realized that they would have to design a custom actuator.

Resolution:

They came to Steinmeyer for a precision ground ball screw. They knew that Steinmeyer had world-class quality and a very wide selection of miniature screw sizes. For this project, they were able to consider shaft diameters of 5mm or 6mm, with pitch down to 0.5mm! They selected a 6mm screw to meet the challenge. Company engineers conducted extensive performance testing on the first prototype quantities. They put the new module through an exhaustive regimen of motion, and measured positioning, force sensitivity, friction torque, motor current, and other parameters. They verified that their module design met all of the new performance requirements. The company has since achieved FDA approval for the new system and formally launched commercial sales.

Future Plans:

Noise minimization is important for laboratory equipment. The next generation pipetting module will look to ensure the quietest possible operation. The OEM will be evaluating our proprietary super-finishing process called optiSLITE. This technology removes the largest irregularities left over from thread grinding of the shaft. The resulting surface yields a noticeably smoother and quieter operation.

To Download a PDF of this Case Study Go To – https://ballscrew-tech.com/2019/05/17/case-study-pipetting-module-driven-by-ground-ball-screw/

About Steinmeyer

Steinmeyer is the world’s longest continuously-operating manufacturer of commercial ball screws. In the realm of linear motion control, our company has become synonymous with precision, innovation, and exacting standards of quality.

Steinmeyer’s extensive product line is used widely in drive systems for industrial machines as well as precision positioning in optical instruments, medical devices, and other mechatronic applications.

Contact Steinmeyer for further information on their extensive product portfolio:

781-273-6220

infoUSA@steinmeyer.com

Visit Steinmeyer.com

Other Interesting Case Studies from Steinmeyer:

For the Case Study “Custom Linear Modules for Lithography Masking” CLICK HERE

For the Case Study “Wearable Pumps” CLICK HERE

See this and other Motion Control Ball Screws, Stages, Technology Notes, Custom Components from Steinmeyer featured on: