Motion Control Web

Motion Control – Precision Positioning Stages!

Van Nuys, CA —– Motion Control – Build-to-Order High Precision XZR Positioning Stages (X-axis, Z-axis, and Rotary- axis) are the newest addition to the OES (Optimal Engineering Systems, Inc.) family of motion control stages.  When specifying an XZR stage a user can select from a combination of linear stages with travel lengths of 15 mm, 30 mm, 50 mm, and 75 mm for the X and Z axes that feature high precision 1 mm per turn lead screws.  For the rotary axis a 60 mm diameter rotary table or 100 mm diameter rotary table are available.

Motion Control Innovation – Solar Powered Drone

Motion Control Innovation – XSun designs and manufactures a drone that is both energy-independent and can make its own decisions, for fully-automated missions. The company needed reliable, high-performance sub-assemblies to design it’s SolarXOne. This is why the start-up approached maxon for the propulsion system.

Fall River, MA — Motion Control Innovation -Benjamin David, benefiting from a decade of experience at Airbus Defense & Space, created the company XSun based on a rather simple idea: Adapting space technologies for use at lower altitude. This approach produced SolarXOne: A solar-powered, electrical, self-contained drone with a tandem wing design. SolarXOne, with its dragonfly-like design, has excellent aerodynamic performance and a large surface area of solar panels, to collect as much solar energy as possible. This is all within a very high-performance, fully-electric environment.

To see YouTube video click HERE

Motion Control – FDA/Dairy Washdown System

E. Longmeadow, MA – — Motion Control – Application  – Dairy machinery manufacturers are under intense scrutiny by FDA inspectors when it comes to FDA material and caustic washdown compliance. Recently, LM76 was called by a large US dairy packaging company to review a problematic portion of their filling line. After each shift, the filling line is washed-down, has a caustic foaming agent applied to kill bacteria and then is final rinsed. The caustic foaming agent was destroying – literally eating – the aluminum shaft supports while shafting exhibited pitting and showed signs of minor corrosion. Additionally, there were areas where product got trapped and these locations were havens for bacterial growth. Because this system was in-place and our customer was the end-user, LM76 engineers had to use direct drop-in replacement com¬ponents. What to do?

Motion Control –  Right Angle Gearheads

Vaughan, Ontario, Canada — Motion Control — ADVANCED Motion Controls has released a new 60A continuous FlexPro servo drive model FM060-60C-CM. This model is the second “machine embedded” version in this power range adding CANopen communication to the previously released EtherCAT version.

The 60A continuous current rating means the servo drive can operate at the 60A peak rating continuously with no need for current foldback.  This feat is impressive because the new model is in the same package size as our “micro-sized” FlexPro models meaning up to four units can fit within the footprint of a business card.

Motion Control – High Precision Elevator Stage

Van Nuys, CA – — Motion Control Components – The AZ60-A Motorized Vertical Elevator Stage from Optimal Engineering Systems, Inc. (OES) is a low profile, compact 183.7 mm x 80 mm x 38 mm x 42mm (raised), (7.232in x 3.150 in. x 1.496 x 1.654 in.) low cost, high resolution, wedge type, vertical elevator stage for applications requiring precise vertical positioning. The 60 mm x 95 mm (2.362 in. x 3.740 in.) drilled and tapped stage has a vertical travel of 4 mm (0. 157 In.).

Motion Control – Electric Cylinder!

Van Nuys, CA — motion control – Moticont has introduced their highest force linear actuator in their DDLM Linear Actuator Series. The DDLM-038-051-01Linear Actuator is a low cost non-commutated linear actuator that is easily integrated into new and existing applications, and is the ideal choice when upgrading from a pneumatic system. Compact, clean, and quiet, this fully enclosed linear actuator, also referred to as an electric cylinder, is 1.500 in. (38.1 mm) in diameter with a housing length of 2.00 in. (50.4 mm) long.

Motion Control – Application – Underwater Inspection

Motion Control – Application – Inspecting flooded pipes of power plants requires skilled, high-precision handling. And the robotic vehicles have to be optimized accordingly, for example to dive 20 m deep. The new seawater manipulator is capable of maneuvering underwater in pipes, where it can be used to perform inspections. RE motors by maxon are responsible for the dynamic drive of the robot.

Taunton, MA — Motion Control Application – In robotics, manipulators are those devices that enable physical interaction with their surroundings. For this interaction, the robotic vehicles are equipped with appropriate tools, gripper systems or measuring devices. In the case of the seawater manipulator, this equipment largely consists of high-performance cameras used for pipe inspection. Ibass, from Augsburg in Germany, develops, manufactures and distributes manipulators for various in-pipe applications: inspection, grinding, welding, retrieval or suction.

E. Longmeadow, MA – Motion Control – Low cost, SAIBO SB-LGV Straight and Curved Rail & Roller Block Systems are available exclusively from LM76 in three widths, and two styles to meet load requirements up to 7200 N. (1619 lbs). These low profile linear and curved rail systems feature: Low noise, smooth travel, high speed, low weight, high accuracy, sealed radial low friction bearings, low cost, and easy installation into new and existing applications. Long life, SB-LGV Straight and Curved Rail & Roller Block Systems are available in lengths to 2000 mm (79 in.) and curved sections with radiuses from 79.5 mm (3.13 in.) to 516.5 mm (20.3 in.) in 90O, 180O, and 360O sections.

Motion Control – 18 Bit Resolution Rotary Encoder

Vaughan, Ontario, Canada — Motion Control Components –Netzer’s world-wide patented, rugged high performance Electric Encoder™ technology, suits a wide variety of applications ranging from space and avionics, through military and defense, to instrumentation and automotive. Netzer Rotary Encoders feature absolute or incremental position feedback providing analog or digital outputs.

Motion Control – Servo Motor Three-axis Gimbal Mount!

Van Nuys, CA – Motion Control – The New AU300-AER-02 Three-axis Gimbal Mount from OES (Optimal Engineering Systems, Inc.) with Three-Phase Brushless Servo Motors and Quadrature Incremental Encoders features very high resolution and high speed.

Each axis features: Low backlash worm gear drives and precision “V” groove and cross roller bearings for high accuracy and repeatability. The typical accuracy is 0.05° equal to 180 arcsec and typical repeatability is +/- 0.01° equal to +/- 36 arcsec. The maximum travel speed of each axis is 45° per second.

Motion Control – High Continuous Force Voice Coil Motor

Van Nuys, CA – Motion Control Components – Moticont has added a new, higher continuous force, higher peak force linear voice coil motor to it’s series of 2.750 in. (69.9 mm) diameter x 3.50 in. (88.9 mm) long (housing) voice coil motors. The LVCM-070-089-03 linear voice coil motor features 40.86 lbs. (181.5 N) continuous force and 129.1 lbs. (573.4 N) peak force. This clean, quiet, efficient, low inertia, high acceleration, brushless high speed linear motor has zero cogging and features high accuracy, and a high repeatability to less than1 micron (0.00004 in.) when operated in a closed loop as a DC servo motor.

Motion Control Application – Docking System for ISS!

Motion Control Application – The European Space Agency (ESA) is working on a new system to enable easy docking between two spacecraft. maxon developed two special drive systems for this purpose.

Taunton, MA — Motion Control Application – Even though it’s been done many times before, the docking maneuver between two objects in space is always a delicate and potentially dangerous procedure. The speed is extremely high (about 28,000 km/h in case of the ISS), and corrections are difficult. For example, when the two objects are about to meet, maneuvering thrusters can no longer be used, since their exhaust plumes can cause damage. To prevent harm, cargo transporters are caught by a robotic arm installed in the International Space Station (ISS) and berthed manually. Manned spacecraft on the other hand dock directly in a computer-controlled process.

Motion Control – Stages for Corrosive Environments

Linear Motion – The above twin Linear slide system was designed for a large manufacturer of semiconductors. The vapors from a plating operation were so corrosive that linear components were failing within months of installation. LM76 designed a motion control system which was predominately stainless while some components were nickel plated.  LM76’s polymatrix, ball screw nut was a major improvement over a competitor’s system which employed a standard re-circulating ball nut.

Motion Control – A Great Place to Work!

Cost-competitive Alternative to Pneumatics, Starting at $300 US/ea

Motion Control – Vaughan, Ontario, Canada – The New LDL Programmable Electric Linear Actuator from SMAC has been designed as a cost-competitive alternative to pneumatics.  A common trend in industrial automation is that users are looking for electric alternatives to their pneumatic components for a number of reasons: increased control, improved cycle life, and reduced operating cost.

The LDL series actuator features several innovative cost reduction elements that result in a list price starting at $300 US/ea. 

Motion Control – Motorized Rotary Stage!

Van Nuys, CA —– Motion Control – Rotary Stages – A rotary stage is a component of a motion system used to restrict an object to a single axis of rotation. The terms rotary table or rotation stage are often used interchangeably with rotary stage. Our rotary stages provide accurate positioning performance in a low profile and compact footprint. They are perfect for the limitations and requirements of the laboratory and are also used in manufacturing environments. These stages are ideal for optics, measurement, alignment and other demanding applications.

Motion Control – Voice -Coil Stage

Van Nuys, CA – Motion Control – Components -– Moticont’s VCDS-051-089-01 series linear motion control voice coil stages feature a voice coil motor, a ball bearing linear slide, home switch, and an integral optical quadrature encoder with differential outputs. Measuring 13.5 in (342.9 mm) long x 4.00 in. (101.6) wide x 3.755 in. (95.4 mm) high, the VCDS-051-089-01 series stages have a linear travel of 2.20 in. (55.9 mm); a continuous force of 6.0 lbs (26.7 N) and a peak force of 19 lbs (84.3 N) (at a 10% duty cycle).

Motion Control Application – Lab Automation

Motion Control Application – When you need the accuracy but don’t have the room or the budget.

Fall River, MA – Motion Control Application – UK Robotics has recently launched a new liquid handler to shake up the lab automation market. Feedback from small biotech companies and big pharmaceuticals has been beyond the company’s wildest expectations.

The Bolton based company specializes in building integrated systems for lab automation for life sciences. They have now used their 15 years of experience in the industry to create a new two valve nanolitre microplate reagent dispenser.>/span>

Motion Control – Power-off Brakes

Vaughan, Ontario, Canada — Motion Control Components – The MPC is a power-off brake module with an output shaft. The unit mounts directly on to a NEMA C-Face servo or stepper motor and the output can also be coupled to a NEMA C-Face gear reducer. This brake is designed to decelerate or hold an inertial load when the voltage is turned off. When voltage is applied, the friction disc is released and the brake is free of torque. This power-off brake is best suited for parking brake applications used to hold a load in position, and is ideal for creating brake motor packages for small servo & stepper frame motors.

Motion Control – Vertical Lift Stage

Van Nuys, CA – — Motion Control – The AT10-120 Motorized Vertical Stage from Optimal Engineering Systems, Inc. (OES) is a high resolution, low profile, high load vertical lift stage that can be easily integrated into almost any application. The large 220 mm x 140 mm (8.7 in. 5.5 in.) drilled and tapped platform has a vertical travel of 110 mm (4.3 In.).

Motion Control – Integrated Stepper Motors

Motion Control – Integrated Step Motors fuse step motor plus drive and control components into a single device. Integrated steppers offer a space-saving design that reduces wiring and saves on cost over separate motor and drive components.

Vaughan, Ontario, Canada — Automation motion control – Integrated Stepper Motors – Ideally suited for applications such as packaging and labeling, automated test and measurement, automated assembly and life sciences, StepSERVO™ motors from Applied Motion Products provide the next evolution integrated step motor technology.