Motion Control Web – 0.5 Inch Stroke Voice Coil Motor Features High Force to Size Ratio!

Motion Control Web – Linear Actuator

motion control - electric cylinder

Van Nuys, CA – Motion Control – Moticont’s GVCM-051-025-01 Linear Voice Coil Motor features: High acceleration/deceleration, high speed, high reliability, zero backlash, high accuracy, high repeatability, and a 0.5 inch (12.7 mm) stroke length! Also referred to as an Electric Cylinder, this linear actuator is an ideal low cost, high accuracy replacement for hydraulic and pneumatic linear actuators.

motion control - moticont

This clean, compact, voice coil motor has a high force to size ratio with 5.3 lbs (23.5 N) continuous force and 16.7 lb (74.4 N) of peak force at 10% duty cycle with a housing measuring just 2.00 in. (50.8 mm) dia. x 1.00 in. (25.4 mm) long.

Motion Control Web – Select XTREME 6000, Full Ceramic Radial Bearings from CERAMICSPEED for Extreme Environment Applications!

Motion Control – Full Ceramic Ball Radial Bearings

innovations in motion control -ceramic bearings

motion control - linear motion products

Motion Control – The XTREME 6000 ZrO2 Series of Full Ceramic Radial Bearings from CeramicSpeed are designed to provide levels of performance in extreme environments beyond the capabilities of steel and even hybrid bearings. The complementing components of these bearings were carefully selected to provide the highest levels of performance in high temperatures, and adverse environments such as: Submerged in water, high pressure steam, chemicals, and caustic fluids.

Motion Control Web – High Performance Parallelogram Voice Coil Positioning Stage From Equipment Solutions Is a Complete Positioning System!

Motion Control Web – High Performance Parallelogram Voice Coil Positioning Stage

motion control - miniature stage

Forestville, CA – Motion Control – Components – The PVS-5.5 Parallelogram Voice Coil Stage from Equipment Solutions is a complete, compact high performance positioning system. This compact stage (37mm x 31 mm x 32 mm) weighing just 70 grams features a 5 mm clear aperture through the center of the motor and the friction free, flexure linking system.

motion control - equipment solutions

 

 

Non-linearity is <±0.5% throughout the stages 5 mm range of motion. PVS-5.5 Parallelogram Voice Coil Stage is ideal for optical focusing and micropositioning applications such as: Semiconductor, medical, optical testing, scanning microscopy, circuit board assembly, and micro manufacturing.

Motion Control Web- Open Frame Series of 18 Pull Type Solenoids with a 1 Inch Stroke Can Meet the Voltage, Duty Cycle, and Force Requirements of Many Applications!

Motion Control Web- Open Frame Solenoids

motion control - open frame solenoids
Motion Control – Van Nuys, CA – The S-18-100 Series of Open Frame Pull Type Solenoids from Magnetic Sensor Systems (MSS) includes 18 different solenoids to select from based on the Voltage, Duty Cycle, Attractive Force (up to 100 oz) and Stroke requirements of the user. MSS Solenoid coils typically utilize 23 to 40 AWG (American Wire Gauge) windings with Class “F” insulation for better protection of the solenoid during longer duty cycles.

motion control - mss logo blk

The S-18-100 Series solenoids are 1.000 in. wide x 0.84 in. high x 1.74 long and have a 1.00 stroke. The noncaptive plunger or actuator is 0.312 in. in diameter with a clevis end for load attachment.

Motion Control Web – Application – Monitoring Over 6,000 Miles with the Galil DMC-4020 Motion Controller

Motion Control Web – Application – Motion Controllersmotion control - controller Application
motion control - electromate- robotics

 

 

 

Vaughan, Ontario, Canada – Motion Control Application – It’s estimated over 850,000 have entered the United States unlawfully since 2002. The try and prevent this, U.S. Border Patrol agents have the arduous task of monitoring over 6,000 miles of land along the southern US-Mexican and northern US-Canadian borders. To assist in this demanding task, a number of solutions are employed. This includes rangers, canine units, helicopters, drones, ATV’s, watchtowers, and 20-foot tall walls. Even with all these efforts, it’s not enough to cover all those miles.

Motion Control Web – High Precision Linear, Pitch, Roll, and Yaw Positioning Stages Feature Four Motor Options!

Motion Control Web – Four-axes Linear, Pitch, Roll, and Roll Stages

motion control - product video
motion control - stages - custom


Van Nuys, CA – Motion Control – The new Motion Control XGGR-50-10-15-60 Series of Four-axis Linear, Pitch, Roll, and Yaw Stages from OES (Optimal Engineering Systems, Inc.) is the integration of a Linear-axis stage, two Goniometer Stages, and a Rotary Stage. The lower Linear axis stage has 50 mm of travel. The Pitch-axis is a +/- 10 degrees Goniometer, the Roll-axis is a +/- 15 degrees Goniometer, and the Yaw-axis (upper -axis) is a 60 mm diameter rotary stage capable of continuous rotation. These compact four-axis Linear, Pitch, Roll, and Yaw stages feature four motor options to meet the precision and speed of travel requirements of an application.

Watch on YouTubehttps://youtu.be/2ymH0TjI3Vc

Motion Control Web – Adhesive Dispensing Rotary Bearing Assembly

Motion Control Web – Custom Assembly

At LM76, we embrace challenges that push boundaries. While other motion control bearings competitors stick to selling standard products, we thrive on designing and manufacturing unique, low-volume specials. Ready to take on the extraordinary? 
motion control bearings assembly

Got a Special Motion Control Bearings  Applications ? call a special supplier. Oh, we have all the standard stuff too!  Call Mike Quinn at 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com!

About LM76 and “The Engineering Edge”

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

When others think catalog …   … LM76 thinks solution!

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com

engineering edge directory link

Motion Control Web – Meet the Voltage, Duty Cycle, and Force Requirements of Many Applications with a Series of 18 Push Type Open Frame Solenoids with a 1 Inch Stroke!

Motion Control Web – Push Type Open Frame Solenoid

motion control open frame solenoid

 

 

motion control - mss logo blk

 

Motion Control Solenoids – Van Nuys, CA — Push Type Solenoids from Magnetic Sensor Systems (MSS) includes a series of 18 different low-cost open frame solenoids to select from based on the Voltage, Duty Cycle, Force of up to 96 oz (26.7 N) and stroke requirements of the user. These clean, high efficiency, low-cost S-18-100-QH Open Frame Push Type Solenoids can be operated at a variety of duty cycles (voltage dependent) and are the ideal choice for: Medical dispensing, mixing, valve control, disconnects, vending machines, farm machinery, transmission shifting, fire suppression systems, cabinet locks, door controls, assembly and sorting equipment.

Motion Control Web – Compact 1.25 Micron Resolution Direct Drive Linear Actuator Features High Speed, Zero Cogging!

Motion Control Web – Electric Cylinder

motion control - electric cylinder

Van Nuys, CA – Motion Control Web – A New, compact, Electric Cylinder or Linear Voice Coil Actuator 38.1 mm (1.500 in.) in diameter, with a 12.7 mm (0.500 in.) stroke, and a housing length of 69.9 mm (2.750 in.) long has been released by Moticont.
motion control - moticont

 

This new SDLM-0038-070-01-01M Linear DC Actuator features high repeatability, 1.25 micron resolution, a continuous force of 14.5 N (3.2 lbs.), and a peak force of 45.8 N (10.3 lbs.). To operate at peak efficiency an integral temperature sensor provides data to achieve the highest possible throughput.

Motion Control Web – Miniature Direct Drive Linear Motor with Integrated Encoder and Temperature Sensor is Just 16 mm in Diameter!

Motion Control Web – Miniature Integrated Voice Coil Motor
motion control - integrated miniature linear motor

 

motion control - moticont

 

Van Nuys, CA – Motion Control Web – Moticont is introducing their new miniature 16 mm diameter SDLM-016-032-01-01 Direct Drive Linear Motor with integrated position and temperature sensors. This smallest of the fully enclosed SDLM series of linear motors features zero backlash, zero cogging, high acceleration, high speed, high resolution, and long life.

Motion Control Web – Motion Controllers for 1, 2, 3, and 4 Axis of Motion Can Be Operated as Stand-alone or Can Be Host Controlled!

Motion Control Web – Multi-axis Motion Controllers

All Motion Control - multi-axis controller
motion control - stage

 

 

 

Van Nuys, CA – Motion Control Homepage- Complementing the OES (Optimal Engineering Systems Inc.) growing line of single and multi-axis positioning stages is the Allegra Series of Stored Program Motion Control Systems Controllers. The Allegra Series of Controllers is available as a desktop (pictured) or 19 inch rack mount system.

Motion Control Web – Kollmorgen expands AKD2G versatility with the launch of new synchronized communication protocols

Motion Control – Kollmorgen Servo Drives
motion control - servo drive

motion control - electromate robotics
Motion Control – Vaughan, Ontario, Canada – Kollmorgen, a global leader in motion control systems, today announced the latest update to its AKD2G servo drive. With the introduction of these new features, Kollmorgen has broadened its offerings to additionally support PROFINET IRT and Ethernet/IP with CIP Sync alongside CANopen®*, EtherCAT®*, and FSoE time-synchronized communication protocols. Each protocol is rigorously tested with a variety of motion controllers and certified by industry standards organizations.

Motion Control Web – The #1 Choice for X-axis Linear Motion CNC Plasma Cutter Tables

Motion Control Web – Roller Blocks
motion control - roller block application

Motion Control Web – Miniature Voice Coil Stage features 1 Micron Repeatability!

Motion Control Web – Miniature Voice Coil Stage!

motion control - miniature voice coil stage

 


motion control - miniature components

 

 

Forestville, CA, — Motion Control – This VCS-10V Voice Coil Stage: 10mm of linear motion; Ball bearing guidance system; 1 micron position repeatability; 40 G’s acceleration; Non-contact electro-optic position sensor; Kinematic load mount; Direct SCA814 Servo Controlled Amplifier compatibility; 33 x 36 x 76mm, 230 grams

Motion Control Products Featured on Facebook

Motion Control – Facebook Pages

motion control- facebook

MotionShop.com invites you to check out these Facebook pages …

Motion Control – Open Aperture Voice Coil Stage Features 1 Micron Positioning Resolution!

Motion Control – Open Aperture Voice Coil Stage


motion control - moticont

 

 

Van Nuys, CA – Motion Control Components – The compact HCDS-025-038-02-B1-01 Voice Coil Stage from Moticont has a foot print of just 2.000 in. (54.0 mm) wide by 5.000 in (127.0 mm) long and features a positioning resolution of 1 micron and a 0.125 in. (3.175 mm) open aperture. This precision cross roller stage has a 0.97 in. (24.6 mm) range of motion with 1.0 lb. (4.4 N) of continuous force and 3.2 lb (14.2 N) peak force. The zero cogging, clean, quiet, efficient, low inertia, high acceleration, high speed voice coil driven stage has a built-in home switch for accurate initialization.

Motion Control – Select from the Large Variety of Precision XYZ Axis Stages to Suit Your Specific Application from Optimal Engineering Systems, Inc. (OES)!

Motion Control –  XYZ Axis Stages to Suit  Specific Applications!

motion control -xyz stage
motion control - stages - custom

 

 

Van Nuys, CA – — Motion Control – OES (Optimal Engineering Systems) has introduced a series of high precision, low cost XYZ positioning stages that can be easily integrated into new and existing applications. They are offered in 5 travel lengths for each axis, 50 mm (1.969 in.), 100 mm (3.937 in.), 150 mm (5.906 in.), 200 mm (7.874 in.), and 300 mm (11.811 in.). Any combination of lengths, motors, and lead screws are available.

Motion Control – New! Three-axis Gimbal Mounts Feature High Resolution, High Load Capacity, Stability, and Four Motor Options!

Motion Control –  Three-Axis Stage!

motion control - three-axis stage


motion control - stages - custom

Van Nuys, CA – — Motion Control – Four high resolution, high Load, high stability three axis gimbal mounts have been released by OES (Optimal Engineering Systems, Inc.). These four new AU270-YPR Three Axis (Yaw, Angular Pitch, and Roll) Gimbal Mounts were developed to be used with larger and heavier: Cameras, telescopes, directional antennas, optics, lasers, tracking and scanning systems.

Motion Control Web – Introducing the New VLM-60 Multi-turn Encoder from Netzer Precision

Motion Control Web – Multi-turn Encoder
motion control products - multi-turn encoder

motion control - electromate robotics

 

 

 

Vaughan, Ontario, Canada — Motion Control Web – Netzer is proud to introduce the new VLM-60 multi-turn, hollow shaft absolute rotary encoder, the ideal solution for smooth and continuous production with limited space.

Motion Control Web- Miniature Voice Coil Stage has 35 mm Travel and Features 200 Nanometer Position Repeatability!

Motion Control Web – Miniature Linear Voice Coil Stage

Motion Control Web- VCS-35 Voice Coil Stage: 35mm of linear motion; Optional clear aperture; Recirculating ball bearing guidance system; 200 nanometer position repeatability; 37 G’s acceleration; Direct SCA814 Servo Controlled Amplifier compatibility; 38 x 41 x 102mm, 320 grams
motion control web- miniature stage

Forestville, CA – Motion Control Web – Products – Equipment Solutions, Inc. (ESI) is a provider of engineering and manufacturing services. ESI specializes in the design and production of automation and instrumentation products including motion control components and sub systems.

motion control - equipment solutions

Powered by WordPress | | Designed by: game news | Thanks to spartacus blood and sand and backlinks