Category Archives: Servo Drives

Motion Control – Dual Axis Yaw-and-Pitch Stages Feature Full Range of Motion of Each Axis Under a Single Fixed Point in Space!

Motion Control – Yaw Pitch Stages

motion control - yaw pitch stages

motion control - OES Components

 

 

 

Van Nuys, CA – — Motion Control – A new, series of Dual-axis Yaw-and-Pitch Stages have been introduced by OES (Optimal Engineering Systems, Inc.). This new series of high precision Yaw-and-Pitch stages are ideal for precise measurements of compound curves and angles of an object during inspection or reverse engineering, laser machining and drilling, scanning, tracking, mirror positioning, and for use with coordinate measuring machines and autocollimators.

Motion Control – Integrated Spindle Drive Motor with Absolute Multi-Turn Encoder from JVL is available from Electromate!

Motion Control – Integrated Spindle Drive Motor

motion control - integrated motors


motion control - electromate robotics

 

 

Vaughan, Ontario, Canada — Motion Control Products — JVL A/S, one of the world’s leading producers in the field of integrated servo and stepper motors, is announcing a new addition to its ServoStep™ motors, a directly mountable motor for driving spindles. It’s perfect for replacing hand wheels in format change applications.

All-in-one unit

ServoStep™ has everything built-in including motor, encoder, drive electronics, control electronics with ePLC™ and optional Ethernet or CAN bus integrated into one compact unit.

Motion Control – Low Cost, Long Range of Travel, High Precision, Low Profile, Motorized, Profile Rail Linear Guide Stages Are Available from OES

Motion Control – Profile Rail Stages

motion control - linear stages


motion control -oesVan Nuys, CA – — Motion Control – Optimal Engineering Systems, Inc. (OES) has added five new profile single axis positioning stages to their AQ150 Series of linear stages. Available off-the-shelf in travel lengths of: 600 mm (23.622 in.), 700 mm (27.559 in.), 800 mm (31.496 in.), 900 mm (35.433 in.), and 1000 mm ( 39.370 in.), these stages are available with either a Two-Phase Stepper Motor or with a Three-Phase Brushless Motor with a Quadrature Incremental Optical Encoder.

New VLM Servo Motors for value conscious applications!

motion control Kollmorgen Servo Motor

 

Servo2Go-Logo

 

 

Greenville, DE —-Motion Control Components – Kollmorgen has launched the VLM servo motor series to fill the gap between stepper and high-performance servo motors. The new VLM series synchronous servo motors offer OEMs, machine builders and end-users, an excellent price-performance proposition in the torque range of 0.5 to 4.5 Nm continuous and 16 Nm peak, with speeds of up to 6000 rpm. They also provide highly flexible configuration, proven quality and high reliability. Hence, they are a very useful solution for many applications where stepper or asynchronous motors are pushed to their limits but the expense and unused dynamics of high performance servo motors is not desirable.

The many standard design and configuration options built into the range allow engineers an optimal solution from the outset, to tailor their applications and machine requirements. Thus, installation time and cost is minimized and the price-performance ratio is further improved. The VLM series motors are available with standard frame sizes of 60 mm and 90-mm or NEMA 23 and 34 in each of the six most popular motor sizes and with a choice of twelve standard windings. The extensive possibilities for shaft and mounting facilitate seamless integration into virtually any system.

Feedback options include Digital Resolver (SFD), resolver, encoder and Hall sensors. VLM motors achieve continuous torque up to 4.5 Nm and peak torque to 16 Nm and can be used in power systems with 230 VAC. And of course, the new motors meet the ROHS Directives for CE and UL certification.

Information on the Kollmorgen VLM Brushless Servo Motors available from Servo2Go.com can be viewed at: https://www.servo2go.com/products/servo-motors-drives/servo-motors/ http://www.servo2go.com/product.php?ID=101027&cat=

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak atwarren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

For other Motion Control Components, Applications, and Technology from OES (Optimal Engineering Systems) go to: http://MotionControlBuyersGuide.com

Servo2Go-Logo
Visit our Website
Twitter Link
Facebook Link

Motion Control – Customer Driven AC Servo Design

Motion Control Servo System

The mid-level, general-purpose 1S Series Servos incorporate valuable input from our customers to optimize use from design to commissioning.

Lower Costs and Total Cost of Ownership
The 1S Series eliminates up to 20% of hidden servo system costs to the customer by no longer requiring separate external parts such as servodrive controller cable, terminal block for I/O, safety cable, brake relay and absolute encoder battery and cable.  Regardless of power rating, all 1S power drives have a uniform height to simplify design and improve control cabinet air circulation. We streamlined I/O connection, replacing an external terminal and cable with a pluggable connector with push-in terminals that allows wiring to be prepared separately. In the process, we increased the number and mix of supported I/O.  The end user benefits from lower maintenance costs.

Advances for High Accuracy Machines
The 1S servomotors use a gear-less/battery-less, multi-turn 23-bit absolute encoder, 16-bit multi-turn to provide accurate position input. Advanced tuning functions help shorten settling time, allowing faster production speeds and greater throughput.
Expanded Built-in Safety Capability

Machine safety for rotating hazards takes a prominent position in equipment design since the recent changes in injury liability. To help OEMs simplify safety system design and standardize on one series without stocking many separate drives, the 1S Series servodrives offer both networked and hardwired safe torque off built in. Configuration of FailSafe over EtherCAT (FSoE) only requires connecting NX Series safety control units to 1S Series servos  via open network “EtherCAT”. No wiring is required for the emergency stop of each axis for servo.
First Wave of 1S Servos

The first wave satisfies 100 W to 3 kW applications. Future releases will address power requirements of higher and lower power ratings.

To Down Load the 1S Series AC Servo System Catalog CLICK HERE

To view YouTube Video CLICK HERE

For additional on the 1S Series AC Servo System CLICK HERE

To subscribe to OMRON Newsletters CLICK HERE

To contact OMRON about this or other industrial products CLICK HERE

KEEP YOUR WORKPLACE SAFE! – GET A ‘GOTCHA-STICK” CLICK HERE

Motion Control – AMC’s µZ Plug-In Servo Drives available from Electromate!

Electromate offers Micro Z Plug-In Servo Drives from Advanced Motion Controls

Motion Control - Electromate-Logo

Vaughan, Ontario, Canada — Motion Control – µZ’s are the smallest off-the-shelf servo drives from ADVANCED Motion Controls. Pronounced ‘Micro-Z’ these plug-in drives are designed for embedded applications in a wide range of industries including: Robotics, Lab Automation, Homeland Security/Military, Electric Mobility, Medical and Packaging.

µZ servo drives are designed to drive brushless and brushed DC motors at a high switching frequency. To increase system reliability and to reduce cabling costs, the drives are designed for direct integration into your PCB. Weighing in at less than 9 grams, µZ Drives output 10A peak and 5A continuous and operate with a bus voltage range of 10-36VDC.

Designed without the need for a heatsink, the µZ’s are true featherweights with a high power to weight ratio. The µZ’s are fully protected against over-voltage, under-voltage, over-current, over-heating, and short-circuits. Depending on the model, the drives interface with digital controllers that have analog ±10V or PWM/Direction commands. These servo drives require only a single unregulated isolated DC power supply, and are fully RoHS (Reduction of Hazardous Substances) compliant.

Datasheets and Support:

AZB10A4 for ±10V Command Signals, Current Mode

AZBH10A4 for ±10V Command Signals, Hall Velocity Mode

AZBD10A4 for ±10V Command Signals, Duty Cycle Mode

AZBDC10A4 for PWM/Direction Command Signals

Stand-alone (drives with built-in interface)

AZB10A4IC for ±10V Command Signals, Current Mode

AZBDC10A4IC for PWM/Direction Command Signals

Additional features and benefits include:

  • Designed for direct board-to-board integration.
  • No heatsink and no need for additional heatsinking results in the smallest installed volume
  • Feather weight, less than 9 grams
  • Dimensions (mm) 38.1 x 38.1 x 7.34 for current mode models, 43.2 x 38.1 x 9.4 for velocity / duty cycle models
  • Dimensions (in) 1.50 x 1.50 x 0.29 for current mode models, 1.70 x 1.50 x 0.37 for velocity / duty cycle models
  • Large operational temperature range, 0-85°C
  • Compatible with low inductance motors
  • Smallest form factor of any off-the-shelf servo drive from ADVANCED Motion Controls
  • 40 kHz switching frequency

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.comor visit Electromate at: www.electromate.com

Motion Control - Electromate-Logo
Visit our Website
Motion Control - Electromate Twitter Link
Motion Control - Electromate Facebook Link
Powered by WordPress and ThemeMag