Multi-Axis Positioning System Archives

Motion Control – Build-to-Order High Precision XZG Positioning Stages (X-axis, Z-axis, and Goniometer) from OES!

March 12, 2023 Editor

Motion Control – X-axis, Z-axis, plus Goniometer from OES!

Van Nuys, CA – — Motion Control – An extensive series of XZG Positioning Stages (X-axis, Z-axis, and Goniometer) is the newest addition to the OES (Optimal Engineering Systems, Inc.) family of high precision motion control stages. Built to order, a user can select from any combination of linear stages with travel lengths of 15 mm, 30 mm, 50 mm, and 75 mm for both the X and Z axes that feature high precision 1 mm per turn lead screws, and if required travel lengths over 100 mm are also available. Additionally, any of three goniometers with +/-10, +/-15, +/-45 degrees of travel can be selected and mounted in a horizontal (pictured) or vertical orientation.

Additionally, four motor options are the: -01 version which has Stepper Motor driven axes, -02 version has Three Phase-Servo Motor driven Axes, -03 version has DC Servo Motor Driven Axes and -04 version has Stepper Motor Driven Axes with Quadrature Optical Encoders for position verification.

Motion Control – Linear Focus Actuator from Equipment Solutions Features 200 Nano Meters Repeatability!

February 05, 2023 Editor

Motion Control – Miniature Linear Focus Actuator

Forestville, CA, – — Motion Control – This LFA-0604 Linear Focus Actuator: Flexure guidance system, 6 millimeter clear aperture, 4 millimeters of linear motion, 90 G’s acceleration (no load), 200 nanometers positioning repeatability, non-contact electro-optic position sensor, direct SCA814 Servo Controlled Amplifier compatibility, 38mm x 24mm, 80 grams

Motion Control – Miniature Voice Coil Servo Motor Features: 12.7 mm Stroke, High Force-to-Size Ratio, and 1 Micron Resolution!

February 02, 2023 Editor

Motion Control – Voice -Coil Stage

Van Nuys, CA – Motion Control – Components -– Moticont has released the miniature GVCM-016-019-01M Linear Voice Coil Servo Motor. Smaller in diameter than a US Dime this 15.9 mm (0.625 in.) diameter Servo motor, also called an Electric Cylinder, features a high force-to-size ratio of 1.5 N (5.3 oz) continuous force and 4.6 N (16.6 oz) of peak force. The compact housing is just 19.1 mm (0.63 in.) long and in the fully extended position the shaft extends 20.0 mm (0.79 in.) beyond the face of the housing. The end of the shaft has an M2.2X0.45 thread by 4.0 mm long for backlash free connections.

Motion Control – Low Profile, High Precision Motorized Cross Roller Linear Stages

January 30, 2023 Editor

Motion Control – Precision Linear Stage

Van Nuys, CA – Optimal Engineering Systems, Inc. (OES) offers a high precision series of low cost, low profile motorized single axis positioning stages. The compact AQ110 Series of four cross roller linear stages have travel lengths of 15 mm (0.590 in), 30 mm (1.181 in), 50 mm (1.968 in), and 75 mm (2.952 in). Open loop repeatability of all stages is 0.5µ using a 10 mirco- steps-per-step Step Motor Driver or just 0.25µ using a 20 mirco-steps-per-step Step Motor Driver. Precision ground lead screws with just 2µ of backlash and high precision cross roller linear travel guides assures repeatability of 5µ, and positional accuracy of 10µ.

Motion Control – Linear Focus Actuator from Equipment Solutions features 200 Nanometer position Repeatability!

January 18, 2023 Editor

Motion Control – Linear Focus Actuator features 200 Nanometer repeatability!

Forestville, CA, – — Motion Control – This Custom LFA-2003 Linear Focus Actuator Features: 20 millimeter clear aperture, 3 millimeters linear motion, 200 nanometer position repeatability, Flexure guidance system, ‘C’ mount lens adapter, integrated coil temperature sensor, direct SCA814 Servo Controlled Amplifier compatibility, 74mm x 61mm, 690 grams.

Motion Control – High Precision Three-axis Gimbal Mount from OES!

December 01, 2022 Editor

Motion Control – Gimbal Mount Stage

Van Nuys, CA – — Motion Control – The high precision, AU300-XZ Motorized Three-axis Gimbal Mount from Optimal Engineering Systems, Inc. (OES) features full 360 degree rotation of each axis. The rigid black anodized aluminum alloy frame of the three-axis gimbal mount handles loads to 10kg (22.5 lbs) and has the clearance (300 mm x 300 mm, 11.8 in. x 11.8 in.) necessary for mounting lasers, cameras, optics, and instrumentation for pointing, scanning, tracking, positioning, and other applications.

The Azimuth stage rotary table, has a compact 214 mm x 214 mm (8.425 in. x 8.425 in.) foot print for easy integration into new and existing applications. The azimuth, elevation, and roll stages all feature powerful bi-directional stepper motors capable of microstepping and with knobs for manual adjustments.

Motion Control – Miniature Voice Coil Stage features 1 Micron Repeatability!

November 27, 2022 Editor

Motion Control – Miniature Voice Coil Stage!

Forestville, CA, — Motion Control – This VCS-10V Voice Coil Stage: 10mm of linear motion; Ball bearing guidance system; 1 micron position repeatability; 40 G’s acceleration; Non-contact electro-optic position sensor; Kinematic load mount; Direct SCA814 Servo Controlled Amplifier compatibility; 33 x 36 x 76mm, 230 grams

Motion Control – Compact 0.750 Inch Diameter Voice Coil Motor Features A 1.500 Inch Stroke and High Force-to-Size Ratio!

November 14, 2022 Editor

Motion Control – Long Stroke Voice Coil Motor!

Van Nuys, CA — Motion Control – Moticont has added a 0.750 in. (19.1 mm) diameter (smaller than a US Quarter) Linear Voice Coil Motor, to their expanding line of voice coil or moving coil motors. The LVCM-019-048-02 Linear Voice Coil Motor is a true servo motor featuring zero cogging, high accuracy, and high repeatability when operated in a closed position loop. Voice Coil Motors (also referred to as actuators) are clean, quiet, efficient, brushless high speed linear servo motors.

This small LVCM-019-048-02 diameter actuator has a 1.500 in (38.1 mm) stroke length and a high-force-to-size ratio of 7.4 oz (2.1 N) and a peak force of 23.5 oz. (6.5 N) at 10% duty cycle.

Motion Control – Miniature Voice Coil Stage has 35 mm Travel and Features 200 Nanometer Position Repeatability!

November 12, 2022 Editor

Motion Control – Miniature Linear Voice Coil Stage

Motion Control – VCS-35 Voice Coil Stage: 35mm of linear motion; Optional clear aperture; Recirculating ball bearing guidance system; 200 nanometer position repeatability; 37 G’s acceleration; Direct SCA814 Servo Controlled Amplifier compatibility; 38 x 41 x 102mm, 320 grams

Forestville, CA – Motion Control – Products – Equipment Solutions, Inc. (ESI) is a provider of engineering and manufacturing services. ESI specializes in the design and production of automation and instrumentation products including motion control components and sub systems.

Motion Control – High Precision XYR Alignment Stage Has Better Than +/- 3 Micron Accuracy!

November 01, 2022 Editor

Motion Control – Alignment Stage!

Van Nuys, CA – — Motion Control -Optimal Engineering Systems, Inc. (OES) has introduced the XYR-300-400 Alignment Stage offering +/- 3 micron accuracy for industrial, medical, semiconductor, production, research, and laboratory applications. The XYR-300-400 Alignment Stage features +/- 15 mm of travel in the X and Y axes and +/- 5 degrees of rotation (theta). It moves in XY-plane and rotates around the center of the XY-plane.

The XYR-300-400 Alignment Stage feature linear resolutions of the X and Y axis of 1 micron resolution with a 10 micro-steps per step motor driver and static parallelism of less than 0.05 mm.

Motion Control – Very Stable, High Precision, High Load, Low Cost Motorized Vertical Lift Stage from OES!

October 18, 2022 Editor

Motion Control – Vertical Lift Stage

Van Nuys, CA – — Motion Control Components – The AT20-100 Motorized Vertical Lift Stage from Optimal Engineering Systems, Inc. (OES) is a very stable, high precision, high load vertical lift stage that can be easily integrated into almost any application. The large 120 mm x 180 mm (4.72 in. x 7.08 in.) drilled and tapped platform has a vertical travel of 100 mm (3.93 in.) and features: 3.315 µ (non- Micro-Step) resolution, 5 µ repeatability, and 15 µ positional accuracy. The precision ground lead screw, precision linear bearings, and the rigid box construction of the moving component of the elevator stage assures smooth, flat (parallel to mounting surface) vertical motion.

Motion Control – High Precision Built-to-Order XZR Positioning Stages Available from OES!

September 19, 2022 Editor

Motion Control – Precision Positioning Stages!

Van Nuys, CA —– Motion Control – Build-to-Order High Precision XZR Positioning Stages (X-axis, Z-axis, and Rotary- axis) are the newest addition to the OES (Optimal Engineering Systems, Inc.) family of motion control stages. When specifying an XZR stage a user can select from a combination of linear stages with travel lengths of 15 mm, 30 mm, 50 mm, and 75 mm for the X and Z axes that feature high precision 1 mm per turn lead screws. For the rotary axis a 60 mm diameter rotary table or 100 mm diameter rotary table are available.

Motion Control – Measure Very Small Angular Displacements of Very Small Components with Low Cost Digital Autocollimator!

June 30, 2022 Editor

Motion Control – Miniature Autocollimator

Forestville, CA, Motion Control — The AC201 Digital Autocollimator is a high performance 2-axis non-contact digital angular displacement sensors. This new series of digital autocollimators builds on the field proven AC400 digital autocollimators previously offered. Like the AC400 series this new generation of autocollimators were specifically developed for companies that produce instrumentation or tooling requiring high precision alignment.

The AC201 Digital Autocollimator is a high performance 2-axis non-contact digital angular displacement sensors. This new series of digital autocollimators builds on the field proven AC400 digital autocollimators previously offered. Like the AC400 series this new generation of autocollimators were specifically developed for companies that produce instrumentation or tooling requiring high precision alignment.

Motion Control – Dual Axis Yaw-and-Pitch Stages Feature Full Range of Motion of Each Axis Under a Single Fixed Point in Space!

June 06, 2022 Editor

Motion Control – Yaw Pitch Stages

Van Nuys, CA – — Motion Control – A new, series of Dual-axis Yaw-and-Pitch Stages have been introduced by OES (Optimal Engineering Systems, Inc.). This new series of high precision Yaw-and-Pitch stages are ideal for precise measurements of compound curves and angles of an object during inspection or reverse engineering, laser machining and drilling, scanning, tracking, mirror positioning, and for use with coordinate measuring machines and autocollimators.

Motion Control – Dual Axis Cross Roller Bearing Voice Coil Stage Features 200 Nanometers Positioning Repeatability!

June 03, 2022 Editor

Motion Control – Stage Features 200 Nanometers Repeatability!

motion cotrol - miniature xy stage

Forestville, CA, – — The motion control – VCS-XY1010 Dual Axis Voice Coil Stage: Cross roller bearing guidance system; Reaction force cancellation system; 10mm of linear motion each axis; 35 G’s acceleration, no load; 200 nanometers positioning repeatability; Non-contact electro-optic position sensor; Direct SCA814 Servo Controlled Amplifier compatibility; 38 x 251 x 254mm, 1120 grams.

Motion Control – Linear Voice Coil Motor Sets A New Standard for Miniature!

April 26, 2022 Editor

Motion Control – Miniature Linear Voice Coil Motor!

Van Nuys, CA -Motion control – Moticont Introduces their smallest linear voice coil motor! The LVCM-010-013-01 Linear Voice Coil motor is only 0.375 in. (9.5 mm) in diameter and the length at mid-stroke is just 0.81 in. (20.7 mm) long. However, this new miniature voice coil motor has a high force-to-size ratio with a continuous force of 1.0 oz (0.28 N), a peak force of 3.2 oz (0.88 N), and a 0.25 in. (6.4 mm) stroke

A clean brushless DC linear servo motor which has high acceleration/deceleration and low inertia, the LVCM-010-013-01, is highly efficient, and ideal for: Haptic feed back in medical/surgical instruments, vibration damping, work holding and clamping, laser machining and drilling, assembly, sorting, packaging, sampling, scanning, laser beam steering and filtering, wafer handling, and pharmaceutical applications.

Motion Control – Miniature Linear Focus Actuator Features <50 Nanometer Positioning Resolution!

February 21, 2022 Editor

Motion Components – Miniature Linear Focus Actuator

Motion Components – LFA-1007 Linear Focus Actuator: 10mm clear aperture, 7mm range of motion, <50 nanometer positioning resolution, 50 grams moving mass, 70 x 70 x 50 (600g)

Forestville, CA — Motion Components – Linear Focus Actuator – The LFA-1007 is a high performance compact positioning actuator. It was specifically developed for applications requiring both high precision and high-speed positioning over a short to medium stroke. This product mates the voice coil motor to a perfectly smooth flexure guidance system and a very high resolution position feedback encoder.

Motion Control – Low Cost, High Precision 3 Axes Linear Voice Coil Actuator!

February 08, 2022 Editor

Motion Control – XYZ Axis Voice Coil Actuator

Van Nuys, CA – Moticont has released a new three axis XYZ linear actuator the XYZ-10. The X and Y axes of the actuator each has a 0.97 in. (24.6 mm) of travel and the Z axis has a stroke of 0.500 in. (12.7 mm).

The high speed, high acceleration, zero cogging, brushless voice coil motors provides 6.3 lbs (28.2 N) of force and peak forces of 20.0 lbs (89.9 N) at a 10% duty cycle for the X and Y axes. The Z axis linear actuator has a continuous force of 21.2 oz (5.9 N) and 67.0 oz (18.6 N) peak force.

Motion Control – Electric Cylinder from Moticont Has Zero Cogging and High Throughput!

October 09, 2021 Editor

Motion Control – Electric Cylinder Has Zero Cogging

Van Nuys, CA — Motion Control – Moticont has added another non-commutated linear actuator to its DDLM series of low cost actuators.

The 0.125 in. (3.2 mm) diameter shaft has an internal thread on each end, a total of length of 4.960 in (126.0 mm), and extends 1.585 in. (40.3 mm) past the mounting end of the actuator. The shaft extends thru the 3/8-32 UNF x 0.250 (6.4 mm) long threaded studs at each end of the housing which can be used for mounting the DDL-019-070-01 linear actuator. Long life plain linear bearings support the internal shaft at both end of the actuator.

Linear Motion – Custom Manufacturing Of Complete Systems & Components by LM76!

June 03, 2019 Editor

Linear Motion – LM76 Expands Custom Manufacturing Capabilities!

LM76 has greatly expanded their capabilities for machining of shafting and the manufacturing of complete systems and custom components.

To compliment the expanded manufacturing facility LM76 has developed a State-of-the-Art Inspection Lab as well.

Precision Shafting –

Specifiers can specify custom modifications to shafting …

RC60, 440c, 300 series Stainless Steel, and Ceramic Coated Aluminum, and other exotic materials shafting can be custom drilled, and supplied with custom ends.

For additional information go to:

http://lm76.com/linear_shafting.htm

… Components, and …

For additional information go to: http://www.lm76.com/General%20PDF%20For%20Web_opt(Autosaved)PDF2.pdf

… Complete Motion Control Systems!

Custom linear motion components and complete custom linear motion systems can be designed and fabricated to meet critical specifications for tooling from Aluminum or Stainless Steel. Discuss you needs with LM76’s talented engineers for help with any linear motion problem including USDA/FDA applications.

For Additional information go to:

http://www.lm76.com/Linear%20Slide%20Catalog%202014.pdf

About LM76

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

For all of the LM76 Catalogs go to:

http://lm76.com/PDF%20Catalogs.htm

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail:mquinn@lm76.com or visit the website at http://www.lm76.com

See this and other Motion Control Components from LM76 featured on:
http://MotionShop.com
http://AllMotionBlogger.com
http://Automation-Blogger.com
http://motioncontrolBuyersGuide.com
http://MotionControlWeb.com
http://MotionShop.net
http://Catalogs-MotionControl

Follow Us!

Pages

Posts

Category Archives: Multi-Axis Positioning System

Motion Control – X-axis, Z-axis, plus Goniometer from OES!

Motion Control – Miniature Linear Focus Actuator

Motion Control – Voice -Coil Stage

Motion Control – Precision Linear Stage

Motion Control – Linear Focus Actuator features 200 Nanometer repeatability!

Motion Control – Gimbal Mount Stage

Motion Control – Miniature Voice Coil Stage!

Motion Control – Long Stroke Voice Coil Motor!

Motion Control – Miniature Linear Voice Coil Stage

Motion Control – Alignment Stage!

Motion Control – Vertical Lift Stage

Motion Control – Precision Positioning Stages!

Motion Control – Miniature Autocollimator

Motion Control – Yaw Pitch Stages

Motion Control – Stage Features 200 Nanometers Repeatability!

Motion Control – Miniature Linear Voice Coil Motor!

Motion Components – Miniature Linear Focus Actuator

Motion Control – XYZ Axis Voice Coil Actuator

Motion Control – Electric Cylinder Has Zero Cogging

Linear Motion – LM76 Expands Custom Manufacturing Capabilities!

Categories