Category Archives: Motors – AC Servos

Motion Control – The World’s Most Precise Six-axis Robot by Mecademic!

Motion Control –  Six-axis Robot!

motion control - robot


motion control - electromate- robotics

 

 

 

Vaughan, Ontario, Canada — Motion Control Components — Mecademic is a Canadian robotics manufacturer that builds the world’s smallest, most precise, and easy-to-use industrial robotic arm, the Meca500. The Meca500 robot excels in the precise and repetitive manipulation of small parts and tools in a variety of industries.

The six-axis robot can handle payloads up to 500 g with an unmatched accuracy of 0.005 mm (5 µm).

Motion Control – Electromate Recognized with 2021 AHTD Foundation Award!

Motion Control – Electromate 2021 AHTD Foundation Award!

motion control - electromate components


motion control - electromateToronto, Ontario – June 18, 2021 – Electromate received a Foundation Award from the Association for High Technology Distribution (AHTD), recognizing the company’s 25 years of membership and support. This is the first year the Award has been given, honoring a small group of members out of approximately 300 automation solution providers and manufacturers.

The AHTD is dedicated to maximizing the productivity, growth, and enterprise opportunities of its high-tech automation solution provider and manufacturer members. These goals align with Electromate’s commitment to driving innovation, identifying emerging technologies and products, promoting the education of automation and motion control, and fostering its relationships with industry peers.

Motion Control – Maxon precision motors Go to Mars AGAIN!

Motion Control – Maxon motors on Mars!

motion control - miniature motors

 

 

 

 

 

 

 

Taunton, MA — Motion Control Products – NASA’s Perseverance rover landed on Mars on February 18th. Was there once life on Mars? This is the question that one of the most complex robotic systems ever built by humankind has set out to answer. Several of maxon’s electric drives are used for handling the soil samples—and to control the first Mars helicopter.

motion control - maxon motors

Will NASA, the US space agency, successfully land a fifth rover on Mars, allowing it to start its series of missions to bring Mars soil samples back to Earth? The rover named Perseverance will enter the atmosphere of the Red Planet on February 18th—after traveling a distance of more than 470 million kilometers.

Motion Control – COVID-19 … Important Information for Ventilator Manufacturers!

Motion Control – ATTENTION – Ventilator Manufacturers!

motion control - ventilator components

 

motion control - electromate logo

 

 

Vaughan, Ontario, Canada — Motion Control Components — COVID-19 has caused a significant shortage of ventilators for the most seriously ill patients. We are facing a global shortage of equipment and have precious little time to respond.

Electromate is a mechanical ventilator component supplier and works with a number of manufacturing partners that supply crucial components needed to build more ventilators.

These include:

  • HMI’s
  • Linear guides
  • Linear actuators
  • Screw assemblies
  • Compact gearboxes
  • High efficiency servo & stepper motors
  • Programmable motion controllers and drives

Our team of motion design experts are located all across Canada and are available right now to help you with any electro-mechanical ventilator design. If you are working on a ventilator involving rotary, linear, or any other motion, we will provide immediate help with electro-mechanical engineering and component sourcing. Contact us today.

We are already working with ventilator and respirator companies and encourage any other businesses working on COVID-19 solutions to reach out to us.

All inquiries regarding ventilator components or any other equipment to help battle COVID-19 are given utmost priority. We can help to optimize your design quickly and provide fast turnaround proposals as requested. Additionally, we are able to meet high production demands in a very short time by utlilizing ‘Medical Fast Track Programs’ -info.us@maxongroup.com from maxon, and other vendors.

Many of the products we sell to the medical technology sector have ISO 13485 certification. This certification confirms that these products adhere to the fundamental requirements of medical technology and that all processes and procedures are documented, thereby guaranteeing traceability.

In addition to helping with the design and acquisition of critical components used in ventilators and respirators, we also want to make you aware of initiatives that you may be able to utilize. Please read below to learn more about these programs and how you can assist with the COVID-19 cause.

CODE LIFE VENTILATOR CHALLANGE

The Montreal General Hospital Foundation, in collaboration with the Research Institute of the McGill University Health Centre (RI-MUHC), is launching a global innovation challenge, backed by a prize of $200,000 CAD. They are calling for teams to design a simple, low-cost, easy-to-manufacture and easy-to-maintain ventilator which could be deployed anywhere needed to save lives.

motion control - ventilator components

To learn more, please visit https://www.mghfoundation.com/en/news/code-life-ventilator-challenge/

 

 

MIT EMERGENCY VENTILATOR (E-VENT) PROJECT COPY

MIT has launched an emergency research project with a team of Engineers and American clinicians to address the question:

Is it possible to safely ventilate a COVID-19 patient by automatically actuating a manual resuscitator?

Their process in approaching this question is to first identify the minimum requirements for a low-cost ventilator, based on the collective wisdom of many clinicians, design against these requirements, conduct immediate testing, report the results, iterate and facilitate discussion.

motion control - medical components

To learn more, please visit https://e-vent.mit.edu/

 

 

About Electromate:

Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

More on Electromate can be found at

Website: http://www.electromate.com

LinkedIn: https://www.linkedin.com/company-beta/209277/

Twitter: https://twitter.com/Electromate

Facebook: https://www.facebook.com/electromateindustrial/

Blog: https://electromate.wordpress.com/

motion control - electromate

For more information on the “Best Place to Work”CLICK HERE!

To view Electromate’s new corporate video CLICK HERE

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com


See this and other Motion Control Components from Electromate featured on:

http://MotionShop.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://MotionControlMarketing.com

http://Gotcha-Stick.com

motion control - electromate

Motion Control – The World’s Most Compact 3000 W Integrated Servo Motor

Motion Control – Compact 3000 W Integrated Servo Motor

Motion Control Integrated Servo Motor

 

Motion Control - Electromate-Logo

JVL presents a new AC Servo Motor with built-in controller, Nano-PLC and direct AC mains supply with same capacity and length as traditional servo motors

Vaughan, Ontario, Canada — Motion Control Components – JVL, the European leader in the development of integrated servo and stepper motor technology, has now again developed a new and unique product in the field of integrated motor control. JVL’s newest additions to their portfolio is a complete, high-capacity MAC motor® with rating of 3000W. MAC motor®s are complete servo systems including a high-dynamic AC servo motor, hall-sensors, encoder, power supply, driver and positioning controller and Nano-PLC, as well as facilities for incorporating various control modules such as Bluetooth, WLAN, ZigBee, EtherCAT, EtherNet/IP, CANopen, DeviceNet, Profibus, Profinet, Nano PLC, RS232/RS485/USB, Process Control, etc.

New Compact Motor

The MAC motor sets completely new standards for the performance and size of servo controls. With a length of only 311.8mm for a 3000W motor with a torque of 9.55/28.6Nm at 3000rpm, this MAC motor matches the size of traditional servo motors without built-in controllers with flange 130x130mm. This has only been possible through the use of extremely compact motors and the development of electronics and mechanics that utilise the latest technologies and manufacturing methods. So what about vibrations and temperature? As with the other integrated servo motors in the range (50-3000W), both the motor and all electronic components have been specifically selected to withstand the rigorous demands required by industrial use.

Power Supply and Energy Savings

Powering this motor is easy since it only requires connection of the main voltage of 3x400VAC through the M23 connectors. Control voltage for the encoder and microprocessor circuitry is 24VDC: In an emergency-stop situation, where an approved relay has cut-off the main power, encoder position and other values are maintained by this control voltage. In some applications, however, this is not needed and in those cases an optional internal 24VDC supply can be used, requiring only an AC main connection. Furthermore highly effective switching technology is used to ensure low heat generation resulting in appreciable energy savings.

Other Advantages

One of the big advantages of using the integrated MAC motors is that you don’t need to install a separate servo driver or controller in a control cabinet. This gives you many subsequent advantages: Space savings in your control cabinet, saving of expensive motor and encoder cables, saving time (and money) for cabling, noise is minimized due to internal cabling and also installation errors between driver and motor are eliminated. In addition, service is much easier, since the motor and controller can be replaced as a single integrated unit. Hence downtime is minimized and production is maximized.

Information on the MAC motor from JVL can be viewed at:

https://www.electromate.com/assets/catalog-library/pdfs/jvl%20industri%20elektronik/JVL_ld0083gb.pdf

About Electromate:

Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

More on Electromate can be found at

Website: http://www.electromate.com

LinkedIn: https://www.linkedin.com/company-beta/209277/

Twitter: https://twitter.com/Electromate

Facebook: https://www.facebook.com/electromateindustrial/

Blog: https://electromate.wordpress.com/

Electromate Best Blace to Work

For more information on the “Best Place to Work”CLICK HERE!

To view Electromate’s new corporate video CLICK HERE

 

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

See this and other Motion Control Components from Electromate featured on:
http://MotionShop.com
http://AllMotionBlogger.com
http://Automation-Blogger.com
http://motioncontrolBuyersGuide.com
http://MotionControlWeb.com
http://MotionShop.net

Motion Control - Electromate-Logo
Visit our Website
Motion Control - Electromate Twitter Link
Motion Control - Electromate Facebook Link

Motion Control ServoStep Integrated Stepper Motor in size NEMA 17, torque up to 0.8 Nm!

Motion Control Integrated Step Motors

motion control integrated stepper motor

Motion Control - Electromate-Logo

 

Vaughan, Ontario, Canada — Motion Control Components — JVL Industri Elektronik A/S, one of the world leaders in the field of integrated servo – and stepper motors introduces a new compact and slim stepper motor. The new ServoStep integrated stepper motor series MIS171 to MIS176 have a NEMA 17 42×42 mm flange and include controller with 6 different industrial Ethernet protocols, absolute multiturn encoder, closed loop and M12 connectors. This new motor family is based on the latest microprocessor and cooling technology and an advancement compared to previous designs.

All the necessary electronics in a stepper system are integrated in the motor itself and are similar to the concept used by other JVL motors, making it very easy to use in all kind of motion control stepper or servomotor applications. The motor contains everything needed to solve a modern control task, either as a stand-alone with own easy programmable motion controller or controlled from an external PLC or PC. 8 I/O points can be individually configured as digital input, digital output or analogue input. Modbus RTU or CANopen provide easy connections to a PLC or HMI. An ActiveX/OCX driver is available to make simple interface to LabView, Excel, VB or other Windows-programs. Up to 254 axis can be connected on the same RS485 bus.

Key features:
  • Industrial Ethernet. 6 Protocols 
  • Very high motor power and torque
  • Closed-loop operation with current control 
  • Absolute multiturn encoder
  • Safe Torque Off (STO) input
  • High resolution 409600 cnt/rev.
  • Speed 0-3000 in 0.01RPM steps
  • Wide supply range 7-72 VDC
  • Protection class up to IP67
  • M12 or M23 connectors
Motion Control Industrial Ethernet: 

Profinet, EtherCAT, Powerlink, EtherNet/IP, Modbus TCP or SERCOS III are available and for EtherCAT and SERCOS III synchronization and drive profiles are available. MACtalk can use Ethernet for commissioning the motor so no need for RS232/RS485 converter or additional cables. The motor has the ability to be upgraded with other protocols or newer versions of the same protocol at any time Because of the upgradeability, the JVL Industrial Ethernet module is also ‘future proof' as newer versions of the protocols will always fit into the design. The motor is equipped with two Ethernet connectors and a built-in switch, enabling line topology without any extra expensive hardware. Several LEDs, enabling technicians and operators to get a quick status overview.

Motion Control Motor range:
  • MIS171 with 0,15 Nm, length 70,5 mm. 5mm shaft 
  • MIS173 with 0,26 Nm, length 83,5 mm. 5 or 6,35mm shaft
  • MIS176 with 0,80 Nm, length 104,3 mm. 8 mm shaft

The motors can be operated as stand-alone units or controlled from a PLC or PC. The 8 I/Os can be individually configured as digital input, digital output or analog input. As standard, it is possible to communicate with holistic systems via for example Modbus RTU or CANopen. The MAC motor standard protocol that is also supported makes it possible to connect up to 254 other JVL integrated motors. The MIS17 series allows connectivity to all industrial Ethernet interfaces such as Profinet, EtherCAT, Powerlink, EtherNet/IP, Modbus TCP and SERCOS III.

Motion Control Interface: 
  • Industrial Ethernets Profinet, EtherCAT, Powerlink, EtherNet/IP, Modbus TCP and SERCOS III
  • CANopen DSP402 and DS301
  • Pulse/Direction mode for electronic gear
  • High speed position capture
  • ActiveX/OCX driver as well as JVL MacTalk Protocol
  • Strong graphic programming with + – * / calculations and advanced features
  • SSI interface for external linear or rotary absolute encoders
  • External encoder for dual closed-loop. 
  • RS485 up to 921 kbit and Modbus RTU
  • RS422 and RS485 for encoder I/O and connection to external HMI, PLC or encoder
  • Point-to-point or multi-axis operation with up to 254 JVL motors on the same RS485 bus
  • Wireless Industrial Ethernet through Bluetooth or WLAN
Motion Control Motor specification: 
  • Built-in PLC with 8 DIO, 24V or 0-5V (12bit) analog input with advanced filtering
  • Speed-precision 0.01 RPM. Acceleration-precision 1 RPM / sec.
  • Absolute multi-turn encoder
  • Built-in encoder for closed loop and stall detection and control 
  • Wide supply range of 7-72 VDC provides high torque at high speeds
  • Dual supply maintain position values etc. in emergency situations
  • Motor current 0-4 Amp RMS and 5,6 Amp peak
  • Closed-Loop operation
  • Double shaft and brake option
  • All connections with M12 connectors in IP67
  • Top or rear-end mounted M12 or M23 hybrid connector

For further information on the JVL ServoStep Series Motors, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

About Electromate:

Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

More on Electromate can be found at

Website: http://www.electromate.com

LinkedIn: https://www.linkedin.com/company-beta/209277/

Twitter: https://twitter.com/Electromate

Facebook: https://www.facebook.com/electromateindustrial/

Google+: https://plus.google.com/104057418684128701566

Blog: https://electromate.wordpress.com/

Electromate Best Blace to Work

For more information on the “Best Place to Work”CLICK HERE!

To view Electromate’s new corporate video CLICK HERE

To see all of Electromate’s Products and Application Stories featured on MotionShop.com, enter electromate in the Google custom search box (upper left, above)

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

Motion Control - Electromate-Logo
Visit our Website
Motion Control - Electromate Twitter Link
Motion Control - Electromate Facebook Link

New VLM Servo Motors for value conscious applications!

motion control Kollmorgen Servo Motor

 

Servo2Go-Logo

 

 

Greenville, DE —-Motion Control Components – Kollmorgen has launched the VLM servo motor series to fill the gap between stepper and high-performance servo motors. The new VLM series synchronous servo motors offer OEMs, machine builders and end-users, an excellent price-performance proposition in the torque range of 0.5 to 4.5 Nm continuous and 16 Nm peak, with speeds of up to 6000 rpm. They also provide highly flexible configuration, proven quality and high reliability. Hence, they are a very useful solution for many applications where stepper or asynchronous motors are pushed to their limits but the expense and unused dynamics of high performance servo motors is not desirable.

The many standard design and configuration options built into the range allow engineers an optimal solution from the outset, to tailor their applications and machine requirements. Thus, installation time and cost is minimized and the price-performance ratio is further improved. The VLM series motors are available with standard frame sizes of 60 mm and 90-mm or NEMA 23 and 34 in each of the six most popular motor sizes and with a choice of twelve standard windings. The extensive possibilities for shaft and mounting facilitate seamless integration into virtually any system.

Feedback options include Digital Resolver (SFD), resolver, encoder and Hall sensors. VLM motors achieve continuous torque up to 4.5 Nm and peak torque to 16 Nm and can be used in power systems with 230 VAC. And of course, the new motors meet the ROHS Directives for CE and UL certification.

Information on the Kollmorgen VLM Brushless Servo Motors available from Servo2Go.com can be viewed at: https://www.servo2go.com/products/servo-motors-drives/servo-motors/ http://www.servo2go.com/product.php?ID=101027&cat=

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak atwarren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

For other Motion Control Components, Applications, and Technology from OES (Optimal Engineering Systems) go to: http://MotionControlWeb.com

Servo2Go-Logo
Visit our Website
Twitter Link
Facebook Link

 

See this and other Motion Control Components from Servo2Go are also featured on:
http://MotionShop.com
http://AllMotionBlogger.com
http://Automation-Blogger.com
http://MotionControlBlogger.com
http://motioncontrolBuyersGuide.com
http://MotionControlWeb.com
http://MotionShop.net

New VLM Servo Motors for value conscious applications!

motion control Kollmorgen Servo Motor

 

Servo2Go-Logo

 

 

Greenville, DE —-Motion Control Components – Kollmorgen has launched the VLM servo motor series to fill the gap between stepper and high-performance servo motors. The new VLM series synchronous servo motors offer OEMs, machine builders and end-users, an excellent price-performance proposition in the torque range of 0.5 to 4.5 Nm continuous and 16 Nm peak, with speeds of up to 6000 rpm. They also provide highly flexible configuration, proven quality and high reliability. Hence, they are a very useful solution for many applications where stepper or asynchronous motors are pushed to their limits but the expense and unused dynamics of high performance servo motors is not desirable.

The many standard design and configuration options built into the range allow engineers an optimal solution from the outset, to tailor their applications and machine requirements. Thus, installation time and cost is minimized and the price-performance ratio is further improved. The VLM series motors are available with standard frame sizes of 60 mm and 90-mm or NEMA 23 and 34 in each of the six most popular motor sizes and with a choice of twelve standard windings. The extensive possibilities for shaft and mounting facilitate seamless integration into virtually any system.

Feedback options include Digital Resolver (SFD), resolver, encoder and Hall sensors. VLM motors achieve continuous torque up to 4.5 Nm and peak torque to 16 Nm and can be used in power systems with 230 VAC. And of course, the new motors meet the ROHS Directives for CE and UL certification.

Information on the Kollmorgen VLM Brushless Servo Motors available from Servo2Go.com can be viewed at: https://www.servo2go.com/products/servo-motors-drives/servo-motors/ http://www.servo2go.com/product.php?ID=101027&cat=

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak atwarren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

For other Motion Control Components, Applications, and Technology from OES (Optimal Engineering Systems) go to: http://MotionControlBuyersGuide.com

Servo2Go-Logo
Visit our Website
Twitter Link
Facebook Link

Motion Control – Maxon Opens Manufacturing Facility in Taunton, Massachusetts!

New Facility Expands Maxon’s Operations & Capabilities to Service US Customers.

 

Maxon Logo

 

 

 

Taunton, MA – Maxon precision motors, a division of maxon motor of Sachsein, Switzerland, has announced the opening of a new manufacturing facility in Taunton, MA. The two-story, 59,000 sq. foot facility is located within the Myles Standish Business Park in Taunton at 125 Dever Drive.

Company officials led by Chris Blake, mpm President welcomed state/local officials and invited guests to a grand opening event at the facility this morning which included a ribbon cutting ceremony and tours of the building.

The new building will provide design engineering and production operations, significantly advancing maxon precision motors presence and capabilities in North America. Its opening is an integral component in an ongoing global growth strategy underway by the privately owned Swiss company, in business since 1961.

maxon motor is the leading provider of precision DC motors and drive technology with distribution and sales in 40 countries worldwide. maxon’s products include brushed and brushless DC motors, gearheads, sensors/encoders and customized drives. Its highly engineered products are used in a wide range of industries and applications including medical technology, industrial automation, robotics, security and communications, aerospace, automotive, and measurement/testing.

The new facility replaces a former sales/distribution and assembly operation at 101 Waldron Road in Fall River, MA, and will significantly expand maxon precision motors capabilities and employment. USA customers will benefit from closer collaboration that will provide value added opportunities with faster turnaround. Plus, a localized supply chain with domestic vendors will help build stronger customer relationships while reducing lead times.

“Our vision is to be an integral part of maxon’s global growth strategy,” explained Mr. Blake, who heads up the US management team. “With expanded engineering services in place, our customers will enjoy a closer collaboration on design and manufacturing and have a more direct line to our team during concept development, which will include rapid prototyping to better execute customer-specific products.”

The new Taunton facility will include offices and conference areas, space for warehousing, and significant manufacturing space. PIt will integrate engineering with true high-volume manufacturing capabilities.

About maxon motor maxon motor is a developer and manufacturer of brushed and brushless DC motors, as well as gearheads, encoders, controllers, and entire mechatronic systems. maxon drives are used wherever requirements are particularly high: in NASA’s Mars rovers, in surgical power tools, in humanoid robots, and in precision industrial applications, for example. To maintain its leadership in this demanding market, the company invests a considerable share of its annual revenue in research and development. Worldwide, maxon employs some 2,600 workers at eight production sites and is represented by sales companies in more than 30 countries. www.maxonmotor.com

For More Information Contact: Debora Setters, National Marketing Manager, maxon precision motors, inc. Taunton, MA, dsetters@maxonmotorusa.com/508-916-6602

Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.maxonmotor.com.

Maxon Handbook Banner

Maxon Logo
Visit our Website
Order Our Catalog

Motion Control – Customer Driven AC Servo Design

Motion Control Servo System

The mid-level, general-purpose 1S Series Servos incorporate valuable input from our customers to optimize use from design to commissioning.

Lower Costs and Total Cost of Ownership
The 1S Series eliminates up to 20% of hidden servo system costs to the customer by no longer requiring separate external parts such as servodrive controller cable, terminal block for I/O, safety cable, brake relay and absolute encoder battery and cable.  Regardless of power rating, all 1S power drives have a uniform height to simplify design and improve control cabinet air circulation. We streamlined I/O connection, replacing an external terminal and cable with a pluggable connector with push-in terminals that allows wiring to be prepared separately. In the process, we increased the number and mix of supported I/O.  The end user benefits from lower maintenance costs.

Advances for High Accuracy Machines
The 1S servomotors use a gear-less/battery-less, multi-turn 23-bit absolute encoder, 16-bit multi-turn to provide accurate position input. Advanced tuning functions help shorten settling time, allowing faster production speeds and greater throughput.
Expanded Built-in Safety Capability

Machine safety for rotating hazards takes a prominent position in equipment design since the recent changes in injury liability. To help OEMs simplify safety system design and standardize on one series without stocking many separate drives, the 1S Series servodrives offer both networked and hardwired safe torque off built in. Configuration of FailSafe over EtherCAT (FSoE) only requires connecting NX Series safety control units to 1S Series servos  via open network “EtherCAT”. No wiring is required for the emergency stop of each axis for servo.
First Wave of 1S Servos

The first wave satisfies 100 W to 3 kW applications. Future releases will address power requirements of higher and lower power ratings.

To Down Load the 1S Series AC Servo System Catalog CLICK HERE

To view YouTube Video CLICK HERE

For additional on the 1S Series AC Servo System CLICK HERE

To subscribe to OMRON Newsletters CLICK HERE

To contact OMRON about this or other industrial products CLICK HERE

KEEP YOUR WORKPLACE SAFE! – GET A ‘GOTCHA-STICK” CLICK HERE

Powered by WordPress and ThemeMag