Category Archives: Linear Rail System

Motion Control – The Engineering Edge – Application – Trunnion Grinding Slide for Oil Field

Motion Control – Custom Linear Slides

Motion Control Application – We are shipping another slide today for the oil patch. When Weir Oil and Gas called with a slide application that required special engineering, LM76 was all ears – as it was right up our alley.

Motion Control – Customizable Lintech 100 Series Screw Driven Linear Stages That Ship In 1 Week Are Available from Electromate!

Motion Control – Custom Linear Stages

Lintech’s 100 Series Positioning Tables set the standard for high performance and value. 
motion control linear stages
 

 

 

 

 


Vaughan, Ontario, Canada — Motion Control Components –

Acme Screw or Ball Screw Driven Linear Motion:

The Lintech 100 series linear positioning slides are designed to maximize performance while minimizing physical size and cost.
motion control electromate robotics
These linear slides use a low friction, preloaded, recirculating linear ball bearing system, which ride on precision ground linear square rail guide.

Motion Control – The Engineering Edge – Lowest Coefficient of Friction Linear Bearings


low coefficient of friction linear bearings

Motion Control – Pegasus Linear Bearings – For the Time A Linear Bearing Simply Cannot Fail!

Motion Control – Hybrid Ceramic Ball Linear Bearings

For those times when a Linear Bearing “CANNOT” Fail!

motion control - linear bearings


motion control - linear motion products

 

 

E. Longmeadow, MA –Motion Control – LM76 has developed the most corrosion resistant linear bearing available. In space, deep under the sea, or in the harshest environments, when there can be no “Plan B,” Pegasus Series 1 Linear Ball Bearings can be counted on to perform. In some applications linear bearings will not move for days, weeks, months or even years, however, when called on to perform they must work as if they just came out of the box. LM76’s Pegasus Series 1 Linear Bearings feature Silicon Nitride (SiNi) Ceramic Balls in a shell with retainer and end caps all made from 440 Stainless Steel and then ArmorloyTM coated.

Motion Control – One Piece ETX Linear Bearing/Pillow Blocks Can Be Used In Radioactive Environments!

Motion Control- ETX Linear Bearing/Pillow Blocks

Motion Control Bearing/Pillow Block for Radioactive Environments

E. Longmeadow, MA Motion — Control Components – Linear Motion – LM76 now offers one piece ETX Linear Bearing/Pillow Blocks that will not degrade in a radioactive environment! Machined from a solid block of self lubricating ETX, linear bearing-blocks have high strength, excellent wear resistance, low coefficient of friction, and excellent dimensional stability at higher temperatures as there is no other materials such as PTFE seals or lubricants these bearing-blocks are maintenance free.

motion control - lm76

Custom designed for use in a nuclear power plant these linear bearing/pillow blocks travel on ceramic coated shafting (also supplied by LM76) completely submerged in radioactive water.

To see the “Motion Control Application – ETX Pillow/Block Bearings for Radioactive Environments” CLICK HERE

Motion Control – Integrated Spindle Drive Motor with Absolute Multi-Turn Encoder from JVL is available from Electromate!

Motion Control – Integrated Spindle Drive Motor

motion control - integrated motors


motion control - electromate robotics

 

 

Vaughan, Ontario, Canada — Motion Control Products — JVL A/S, one of the world’s leading producers in the field of integrated servo and stepper motors, is announcing a new addition to its ServoStep™ motors, a directly mountable motor for driving spindles. It’s perfect for replacing hand wheels in format change applications.

All-in-one unit

ServoStep™ has everything built-in including motor, encoder, drive electronics, control electronics with ePLC™ and optional Ethernet or CAN bus integrated into one compact unit.

Motion Control – Open Aperture XY Stages from OES Feature: High Resolution and High Repeatability!

Motion Control – Open Aperture XY Stages!

motion control- xy stages

Van Nuys, CA – — Motion Control – Two new high resolution, high repeatability XY stages have been released by Optimal Engineering Systems, Inc. (OES). The AU200-15×15-01 Motorized Stage (pictured) and the AU200-15×15-04 Motorized Stage are powered by Two-Phase Stepper Motors and have high 0.25 micron resolution and high 1.5 micron repeatability.

motion control - OES

The AU200-15×15-04 stage includes Quadrature encoders for position verification. Both stages have a large 3.54 in. x 3.54 in. (90 mm x 90 mm) platform with large open aperture and feature standard 1 mm-per-turn ground lead screws, and precision V-grove and Cross Roller guides.

Motion Control – Application – In “Off-Roading” LM76’s Black Racer Bearing is a Winner!

Motion Control – Application – Ceramic Linear Bearings

motion control - linear bearings

Motion Control – Anyone who’s worked on cars knows how critically important ball joints are to steering and suspension. They also know what happens when ball joints fail!

motion control - lm76 products

E. Longmeadow, MA – — Motion Control – Application Story – When an aftermarket manufacturer of off-road steering and suspension systems needed an upper ball joint bearing, they called LM76. These systems are purchased by off-road vehicle owners who want to upgrade their OEM steering and suspension units for hard-hitting environments. Pounding, shock, sand and debris are all part of the mix when it comes to extreme off-roading and LM76 Black Racer bearings are right at home. According to company engineers, after a year of brutal testing, Black Racer met all design goals and exceeded expectations.

Motion Control -What To Consider When Specifying A Linear Slide

Motion Control – Tutorial

Considerations when specifying a linear slide for a new or existing application.

By Mike Quinn • LM76

When a design engineer has fully defined a linear-motion application’s requirements regarding travel length, speed, force, and accuracy as well as repeatability, the next question to answer is this:

Does an off-the-shelf linear slide (or a stock linear slide from a catalog) fully satisfy the application?

motion control - lm76

Off-the-shelf linear slides are advantageous for their quick delivery and lower cost than that of custom components. No wonder most linear-motion designs do in fact employ off-the-shelf linear slides from various component and system suppliers.

motion control - linear stage

Motion Control – Low Cost, Long Range of Travel, High Precision, Low Profile, Motorized, Profile Rail Linear Guide Stages Are Available from OES

Motion Control – Profile Rail Stages

motion control - linear stages


motion control -oesVan Nuys, CA – — Motion Control – Optimal Engineering Systems, Inc. (OES) has added five new profile single axis positioning stages to their AQ150 Series of linear stages. Available off-the-shelf in travel lengths of: 600 mm (23.622 in.), 700 mm (27.559 in.), 800 mm (31.496 in.), 900 mm (35.433 in.), and 1000 mm ( 39.370 in.), these stages are available with either a Two-Phase Stepper Motor or with a Three-Phase Brushless Motor with a Quadrature Incremental Optical Encoder.

Motion Control – Use FDA Compliant Off-the-Shelf Linear Motion Components!

Motion Control – FDA Compliant Components

To: OEMs “Tooling Up” for Urgently Needed Medical Products! Use FDA Compliant Off-the-Shelf Linear Motion Components!

motion control FDA compliant components

E. Longmeadow, MA — Motion Control Components – Linear Motion – In dealing with the COVID-19 pandemic many companies have volunteered or been requested to produce urgently needed medical products such as: Masks, gowns, and ventilators. “Tooling Up” quickly to produce medical grade products for some companies can bring challenges. In addition to needing FDA compliant materials that will be used in the actual masks, gowns, and ventilators, the tooling used to manufacture these products may also need to meet FDA compliance standards. Depending on the product being manufactured, the tooling may need to be: Washed down using caustic chemicals, cleaned with high pressure steam, or sterilized with high Intensity Ultra Violet light or radiation.

Motion Control – FLUIDLINE Bearings, Pillow, and Flange Blocks From LM76 Are FDA/USDA and 3A-Dairy Compliant!

Motion Control – FDA/USDA and 3A-Dairy Compliant Bearings!

Motion Control - FDA compliant bearings


motion control - linear bearingsE. Longmeadow, MA – Motion Control Components – Linear Motion – Linear Motion – LM76 FluidLine Linear/Rotary bearings are FDA/USDA & 3A Dairy Complaint. They are also caustic wash down inert. FluidLine bearings one piece construction has benefits over traditional Teflon Composite lined aluminum bearings: if you have a wear situation, Teflon Composite Bearings have a .035″ Teflon Composite Liner. Once you wear through the liner, you are into the aluminum shell.

Motion Control – 1.25 Inch Stroke Linear Voice Coil Motor Tolerates Tilting and Misalignment is available from Moticont!

Motion Control – Linear Voice Coil Motor Tolerates Tilting

motion control - voice coil motors


motion control - moticontVan Nuys, CA — Motion Control – Moticont has added a new 1.25 in (31.8 mm) stroke linear DC motor to its series of LVCM Linear Voice Coil Motors. The new LVCM-051-051-06 Linear Voice Coil Motor has been designed with a larger radial air gap to tolerate the tilting and misalignment that can be experienced when clamping out of parallel objects or moving off-center loads. This compact linear motor is 2.000 in (50.8 mm) in dia. with a 2.00 in. (50.8 mm) long housing and at mid stroke is just 2.88 in. (73.0 mm). 
Peak force is 9.5 lb (42.2N) at a 10% duty cycle and continuous force is 3.0 lb (13.3 N). Features of this low inertia, high acceleration / deceleration, clean, efficient, zero cogging, brushless voice coil servo motor makes it ideal for: Sorting, packaging, sampling, work holding and clamping, laser machining and drilling, wafer handling, and medical and pharmaceutical applications.

Motion Control – NEW! High Speed Integrated Bearing and Drive System Features +/- 5 Microm Repeatability!

Motion Control – High Speed Integrated Bearing and Drive System

motion control - high speed drive system

E. Longmeadow, MA –Motion Control – LM76 is the Exclusive North American Distributor of a new high speed integrated bearing and drive system featuring +/- 5 micron repeatability, and zero backlash! This new X-Axis BE125-10 Open Screw Drive System sets new standards for: Length of travel, speed, and precision for Cartesian Robots (robots that move in X,Y and Z axes according to Cartesian Coordinates also know as rectangular coordinates) and single axis linear stages!

motion control - linear bearings

The new X-Axis BE125-10 Open Screw Drive System is a compact linear stage measuring 125 mm (4.921 in.) wide x 86 mm (3.386 in.) high x 4391 mm (172.874 in.) long and can handle dynamic loads to 500 kg (1102 lbs). The standard stroke length is 4000 mm (157.480 in.) and custom stroke lengths to 10 m (32.8 ft) can be specified.

The Engineering Edge – Linear Motion Application – Moving Articles of Antiquity!

Motion Control – Linear Bearings Application
motion control - engineering edge
Linear Motion Application – How Do You Move Articles of Antiquity?

Very Carefully With A High Load Rail System from LM76!

motion control - linear guides

E. Longmeadow, MA – — The Boston Museum of Fine Arts (MFA) has to move articles of antiquity from one location to another. In this instance, they are moving a 5000 year old relief (hieroglyphics) weighing 8000 pounds to a new location in the Museum. Here is a frontal photo of the Relief from The Tomb of Senenuka.

Part of wall from tomb of Senenuka; nine stones fitting together and including two niches; lower left piece smooth limestone; upper far left preliminary black ink sketch; right of this sketch is a complete relief showing two seated figures; central piece has large scene of seated male on the left and other smaller male figure to the right; upper far right male figure relief outline; left of this again a scene of two seated figures at a table.

motion control - linear bearings

Senenuka Time of Khufu or Khafre (Maybe Dyn 5?) Overseer of the Pyramid-town of Khufu, Director of King’s wad-priests, Boundary official of a settlement, etc.

The MFA contracted CBI Consulting of Boston to design the frame and fixturing. Craig Barnes, an award winning architectural engineer called Mike Quinn of LM76 to review the linear motion application. Over the course of several weeks, LM76 and design partner Todd Kanipe designed a telescoping, high load roller/linear motion rail system that won approval. According to CBI’s Keith Bouchard, the linear rail system moves very smoothly and so far meets the expectations of this program.”

Linear Motion Application – According to MFA Antiquity Specialist Jean Louis Lachevere, “All of these moves present very real dangers to the artifact being transported. In this case, we have a 8000 pound relief which already has its problems due to age and the fact that it is limestone ( limestone is very vulnerable to the atmosphere ).” Seen from the front, the relief is straight. From the back, much of the top back is gone. Thus, the back of the relief has to be plastered so the back is flat. Pins are inserted to further reinforce the relief and then it is tipped on its back. It is then moved to its new atmospherically controlled display case. LM76’s design is used in the transfer from the dolly to the mounting rails and restraints in the display case. This 36” motion is fraught with things that can go wrong. One of the considerations is the possibility of an earthquake…any problem conceivable is taken into account.

motion control - linear bearingsCastors and sliders at end of armature. The sliders are mounted to the castors and work like telescoping drawer slides.

 

motion control - linear bearing applicationCastors and sliders as seen from below. The chalk X is used to mark the block where added weld is required. Each block is to be welded both sides. Each slider is to be addressed.

 

motion control - applicationPhoto demonstrates that the wheels can rotate independently.

 

 

motion control - heavy loadView of the slider assembly at the center of the welded fixture.

 

 

 

For Additional Information on LM76’s High Load Rail Systems go to: http://www.lm76.com

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman Teflon® Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com

motion control - linear bearings

About LM76 and “The Engineering Edge”

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

When others think catalog …   … LM76 thinks solution!

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com

motion control - engineering edge

See this and other Motion Control Components fromLM76 are also featured on:
http://MotionShop.com
http://AllMotionBlogger.com
http://Automation-Blogger.com
http://MotionControlBlogger.com
http://MotionControlBuyersGuide.com
http://MotionControlWeb.com
http://MotionShop.net
Industrial Safety – Request the “Gotcha-Stick”
LM76 Blog
LM76 Catalogs

motion control - linear bearings

 

Motion Control – High Precision, Low Profile, Motorized, Ball Bearing Linear Guide Stages!

OES Logo

Van Nuys, CA – — Motion Control – Optimal Engineering Systems, Inc. (OES) offers two series of low cost, low profile, motorized ball bearing linear guide (profile rail) positioning stages. The AQ140 Series and the AQ150 Series of linear stages are available off-the-shelf in travel lengths of: 50 mm (1.969 in), 100 mm (3.937 in), 150 mm (5.905 in), 200 mm (7.874 in), 300 mm (11.811 in), 400 mm (15.748 in), 500 mm (19.685 in). These 2 µ resolution stages (achieved with a 10 micro-steps per step stepper motor driver) are ideal for: Laser machining, testing, pick-and-place, inspection, sorting, wafer handling, semiconductor, assembly, metrology, and photonics in industrial, laboratory, and medical applications.

The tables, depending on length of travel, measure 120 x 120 mm (4.73 in x 4.73 in.), 150 x 150 mm (5.90 in x 5.90 in.) and 160 x160 mm (6.30 in x 6.30 in.) The AQ150 Series has top and side rail covers. Featuring a 4 mm per turn, precision 2 µ backlash lead screw, typical performance specifications of the AQ140 and AQ150 linear stages include: repeatability of 5 µ, positional accuracy 8 µ, straightness 6 µ, driving parallelism 15 µ, pitching 25 arc seconds, and deflection 25 arc seconds.

Constructed of aluminum and black anodized, these stages can handle loads to 30 kg (66 lbs.) and 50 kg (110 lbs.). These low profile stages can easily be ordered in an XY or XYZ configuration. There is a knob on the back of the motor for manual adjustments or it can be replaced with an encoder. An optional servo motor, encoder, and brake are also available. These compact linear stages are easily integrated into new and existing systems and are available as with complete plug-and-play systems or with a plug-in motor driver. For details concerning each stage in the series please go to http://oesincorp.com/motorized-linear-stages/low-cost-series/index.htm

About OES – Optimal Engineering Systems, Inc. (OES) is a manufacturer of motion control products including: Stepper motor controllers and drivers, solenoid electronics, and positioning stages and slides. Applications include: Animation, automated assembly systems, automation, CNC machines, flight simulation, inspection systems, linear and rotary stages, machine tools, medical devices, motion control camera boom systems, optical comparators, CMMs, pan-tilt gimbals, PCB assembly & inspection, pick-and-place, positioning stages, robotics, scanners, security cameras, telescope drive mechanisms, time-lapse photography and winders.

Some of the industries OES serves are: Aerospace, Astronomy, Chemical, Communications, Educational Institutes, University, Colleges, Government Agencies, National Labs, Manufacturing, Medical, Metrology, Military, Motion Control, Museum, News Agencies, Semiconductor and Test Equipment. Optimal Engineering Systems, Inc’s. competitive advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.

For additional information, contact sales team at: OES, 6901 Woodley Ave.; Van Nuys, CA 91406; Telephone: 888-777-1826 or +1 818-222-9200, FAX +1 818-436-0446 or E-Mail: sales@oesincorp.com or visit the website at http://www.oesincorp.com

OES Logo
Visit OES Website
OES Facebook
OES Twitter
OES Videos

Motion Control – Lintech Profile Rail Linear Recirculating Bearings Are Available from Electromate!

Motion Control - Lintech MR Series, ARC Series, and HRC Series Profile Rails available from Electomate

Motion Control - Electromate-Logo

 

 

 

 

 

Vaughan, Ontario, Canada — Motion Control Components – Lintech’s MR, ARC & HRC Profile Rail Linear Recirculating Bearings incorporate two or four rows of re-circulating balls arranged in a 45 degree contact angle with the raceway. The rigidity under moment and torsional loads is increased by this design. Larger ball size is used to enhance the load capabilities. This design offers equal loading in all directions while providing smooth motion. Features of the MR, ARC & HRC series include:

  • Size 15, 20, 25, 30, 35, 45
  • N, H and P accuracy grade
  • V0, V1 and V2 block pre-load
  • Short/Normal/Long block lengths
  • Normal and Flange width styles

Lintech’s family of cost-effective short-delivery Profile Rail Linear Bearings includes:

MR Series –Miniature Profile Rail Linear Guides

motion control -  Profile Rails available from Electomate

featuring:

  • 2 rows of re-circulating balls
  • Equal loading in all directions
  • Dust proof design
  • SS bearing, rail, and balls
  • Self-lube reservoir standard

ARC Series –Standard Profile Rail Linear Guides

Lintech MR Series Profile Rails available from Electomate

featuring:

  • Application Rail
  • 4 rows of re-circulating balls
  • Equal loading in all directions
  • Dust proof design
  • Alloy steel bearing, rail, and balls
  • Self-lube reservoir optional

HRC Series– Heavy Profile Rail Linear Guides

Lintech MR Series Profile Rails available from Electomate

 

featuring:

  • Heavy Load Rail
  • 4 rows of re-circulating balls
  • Equal loading in all directions
  • Dust proof design
  • Alloy steel bearing, rail, and balls
  • Self-lube reservoir optional

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

Motion Control - Electromate-Logo
Visit our Website
Motion Control - Electromate Twitter Link
Motion Control - Electromate Facebook Link

Motion Control – Choose the Right, High Precision, Low Cost Linear Stage to Suit Your Motion Control Application!

OES AQ120 and AQ130 Motorized Linear Stages

 

OES Logo

Van Nuys, CA – — Motion Control Components – OES (Optimal Engineering Systems) offers ten high precision, low cost linear positioning stages that can be easily integrated into new and existing applications. Choosing the best slide for the application is easy. The five AQ120 and five AQ130 series of linear motorized stages are available in travel distances of: 50 mm (1.969 in.), 100 mm (3.937 in.), 150 mm (5.906 in.), 200 mm (7.874 in.), and 300 mm (11.811 in.). The compact, AQ120 series of linear stages features high precision steel linear ball bearings and hardened steel shafting and are designed for loads of 15 kg (33.1 lbs) for the AQ120-50 to 5 kg (11 lbs) for the AQ120-300. The AQ130 series of linear stages features high precision open steel linear ball bearings and supported hardened steel shafting and is designed for loads to 30 kg (66.1 lbs) for all travel lengths.

Each of these black anodized slides features a large table with a pattern of threaded mounting holes, and a precision low backlash (2µ) 4 mm per turn lead screw. The resolution for all slides is 2 microns per pulse using a10 microsteps per step motor driver, or just 1 micron per pulse using a 20 microsteps per step motor driver.

These stages can easily be configured as XY stages, with a Z axis, or with a rotary, lift, or goniometer stage. All stages are also available with a servo motor and optical encoder, and are compatible with OES’ line of motion controllers. Options also include: plug-in motor driver / indexer, stepper motor with an optical encoder for position verification.

Additionally all stages are available as complete plug-and-play systems.

See also: http://oesincorp.com/motorized-linear-stages/low-cost-series/index.htm

For complete specifications contact an OES engineer or go the OES website at: http://oesincorp.com/motorized-linear-stages/low-cost-series/index.htm.

About OES Optimal Engineering Systems, Inc. (OES) is a manufacturer of motion control products including: Stepper motor controllers and drivers, solenoid electronics, and positioning stages and slides. Applications include: Animation, automated assembly systems, automation, CNC machines, flight simulation, inspection systems, linear and rotary stages, machine tools, medical devices, motion control camera boom systems, optical comparators, CMMs, pan-tilt gimbals, PCB assembly & inspection, pick-and-place, positioning stages, robotics, scanners, security cameras, telescope drive mechanisms, time-lapse photography and winders

Some of the industries OES serves are: Aerospace, Astronomy, Chemical, Communications, Educational Institutes, University, Colleges, Government Agencies, National Labs, Manufacturing, Medical, Metrology, Military, Motion Control, Museum, News Agencies, Semiconductor and Test Equipment. Optimal Engineering Systems, Inc’s. competitive advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.ve advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.

For additional information contact Customer Service at Optimal Engineering Systems, Inc. (OES) , 6901 Woodley Ave, Van Nuys, CA 91406; Tel: 888-7071-1826, +1 (818) 222-9200, E-Mail: sales@oesincorp.com or visit the website at http://www.oesincorp.com

OES Logo
Visit OES Website
OES Facebook
OES Twitter
OES Videos

Motion Control – Wide, Linear Motion Systems Resist – Roll, Pitch, Yaw!

Linear Motion Control - SAIBO Wide Profile Linear Motion Control System!

LM76

Longmeadow, MA – Linear Motion Control –The low cost, wide, stable platforms of the SAIBO SB-LGC Linear Motion Systems are available exclusively from LM76 in two sizes to meet load requirements up to 6000 N. (1349 lbs).  These wide, low profile linear motion systems feature: Low noise, smooth travel, high speed to 10 m/s (120 ft/s), high acceleration to 50 m/s (150 ft/s), low weight, high linear accuracy, sealed radial low friction bearings, low cost, and because of their wide profile they have high moment (Roll, Pitch, and Yaw) load capacities. Additionally they are easy to install, in any orientation, into new and existing applications.  SB-LGC maintenance free linear motion systems have sealed for life rollers, RC60 hardened shafts, and are available in lengths to 6000 mm (263 in.)

SAIBO SB-LGC Linear Motion Platform and Rail System have an adjustable preload system to control the required level of precision needed for most applications. Capable of loads to 6000 N (1349 lbs), the very stable LGC platforms have four drilled and tapped holes for mounting tooling, cameras, test equipment, etc.  For use in: Robotics, assembly, photography, pick-and-place, sorting, packaging, manufacturing, sampling, laser cutting, wafer handling, and other precision applications.

LM76, the exclusive US distributor of SAIBO linear motion components, manufacturers a broad variety of FDA & USDA compliant bearings and shafting, in inch sizes of .25 inches to 1.5 inches, and a FDA & USDA compliant profile rail and slide system that can easily be integrated into new and existing applications.  The bearing options include: Self-lubricating FDA & USDA compliant Teflon® composite bearings in a 304 stainless steel shell, and lower cost bearings with a ceramic coated shell and FDA & USDA compliant liner.  Bearings are available in closed and open configurations, and are drop-in replacements for all inch sized linear ball bearings.

About LM76

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail:mquinn@lm76.com or visit the website at http://www.lm76.com

LM76
Visit our Website
Order Our Catalog

Motion Control – Simple, Super Low Friction Linear Motion Conveyance System

Transporter 2 Roller Block and Rail system from LM76
lm76-transporter2-block-and-rail-system-01

LM76-Pat-Logo-3

 

 

 

 

 

 

 

 

 
lm76-transporter2-block-and-rail-system-02

The Transporter 2 Roller Block and Rail system from LM76 is just that…practical. A black anodized aluminum carriage plate which features 4 plastic wheels pressed over ABEC 1 roller bearings. Transporter’s rail features a ceramic coated aluminum extrusion which offers a hard, extremely durable running surface. Transporter 2 offers 2 carriage plate designs: Option 1 is a standard block with 4) 10-32 mounting holes. Option 2 is a longer and more narrow block with 4) 10-32 mounting holes and a hand lock assembly. This low friction, maintenance free system is superb for sliding doors, manual assembly lines, camera motion and any other applications where low friction motion is required. Transporter is not for high loads or moment loading or for applications which require high speed, critical accuracy or wash down.

 

Load Data

Max  ZO Max YO
15 Lbs. 15 Lbs.
Max Speed 10″ Per Second
  • Machine Tool Sliding Doors

  • Postal Equipment Linear Transporters

  • Monitor Stands

  • Hand/Manual Assembly
    Lines

  • Lab Equipment

  • Syringe Docking/Filling
    Systems

  • Cable&Hose Management System Guidance Trolleys
    (i.e. igus/A&A Gore-Tite)

  • Aerial Pneumatic Tool
    Festoon Followers

  • Table Top Conveyance –
    Arts and Crafts

  • Positioning for Measurement
    Components

  • Cable Reel Followers

  • Furniture Sliders

  • Closet Door Sliders

  • Small Appliance Sliders

  • Rack Shelf Sliders

  • Pulley Dancers

  • Moveable Armrest Sliders for Wheelchairs

  • Small Camera Slider

  • Wall Sliders for Monitors
    and Flat Panel Displays


Carriage Block P/N
 
TPS
( Standard Block)
TPL
Long and Narrow Block with
Hand

 

TPS Standard Block

TPL Long Block

Dimensions



A
±.010
B
±.010
C
±010
D E
1.000 0.620 0.125 0.940 0.500
F Standard Rail Lengths H
Screw Inch
H1 H2 H3
1.500 7,13,19,25,31 # 10 .375 .220 .206
NOTE: Rails are available up to 10 feet long. We will cut special lengths and provide special hole locations if provided a print.
Please call Christine
Carlson 1-800-513-3163
for further information
or email sales@LM76.com

Rail P/N
Length

LR3

?

Part Number Example: LR3-36

1 LR3 Rail – 36″ Long

 

About LM76

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

For all of the LM76 Catalogs go to:

http://lm76.com/PDF%20Catalogs.htm

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail:mquinn@lm76.com or visit the website at http://www.lm76.com

LM76
Visit our Website
Powered by WordPress and ThemeMag