Category Archives: Linear Motion Stages

Motion Control – Dual Axis Cross Roller Bearing Voice Coil Stage Features 200 Nanometers Positioning Repeatability!

Motion Control – Stage Features 200 Nanometers Repeatability!

motion cotrol - miniature xy stage
motion control - miniature components

Forestville, CA, – — The motion control – VCS-XY1010 Dual Axis Voice Coil Stage: Cross roller bearing guidance system; Reaction force cancellation system; 10mm of linear motion each axis; 35 G’s acceleration, no load; 200 nanometers positioning repeatability; Non-contact electro-optic position sensor; Direct SCA814 Servo Controlled Amplifier compatibility; 38 x 251 x 254mm, 1120 grams.

Motion Control – Direct Drive Linear Motors with Integrated Encoders

Motion Control – Electric Cylinder

motion control - SDLM -Electric Cylinder

motion control - moticont

 

Van Nuys, CA – Motion control – New, patent-pending, SDLM-051 direct drive linear motors with built-in encoder from Moticont eliminate backlash and provide users with high acceleration, high speed, high resolution, and long life. Available in several off-the-shelf models, these direct drive linear motors feature resolutions of 5.2 µm (0.000206 in.), 1.25 µm (0.000049 in), and sub micron resolution. Compact, only 2 in. (50.8 mm) in diameter and 3.75 in (95.3 mm) long, and with the linear optical quadrature encoder inside directly connected to the shaft for the great-est possible accuracy, these motors can be easily integrated into new and existing applications using threaded features on the front and rear faces of the motor, as well as each end of the shaft.

Motion Control Products – High Precision Linear Focus Actuator from Equipment Solutions Features 200 Nanometer Positioning Repeatability!

Motion Control Products – Linear Focus Actuator

motion control - linear focus actuator


motion control - miniature components

 

 

 

Forestville, CA, – Motion Control Products  — The LFA-2014 Linear Focus Actuator has a 20 millimeter clear aperture, 14 millimeters of linear motion, 200 nanometer positioning repeatability, non-contact electro-optic analog position sensor, fully integrated SCA814 Servo Amplifier, integrated heat sink, motor coil temperature sensor, and integrated stage motion brake.

Motion Control – Linear Voice Coil Motor Sets A New Standard for Miniature!

Motion Control – Miniature Linear Voice Coil Motor!

motion control - moticont voice coil otor
Van Nuys, CA -Motion control – Moticont Introduces their smallest linear voice coil motor! The LVCM-010-013-01 Linear Voice Coil motor is only 0.375 in. (9.5 mm) in diameter and the length at mid-stroke is just 0.81 in. (20.7 mm) long. However, this new miniature voice coil motor has a high force-to-size ratio with a continuous force of 1.0 oz (0.28 N), a peak force of 3.2 oz (0.88 N), and a 0.25 in. (6.4 mm) stroke

motion control - moticont

 

A clean brushless DC linear servo motor which has high acceleration/deceleration and low inertia, the LVCM-010-013-01, is highly efficient, and ideal for: Haptic feed back in medical/surgical instruments, vibration damping, work holding and clamping, laser machining and drilling, assembly, sorting, packaging, sampling, scanning, laser beam steering and filtering, wafer handling, and pharmaceutical applications.

Motion Control – The Engineering Edge – Application – Trunnion Grinding Slide for Oil Field

Motion Control – Custom Linear Slides

Motion Control Application – We are shipping another slide today for the oil patch. When Weir Oil and Gas called with a slide application that required special engineering, LM76 was all ears – as it was right up our alley.

Motion Control – Miniature Linear Focus Actuator Features <50 Nanometer Positioning Resolution!

Motion Components – Miniature Linear Focus Actuator

motion control - linear focus actuator

Motion Components – LFA-1007 Linear Focus Actuator: 10mm clear aperture, 7mm range of motion, <50 nanometer positioning resolution, 50 grams moving mass, 70 x 70 x 50 (600g)

 

motion control - miniature components

 

 

Forestville, CA — Motion Components – Linear Focus Actuator – The LFA-1007 is a high performance compact positioning actuator. It was specifically developed for applications requiring both high precision and high-speed positioning over a short to medium stroke. This product mates the voice coil motor to a perfectly smooth flexure guidance system and a very high resolution position feedback encoder.

Motion Control – Low Cost, High Precision 3 Axes Linear Voice Coil Actuator!

Motion Control – XYZ Axis Voice Coil Actuator

motion control - 3 axis voice coil stage

Van Nuys, CA – Moticont has released a new three axis XYZ linear actuator the XYZ-10. The X and Y axes of the actuator each has a 0.97 in. (24.6 mm) of travel and the Z axis has a stroke of 0.500 in. (12.7 mm).
motion control - moticint

 

The high speed, high acceleration, zero cogging, brushless voice coil motors provides 6.3 lbs (28.2 N) of force and peak forces of 20.0 lbs (89.9 N) at a 10% duty cycle for the X and Y axes. The Z axis linear actuator has a continuous force of 21.2 oz (5.9 N) and 67.0 oz (18.6 N) peak force.

Motion Control – Customizable Lintech 100 Series Screw Driven Linear Stages That Ship In 1 Week Are Available from Electromate!

Motion Control – Custom Linear Stages

Lintech’s 100 Series Positioning Tables set the standard for high performance and value. 
motion control linear stages
 

 

 

 

 


Vaughan, Ontario, Canada — Motion Control Components –

Acme Screw or Ball Screw Driven Linear Motion:

The Lintech 100 series linear positioning slides are designed to maximize performance while minimizing physical size and cost.
motion control electromate robotics
These linear slides use a low friction, preloaded, recirculating linear ball bearing system, which ride on precision ground linear square rail guide.

Motion Control – Linear Stage Features Sub-micron Positioning, 10 mm Clear Aperture, and High Accelation!

Motion Control – Miniature Stage

motion control - miniature stage

 


Forestville, CA – Motion Control – Equipment Solutions’ Series of VCS-10 Voice Coil Stages feature: Sub-micron positioning, high acceleration, digital and/or analog position sensors, and are available with a 10 mm clear aperture! These high acceleration stages (50 G’s no load), have 10 mm of linear motion and < 3 millisecond step response time. The customizable VCS-10 Series of linear position stages are ideal for high speed, high precision optical and laser focusing applications in: Medical, semiconductor inspection and manufacturing, scanning microscopy, and micro machining/manufacturing.

motion control - equipment solutionsThe VCS-1010D motion control linear position stage (pictured) features a 10 mm clear aperture and a 1 μm resolution digital position sensor, with differential quadrature outputs and a center index pulse. The highly responsive, frictionless voice coil motor has been optimized to keep the moving mass as low as possible for the fastest response times, and it has the lowest electrical noise of any motor type.

motion control - miniature stage with lens

These compact 76 X 41 X 38 millimeter motion control stages weigh only 255 grams and can be operated horizontally or vertically. Multiple sets of mounting holes allow for easy integration into new or existing applications. These versatile VCS-10 linear positioning stages can be custom configured to meet the users requirements. As an example, is the custom VCS-1010D (pictured right) with a 6mm lens and manual cross-axis adjustments.

Equipment Solutions is a leading authority in the field of voice coil motion control. Recognizing that exceptional performance can only be achieved through a system level approach, ESI also has extensive servo electronics expertise. Equipment Solutions motors and actuators are used in markets ranging from applications where our actuators delicately guide a laser beam over an eye as part of a vision enhancement procedure to military hardware that is battlefield certified, and everything in between.

motion control - miniature stage specifications

motion control - stage drawings

With a time-to-market as short as four weeks, Equipment Solutions has maintained innovative, high quality products. Equipment Solutions, never loses sight of the value of listening very carefully to client input, nurturing a cooperative working relationship, understanding the big picture but never losing sight of the small details that describe it, and perhaps most importantly, following through with after delivery support.

For additional information contact Jeff Knirck at Equipment Solutions,Inc. Mailing Address – PO Box 159, Forestville, CA 95436; Shipping Address 6490 Front Street, Forestville, CA 95436; Tel: 408-245-7162, Fax: 408-245-7160, E-Mail: info@equipsolutions.com or visit the Website at http://www.equipsolutions.com


See this and other Motion Control Components from Equipment Solutions featured on:

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://Gotcha-Stick.com

http://MotionControlMarketing.com

Go to Equipment Solutions Blog

Go to Facebook

Go to Twitter

motion control - equipment solutions

 

Motion Control – The Engineering Edge – Lowest Coefficient of Friction Linear Bearings


low coefficient of friction linear bearings

Motion Control – Pegasus Linear Bearings – For the Time A Linear Bearing Simply Cannot Fail!

Motion Control – Hybrid Ceramic Ball Linear Bearings

For those times when a Linear Bearing “CANNOT” Fail!

motion control - linear bearings


motion control - linear motion products

 

 

E. Longmeadow, MA –Motion Control – LM76 has developed the most corrosion resistant linear bearing available. In space, deep under the sea, or in the harshest environments, when there can be no “Plan B,” Pegasus Series 1 Linear Ball Bearings can be counted on to perform. In some applications linear bearings will not move for days, weeks, months or even years, however, when called on to perform they must work as if they just came out of the box. LM76’s Pegasus Series 1 Linear Bearings feature Silicon Nitride (SiNi) Ceramic Balls in a shell with retainer and end caps all made from 440 Stainless Steel and then ArmorloyTM coated.

Motion Control – High Precision, XAB Triple-Axis (2 Goniometers and X-Axis) Stage Available from OES!

Motion Control –  Triple-Axis Stage!

motion control - tri-axis stages


motion control - stages - custom

 

 

 

Van Nuys, CA – — Motion Control – Optimal Engineering Systems, Inc. (OES) offers a very low cost solution for the precise measurement of compound angles or the rotation of an object to precise angular positions.

The XAB-050-XX-01 integrates a two-axis Alpha-Beta goniometer on top of a single-axis linear actuator. The Beta-axis has a travel range of +/- 15 degrees with a rotation height of 50 +/- 0.2 mm.

Motion Control – Linear Focus Actuator Features, 20 mm Clear Optical Path, <50 nanometer Repeatability, and <3 miliseconds Response Time!

Motion Control – Linear Focus Actuator

Forestville, CA –The LFA-2010 Linear Focus Actuator from Equipment Solutions is a high performance compact motion control positioner, specifically developed for optical applications requiring both high precision and high speed positioning over a short to medium stroke.

motion control - miniature components

The LFA-2010 actuator has a 10 mm range of motion with <50 nanometer positioning repeatability, and a small step response of time of <3 milliseconds.

Motion Control – One Piece ETX Linear Bearing/Pillow Blocks Can Be Used In Radioactive Environments!

Motion Control- ETX Linear Bearing/Pillow Blocks

Motion Control Bearing/Pillow Block for Radioactive Environments

E. Longmeadow, MA Motion — Control Components – Linear Motion – LM76 now offers one piece ETX Linear Bearing/Pillow Blocks that will not degrade in a radioactive environment! Machined from a solid block of self lubricating ETX, linear bearing-blocks have high strength, excellent wear resistance, low coefficient of friction, and excellent dimensional stability at higher temperatures as there is no other materials such as PTFE seals or lubricants these bearing-blocks are maintenance free.

motion control - lm76

Custom designed for use in a nuclear power plant these linear bearing/pillow blocks travel on ceramic coated shafting (also supplied by LM76) completely submerged in radioactive water.

To see the “Motion Control Application – ETX Pillow/Block Bearings for Radioactive Environments” CLICK HERE

Motion Control – Compact Direct Drive Linear Actuator Has Integrated Encoder and Temperature Sensor for Increased Throughput!

Motion Control –  Linear Actuator features Increased Throughput!
motion control - linear actuators


motion control - moticont

 

Van Nuys, CA – Motion Control – The Compact SDLM-051-070-01-01 Direct Drive Linear Actuator with integrated position and temperature sensors is the latest addition to the patented series of zero backlash, zero cogging, high acceleration, high speed, high resolution, long life actuators from Moticont. This direct drive linear Actuator, also referred to as an Electric Cylinder is 2.000 in. (50.9 mm) in diameter and the compact housing length is just 2.750 in (69.9 mm).

Motion Control – Low Cost 1, 2, 3, and 4 ADAGIO Axis Stepper Motor Motion Control Systems Available from Optimal Engineering Systems, Inc. (OES)!

Motion Control – Stepper Motor Motion Control Systems

motion control - stepper motor controller


motion control - stages - customThe tables, depending on length of travel, measure 120 x 120 mm (4.73 in x 4.73 in.), 150 x 150 mm (5.90 in x 5.90 in.) and 160 x160 mm (6.30 in x 6.30 in.) The AQ150 Series has top and side rail covers. Featuring a 4 mm per turn, precision 2 µ backlash lead screw, typical performance specifications of the AQ140 and AQ150 linear stages include: repeatability of 5 µ, positional accuracy 8 µ, straightness 6 µ, driving parallelism 15 µ, pitching 25 arc seconds, and deflection 25 arc seconds.
Van Nuys, CA – — Motion Control – To complement the Optimal Engineering Systems’ (OES) expanding line of single and multi-axis motion control stages, OES has added the ADAGIO-X-STPR Series of Motion Control Systems.

Motion Control – Rotational Voice Coil Stage quickly and repeatably steers an optical beam with a diameter of up to 25 millimeters over 90° with 25 microradians of resolution!

Motion Control – Rotational Voice Coil Stage

Quickly and repeatably steer an optical beam with a diameter of up to 25 millimeters over 90° with 25 microradians of resolution!

RVC-9025 Rotational Voice Coil Stage: Up to 25mm wide mirror; Controllable positioning over +/-45 degree optical; 5 arcsec (25 microradians) optical position repeatability; 1 degree optical step-and-settle in less than 5ms; Fully integrated servo controller; USB 2.0 and auxilary user electrical interfaces; X 58 x 28 x 21 millimeters, 30 grams

motion control - miniature stages

Forestville, CA – The RVC-9025 Rotational Voice Coil Stage provides a means to quickly and accurately set an angular position. The frequency is factory adjusted to customer specifications during the manufacturing process. Amplitude of the resonating mirror can be adjusted through either an analog input voltage or the USB interface.

motion control - miniature components

An optional high-resolution position feedback sensor can be monitored by an analog output signal on the User Connector. The RS-25 Resonant Scanner can also be configured with a high-resolution 16-bit Analog to Digital Converter to quickly sample and report the mirror position at any moment if the position sensor is included.

Motion Control – Application – In “Off-Roading” LM76’s Black Racer Bearing is a Winner!

Motion Control – Application – Ceramic Linear Bearings

motion control - linear bearings

Motion Control – Anyone who’s worked on cars knows how critically important ball joints are to steering and suspension. They also know what happens when ball joints fail!

motion control - lm76 products

E. Longmeadow, MA – — Motion Control – Application Story – When an aftermarket manufacturer of off-road steering and suspension systems needed an upper ball joint bearing, they called LM76. These systems are purchased by off-road vehicle owners who want to upgrade their OEM steering and suspension units for hard-hitting environments. Pounding, shock, sand and debris are all part of the mix when it comes to extreme off-roading and LM76 Black Racer bearings are right at home. According to company engineers, after a year of brutal testing, Black Racer met all design goals and exceeded expectations.

Motion Control -What To Consider When Specifying A Linear Slide

Motion Control – Tutorial

Considerations when specifying a linear slide for a new or existing application.

By Mike Quinn • LM76

When a design engineer has fully defined a linear-motion application’s requirements regarding travel length, speed, force, and accuracy as well as repeatability, the next question to answer is this:

Does an off-the-shelf linear slide (or a stock linear slide from a catalog) fully satisfy the application?

motion control - lm76

Off-the-shelf linear slides are advantageous for their quick delivery and lower cost than that of custom components. No wonder most linear-motion designs do in fact employ off-the-shelf linear slides from various component and system suppliers.

motion control - linear stage

Motion Control – Low Cost, Long Range of Travel, High Precision, Low Profile, Motorized, Profile Rail Linear Guide Stages Are Available from OES

Motion Control – Profile Rail Stages

motion control - linear stages


motion control -oesVan Nuys, CA – — Motion Control – Optimal Engineering Systems, Inc. (OES) has added five new profile single axis positioning stages to their AQ150 Series of linear stages. Available off-the-shelf in travel lengths of: 600 mm (23.622 in.), 700 mm (27.559 in.), 800 mm (31.496 in.), 900 mm (35.433 in.), and 1000 mm ( 39.370 in.), these stages are available with either a Two-Phase Stepper Motor or with a Three-Phase Brushless Motor with a Quadrature Incremental Optical Encoder.

Powered by WordPress and ThemeMag