Category Archives: Driver – Stepper Motor

Motion Control – Electromate Recognized with 2021 AHTD Foundation Award!

Motion Control – Electromate 2021 AHTD Foundation Award!

motion control - electromate components


motion control - electromateToronto, Ontario – June 18, 2021 – Electromate received a Foundation Award from the Association for High Technology Distribution (AHTD), recognizing the company’s 25 years of membership and support. This is the first year the Award has been given, honoring a small group of members out of approximately 300 automation solution providers and manufacturers.

The AHTD is dedicated to maximizing the productivity, growth, and enterprise opportunities of its high-tech automation solution provider and manufacturer members. These goals align with Electromate’s commitment to driving innovation, identifying emerging technologies and products, promoting the education of automation and motion control, and fostering its relationships with industry peers.

Motion Control – Integrated Single and Multi-Axis Stepper Motor Controller and Driver Available from Optimal Engineering Systems, Inc. (OES)!

Motion Control – Integrated Stepper Motor Controller and Driver

motioncontrol - controller -stepper

 

 

 

 

 

 

 

 

motion control - stage
Van Nuys, CA – — Motion Control – Optimal Engineering Systems, Inc. (OES) has introduced their new ICAD Series of integrated motion controllers and drivers for 2-phase stepper motors. Available as 1, 2, 3, and 4 axes modules (pictured) they are ideal for NEMA 8 to NEMA 42 stepper motors. These compact 6.000 in. x 8.000 in. plug-and-play, integrated controllers incorporate high resolution micro-stepping drivers for precise positioning.

Motion Control – COVID-19 … Important Information for Ventilator Manufacturers!

Motion Control – ATTENTION – Ventilator Manufacturers!

motion control - ventilator components

 

motion control - electromate logo

 

 

Vaughan, Ontario, Canada — Motion Control Components — COVID-19 has caused a significant shortage of ventilators for the most seriously ill patients. We are facing a global shortage of equipment and have precious little time to respond.

Electromate is a mechanical ventilator component supplier and works with a number of manufacturing partners that supply crucial components needed to build more ventilators.

These include:

  • HMI’s
  • Linear guides
  • Linear actuators
  • Screw assemblies
  • Compact gearboxes
  • High efficiency servo & stepper motors
  • Programmable motion controllers and drives

Our team of motion design experts are located all across Canada and are available right now to help you with any electro-mechanical ventilator design. If you are working on a ventilator involving rotary, linear, or any other motion, we will provide immediate help with electro-mechanical engineering and component sourcing. Contact us today.

We are already working with ventilator and respirator companies and encourage any other businesses working on COVID-19 solutions to reach out to us.

All inquiries regarding ventilator components or any other equipment to help battle COVID-19 are given utmost priority. We can help to optimize your design quickly and provide fast turnaround proposals as requested. Additionally, we are able to meet high production demands in a very short time by utlilizing ‘Medical Fast Track Programs’ -info.us@maxongroup.com from maxon, and other vendors.

Many of the products we sell to the medical technology sector have ISO 13485 certification. This certification confirms that these products adhere to the fundamental requirements of medical technology and that all processes and procedures are documented, thereby guaranteeing traceability.

In addition to helping with the design and acquisition of critical components used in ventilators and respirators, we also want to make you aware of initiatives that you may be able to utilize. Please read below to learn more about these programs and how you can assist with the COVID-19 cause.

CODE LIFE VENTILATOR CHALLANGE

The Montreal General Hospital Foundation, in collaboration with the Research Institute of the McGill University Health Centre (RI-MUHC), is launching a global innovation challenge, backed by a prize of $200,000 CAD. They are calling for teams to design a simple, low-cost, easy-to-manufacture and easy-to-maintain ventilator which could be deployed anywhere needed to save lives.

motion control - ventilator components

To learn more, please visit https://www.mghfoundation.com/en/news/code-life-ventilator-challenge/

 

 

MIT EMERGENCY VENTILATOR (E-VENT) PROJECT COPY

MIT has launched an emergency research project with a team of Engineers and American clinicians to address the question:

Is it possible to safely ventilate a COVID-19 patient by automatically actuating a manual resuscitator?

Their process in approaching this question is to first identify the minimum requirements for a low-cost ventilator, based on the collective wisdom of many clinicians, design against these requirements, conduct immediate testing, report the results, iterate and facilitate discussion.

motion control - medical components

To learn more, please visit https://e-vent.mit.edu/

 

 

About Electromate:

Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

More on Electromate can be found at

Website: http://www.electromate.com

LinkedIn: https://www.linkedin.com/company-beta/209277/

Twitter: https://twitter.com/Electromate

Facebook: https://www.facebook.com/electromateindustrial/

Blog: https://electromate.wordpress.com/

motion control - electromate

For more information on the “Best Place to Work”CLICK HERE!

To view Electromate’s new corporate video CLICK HERE

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com


See this and other Motion Control Components from Electromate featured on:

http://MotionShop.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://MotionControlMarketing.com

http://Gotcha-Stick.com

motion control - electromate

Motion Control Digital Servo Amplifiers for Embedded Applications!

Motion Control – Digital Servo Amplifiers

motion control digital servo amplifier

Motion Control Servo2Go-Logo

Motion Control Components – Servo2Go.com announces the release of the DZRALTE Series of High Performance Digital Servo Drives from Advanced Motion Controls of Camarillo, CA, which are engineered to conquer the most demanding industrial applications!

The DZRALTE Series are motion control digital servo drives that control brushed & brushless servomotors in a compact form factor which make them ideal for embedded applications. These fully digital drives operate in torque, velocity, or position mode and employ Space Vector Modulation (SVM) which results in higher bus voltage utilization and reduced heat dissipation compared to traditional PWM drives. The command source can be generated internally or can be supplied externally. In addition to motor control, these drives feature dedicated and programmable digital and analog inputs and outputs to enhance interfacing with external controllers and devices.

The DZRALTE Series feature a RS-232 interface for drive configuration and setup as well as a RS-485 interface for drive networking. All drive and motor parameters are stored in non-volatile memory. Drive commissioning is accomplished using AMC’s powerful & user friendly free DriveWare software.

The combination of a DigiFlex® Performance™ DZRALTE servo drive with its DriveWare software establishes a new benchmark in versatility!

Motion Control Capabilities built into the DZRALTE servo drives include:

  • Size Ranges: 10-175 VDC @ 6A to 30A continuous (60A peak) Output
  • Full tuning control of all three servo loops: Position, Velocity and Torque!
  • Real-time oscilloscope with up to 8 channels to ensure that tuning achieves the highest performance
  • Status window with over 50 simultaneous channels for drive and system diagnostics
  • I/O configuration configurable to latch/non-latch as well as active-high & active-low
  • Universal servo motor compatibility by means of automatic commutation adjustment
  • Dual Loop Feedback – Increases both stability and accuracy

Additional information on the DZRALTE Series Servo Amplifiers can be found at: https://www.servo2go.com/catalogsearch/result/?q=DZRALTE

These and other Motion Control Products are available through www.Servo2Go.com

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-0240 or e-mail Warren Osak atwarren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

See this and other Motion Control Components from Servo2Go featured on:
http://MotionShop.com
http://AllMotionBlogger.com
http://Automation-Blogger.com
http://MotionControlBlogger.com
http://motioncontrolBuyersGuide.com
http://MotionControlWeb.com
http://MotionShop.net
Servo2Go-Logo
Visit our Website
Twitter Link
Facebook Link

Motion Control – Powerful Microstepping Drive from Servo2Go!

Applied Motion’s powerful stepper drive costs the same as a competitors drive without a built-in power supply!

Servo2Go-Logo

Greenville, DE –— The Motion Control STAC5 microstepping drive provides up to 5 amps per phase from a high bus voltage with sophisticated current control, delivering high torque over a board range of speeds. An advanced anti-resonance algorithm with electronic damping allows for maximum torque utilization and fast settling times.

The STAC5 microstepping drive is available in 120VAC and 220VAC versions, both housed in a compact package.

Applied Motion’s powerful stepper drive costs the same as a competitors drive without a built-in power supply, and features……

  • High performance
  • Built-in power supply & regeneration clamp
  • 120 and 220 VAC models
  • Accepts pulse & direction, streaming commands, stored programming
  • 10/100 MBit Ethernet & EtherNet/IP
  • Advanced anti-resonance
  • Matching high performance motors

All Motion Control STAC5 models include 100Mbit Ethernet communication. The Ethernet interface is used to configure the STAC5 and motor, and also supports the SCL and Q languages over standard Ethernet cabling, addressing and protocols.There are 3 control options available with the STAC5 stepper drives: S, Q and IP.

T• “S” drives can operate in pulse & direction, velocity, and streaming serial (SCL) control modes. To select the control mode, as well as to setup the motor and configure other drive parameters, use the ST Configurator™ software.

• “Q” drives can operate in all of the same control modes as an S drive, plus they have the ability to run stand-alone Q programs stored in non-volatile memory. Q programs are created using the Q Programmer™ software, which provides multi-tasking, math functions, conditional processing, data register manipulation, and more features in a robust yet simple text-based programming language. Like S drives, Q drives must first be setup and configured using the ST Configurator™ software.

• “IP” drives come with built-in EtherNet/IP network communications, the widely used industrial protocol for manufacturing automation applications. With EtherNet/IP users can control, configure and query the drive using an open, standards-based, industrial Ethernet connection at speeds up to 100 MBits/sec. The STAC5-IP drives run all of the same control modes as STAC5-Q drives, with the addition that all drive features can be accessed over EtherNet/IP, including more than 100 commands and 130 registers for controlling motion, I/O, configuration, polling, math, register manipulation, and Q programming. STAC5-IP drives are setup and configured using ST Configurator™, and Q programs are created using Q Programmer™.

An encoder feedback option provides position verification, stall detection and/or stall prevention. Applied Motion’s proprietary stall prevention algorithm monitors rotor lag and automatically reduces speed or acceleration to avoid motor stalls, allowing 100% torque utilization. high torque. These are three-phase brushless motors with hall signals for commutation and velocity loop feedback.

The STAC5 can be purchased with a wide range of high torque step motors, optimized for use with the drive. Three lengths of HT23 are available in single and double shaft configurations: HT23-552, HT23-553 and HT23-554, with holding torque ranging from 84 to 255 ounce-inches. Three lengths of HT34 are also available in single and double shaft configurations: HT34-495, HT34-496 and HT34-497, with holding torque ranging from 550 to 1700 ounce-inches.

For more information on the STAC5 Stepper Drives from Applied Motion Products, click on the link below —

https://www.servo2go.com/product.php?ID=105241&cat

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-02401- 877-378-0240 or e-mail Warren Osak at warren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

Servo2Go-Logo
Twitter Link
Facebook Link

Motion Control – AMC’s STAC6-Q-H – Advanced Step Motor Drive for Hazardous Locations

motion control - Electromate offers AMC-STAC6-Q-H-Stepper Drive

Motion Control - Electromate-Logo

 

Motion Control – The Only Internationally Certified Hazardous Location Stepper Drive Available

 

Vaughan, Ontario, Canada — Motion Control Components – The STAC6 offers best-in-class anti-resonance that ensures optimal performance of the step motor over the widest speed range. The drive is powered by single-phase 120 VAC which generates a nominal 160 volt DC internal bus voltage capable of driving the highest torque NEMA 34 and 42 frame step motors on the market.

Features include:

  • ATEX and IECEx certified for Class I, Zone 2 locations
  • UL certified for Class 1, Div 2, Group C & D locations
  • HazLoc Step Motor Drive
  • HazLoc certified for USA, Canada, Europe and Middle East
  • Advanced anti-resonance algorithm
  • Torque ripple smoothing
  • Microstepping to 51,200 steps/rev
  • Encoder feedback option for enhanced system accuracy using Stall Detection and Stall Prevention
  • Designed for use with high quality NEMA 23, 24, 34 and 42 frame step motors
  • 7 digital inputs, 3 digital outputs, all optically isolated
  • 2 analog inputs, +/-10 volt range
  • Supply Voltage: 94-135 VAC, 50/60 Hz, single-phase
  • Input Power: 120 Vac, 1 Phase, 1.67 A (rms)
  • Output Power: 120 Vdc, 1 phase, 4.24 A (rms), Continuous Duty Rating
  • Control Modes: Streaming Commands, Analog Positioning, Encoder Following, Q Programming
  • Output Current: 0.5-6.0 A/phase, peak-of-sine
  • Communication Ports: RS-232, RS-485
  • Idle Current Reduction: 0-100%
  • Setup Method: Software setup
  • Dimensions: 6.35 x 4.66 x 2.31 inches
  • Weight: 32 oz.
  • Ambient Temperature Range: -40 to +55 °C (-40 to +131 °F)
  • Ambient Humidity: 90% max, non-condensing

CLICK HERE to view more information on the STAC6-Q-H Advanced Step Motor Drive for Hazardous Locations from Applied Motion Products.

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

 

Motion Control - Electromate-Logo
Visit our Website
Motion Control - Electromate Twitter Link
Motion Control - Electromate Facebook Link

Motion Control – Electric drives … … invisible helpers in our everyday lives!

driven magazine reveals where they are commonly used.

Precision drive systems can be found in the home, in vehicles, and at work, making our lives simpler and safer. The current issue of driven, the maxon motor magazine, provides interesting insights into the world of drive technology. It also goes in search of an old friend.

Maxon motion control Online Magazine Driven

Maxon Logo

Fall River, MA — Motion Control Components- Online Magazine – Most people have nothing to do with drive systems in their work. However, without being aware of it, they come across them everywhere: in cars, buses, elevators, and even within their own four walls. Drive systems are invisible to ordinary people, but they play an important role in our lives. driven, the maxon motor magazine, spends a day with a family and discovers some exciting uses for them.

What’s Roboy doing these days?

driven readers can find out what the popular robot known as Roboy has been doing over the last few years and what the future holds for him. We also take a look at the hot topic of women in technical careers. Two female engineers from maxon describe their experiences in a male-dominated world and give young women some useful tips.

driven focuses on drive technology and is published twice per year in three languages. The print version is available free of charge at magazine.maxonmotor.com.

All issues are also available on the driven app, which can be downloaded from the App Store and Google Play Store.

Maxon Motion Control Apple App

 

 

 

Maxon Motion Control Android App

 

 

 

Comprehensive documentation and software are included with every delivery, and are also available for you to download from our website at www.maxonmotor.com.

Maxon Logo
Visit our Website
Order Our Catalog

Motion Control Components – Multi-axes Systems from Intellidrives!

INTELLIGENT ACTUATORS are highly programmable, integrated actuators with a motor, encoder, amplifier, controller, USB communication, and IOs.

Intellidrives Motion Control Component - Rotary Table

Motion Control Components - Intellidrives-Logo

 

Philadelphia, PA, — Motion Control Components and Systems – These stages come fully pre-configured and enable true out-of-the box controls. They are perfect for the confines and requirements of the laboratory and are also applicable for use in manufacturing environments. Rotary stages incorporate precision worm-gear drive mechanism and bearing components for accurate positioning performance over the lifetime of the product. Linear actuators are fitted with ball screws and linear ball bearings for accuracy and repeatability in precision applications.

Intellidrives Motion Control Component - Rotary Table

 

INTELLIGENT ACTUATORS are member of the Compact Positioning Stages family of linear, rotary, XY and vertical lift stages. Two or more stages can easily be mounted together in numerous combinations using adapter plates and brackets.

INTELLIGENT ACTUATORS can easily “talk over” USB 2.0, Ethenet, RS232, RS485 interfaces and come with powerful yet easy to use software packages. for system start-up and integration, like communication drivers, linkable DLL libraries, National Instruments Labview drivers and VI examples, GUI and easy-to-use DXF conversion software.

Intellidrives Motion Control Component - Rotary Table

 

Intellidrives Motion Control Component - Rotary Table

Intellidrives Motion Control Component - Rotary Table

 

About IntelLiDrives

IntelLiDrives, Inc. manufactures linear actuators, XY tables and rotary tables for the industry, government, science and research institutions around the world. Our precision rotary actuators, XY stages and linear actuators are used in the applications in medical devices, life sciences, semiconductor and electronic assembly manufacturing, data storage, laser processing, military/aerospace, photonics, automotive and test assembly, research and development and other industries requiring high precision and throughput motion control solutions.

For further information on this new product or others in our extensive product portfolio, call 1-215-728-6804 or e-mail Intellidrives atsales@intellidrives.com.com or go Intellidrive – Contact Us at: www.intellidrives.com/contact-us

Motion Control Components - Intellidrives-Logo
Visit our Website

NEW Lower Price for Powerful Microstepping Drive from Servo2Go!

Servo2Go - Motion Control, Applied Motion STAC5 microstepping drive

Applied Motion’s powerful stepper drive costs the same as a competitors drive without a built-in power supply!

Servo2Go-Logo

Greenville, DE –— The Motion Control STAC5 microstepping drive provides up to 5 amps per phase from a high bus voltage with sophisticated current control, delivering high torque over a board range of speeds. An advanced anti-resonance algorithm with electronic damping allows for maximum torque utilization and fast settling times.

The STAC5 microstepping drive is available in 120VAC and 220VAC versions, both housed in a compact package.

Applied Motion’s powerful stepper drive costs the same as a competitors drive without a built-in power supply, and features……

  • High performance
  • Built-in power supply & regeneration clamp
  • 120 and 220 VAC models
  • Accepts pulse & direction, streaming commands, stored programming
  • 10/100 MBit Ethernet & EtherNet/IP
  • Advanced anti-resonance
  • Matching high performance motors

All Motion Control STAC5 models include 100Mbit Ethernet communication. The Ethernet interface is used to configure the STAC5 and motor, and also supports the SCL and Q languages over standard Ethernet cabling, addressing and protocols.There are 3 control options available with the STAC5 stepper drives: S, Q and IP.

T• “S” drives can operate in pulse & direction, velocity, and streaming serial (SCL) control modes. To select the control mode, as well as to setup the motor and configure other drive parameters, use the ST Configurator™ software.

• “Q” drives can operate in all of the same control modes as an S drive, plus they have the ability to run stand-alone Q programs stored in non-volatile memory. Q programs are created using the Q Programmer™ software, which provides multi-tasking, math functions, conditional processing, data register manipulation, and more features in a robust yet simple text-based programming language. Like S drives, Q drives must first be setup and configured using the ST Configurator™ software.

• “IP” drives come with built-in EtherNet/IP network communications, the widely used industrial protocol for manufacturing automation applications. With EtherNet/IP users can control, configure and query the drive using an open, standards-based, industrial Ethernet connection at speeds up to 100 MBits/sec. The STAC5-IP drives run all of the same control modes as STAC5-Q drives, with the addition that all drive features can be accessed over EtherNet/IP, including more than 100 commands and 130 registers for controlling motion, I/O, configuration, polling, math, register manipulation, and Q programming. STAC5-IP drives are setup and configured using ST Configurator™, and Q programs are created using Q Programmer™.

An encoder feedback option provides position verification, stall detection and/or stall prevention. Applied Motion’s proprietary stall prevention algorithm monitors rotor lag and automatically reduces speed or acceleration to avoid motor stalls, allowing 100% torque utilization. high torque. These are three-phase brushless motors with hall signals for commutation and velocity loop feedback.

The STAC5 can be purchased with a wide range of high torque step motors, optimized for use with the drive. Three lengths of HT23 are available in single and double shaft configurations: HT23-552, HT23-553 and HT23-554, with holding torque ranging from 84 to 255 ounce-inches. Three lengths of HT34 are also available in single and double shaft configurations: HT34-495, HT34-496 and HT34-497, with holding torque ranging from 550 to 1700 ounce-inches.

For more information on the STAC5 Stepper Drives from Applied Motion Products, click on the link below —

https://www.servo2go.com/product.php?ID=105241&cat

For further information on this new product or others in our extensive product portfolio, call 1- 877-378-02401- 877-378-0240 or e-mail Warren Osak at warren@servo2go.com or visit Servo2Go.com at: www.Servo2Go.com

Servo2Go-Logo
Twitter Link
Facebook Link
Powered by WordPress and ThemeMag