Category Archives: Controller – Miniature Mtrs

Motion Control – Latest Generation Single Axis Motion Controller from Galil

Motion Control – New Single Axis Motion Controller!

 This 1-axis motion controller features Ethernet/RS232 communication and an optional 800W Servo Drive

motion control - advanced single axis controller


motion control - electromate robotics

 

 

Vaughan, Ontario, Canada — Motion Control -The DMC-3x01x Motion Controller Series is Galil’s latest generation single-axis motion controller. It uses a 32-bit RISC processor to provide higher speed than older models.  Like all Galil controllers, programming the DMC-3x01x is simplified with two-letter, intuitive commands and a full set of software tools for servo tuning and analysis. The DMC-3x01x Motion Controller Series feature:

  • Available as a compact card-level or box-level unit
  • Connects to a stepper or servo motor amplifier of any power range
  • Can be purchased with an internal 800-Watt brushless sine drive   or microstepping drive which minimizes space, cost, and wiring
  • Operates stand-alone or can be networked to a PC via Ethernet
  • Modes of motion include point-to-point positioning, position tracking, jogging, contouring, electronic gearing and ecam.

Features include:

  • Two daisy-chainable Ethernet 100 Base-T ports. One 115kbaud RS232 port
  • Ethernet supports multiple masters and slaves. TCP/IP, UDP and Modbus TCP master protocol for communication with I/O devices
  • Encoder feedback up to 15 MHz. Quadrature standard. SSI and BiSS encoder option(SER). Sinusoidal Encoder option (DMC-31xxx). Main and auxiliary encoder inputs
  • Non-volatile memory for programs, variables, and arrays.
  • Concurrent execution of four programs.
  • Optically isolated forward and reverse limit inputs and homing inputs
  • 8 uncommitted, isolated inputs and 4 isolated outputs
  • High speed position latch and output compare
  • 2 uncommitted 12bit 0-5V analog inputs (16bit ±10V inputs on DMC-31xxx) and 1 uncommitted analog output
  • Standard power input is +/-12V and 5V. Controller available with optional DC-DC converter with 9-48VDC single supply input. (Option for 20-80 VDC).

For more information, visit Galil Ethernet/RS232 Single Axis Motion Controller.

About Electromate:

Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

More on Electromate can be found at

Website: http://www.electromate.com

LinkedIn: https://www.linkedin.com/company-beta/209277/

Twitter: https://twitter.com/Electromate

Facebook: https://www.facebook.com/electromateindustrial/

Blog: https://electromate.wordpress.com/

motion control -innovation award

 

 

For more information on the “Innovation and Technology Award”

CLICK HERE!

 

 

motion control - components

 

 

For more information on the “2021 Excellence Award”

CLICK HERE!

 

 

motion control - products

 

 

For more information on the “Best Place to Work” CLICK HERE!

 

 

 

 

For more information on the “AHTD Award” CLICK HERE!

 

 

To view Electromate’s new corporate video CLICK HERE

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com


See this and other Motion Control Components from Electromate featured on:

http://MotionShop.com

http://LinearMotionBlogger.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://MotionControlMarketing.com

http://Gotcha-Stick.com

Motion Control - electromate robotics

Motion Control – Application – Mini Pan/Tilt for HD Cameras

Motion Control – Custom Gearmotors
motion control - pan tilt stage

With digital television fast approaching, camera manufacturers are flooding the market with new, lightweight units, but few companies are providing the professional equipment that goes with the upcoming change.

“We searched across all known small motor manufacturers, but only Maxon Precision Motor was able to provide a motor that met our requirements,”
motion control - maxon

Fall River, MA — Motion Control  Application – Up until 2006, the only broadcast-use professional motorized Pan/Tilts in the market were very heavy. This is because the equipment was built to hold analog video cameras, which could weigh as much as 50 kg and up. With February 2009 approaching, the final day of transition for digital TV, the leading HD camera manufacturers, Sony and Panasonic, have flooded the US market with new lightweight HD digital cameras, such as HDR-FX1 and AGHVX200, respectively. These new, HD cameras weigh less than 4.5 kg, and that weight continues to drop as the use of flash memory storage devices continue to rise.

Motion Control – Linear Focus Actuator from Equipment Solutions features 200 Nanometer position Repeatability!

Motion Control – Linear Focus Actuator features 200 Nanometer repeatability!

motion control - linear focus actuator


motion control - miniature components

 

 

Forestville, CA, – — Motion Control – This Custom LFA-2003 Linear Focus Actuator Features: 20 millimeter clear aperture, 3 millimeters linear motion, 200 nanometer position repeatability, Flexure guidance system, ‘C’ mount lens adapter, integrated coil temperature sensor, direct SCA814 Servo Controlled Amplifier compatibility, 74mm x 61mm, 690 grams.

Motion Control – Maxon Motor Introduces The First Sterilizable Drive System!

Motion Control – Miniature Brushless DC motor, Gearhead, Encoder

motion control - miniature gearmotors

With the ENX EASY, maxon motor’s NEW ENX EASY is a sterilizable encoder for use with maxon’s brushless DC motors. This opens up a range of new possibilities in medical technology.

motion control - maxon

 

Fall River, MA — Motion Control Components – This is the world’s first steam sterilizable encoder ENX EASY. It is available in an incremental (1024 counts) and absolute version (4096 steps), both designed for 1,000 autoclave cycles.

Motion Control – High Performance Parallelogram Voice Coil Positioning Stage From Equipment Solutions Is a Complete Positioning System!

Motion Control – High Performance Parallelogram Voice Coil Positioning Stage

motion control - miniature stage

Forestville, CA – Motion Control – Components – The PVS-5.5 Parallelogram Voice Coil Stage from Equipment Solutions is a complete, compact high performance positioning system. This compact stage (37mm x 31 mm x 32 mm) weighing just 70 grams features a 5 mm clear aperture through the center of the motor and the friction free, flexure linking system.

motion control - equipment solutions

 

 

Non-linearity is <±0.5% throughout the stages 5 mm range of motion. PVS-5.5 Parallelogram Voice Coil Stage is ideal for optical focusing and micropositioning applications such as: Semiconductor, medical, optical testing, scanning microscopy, circuit board assembly, and micro manufacturing.

Motion Control – The world’s lightest electric mountain bike features maxon BIKEDRIVE AIR

Motion Control – Application – Mountain Bike

Motion Control – With the new Lightrider E Ultimate, Swiss bicycle manufacturer Thömus is launching the world’s first full-suspension cross-country electric mountain bike weighing less than 15 kilograms. This record-breaking weight is made possible by the small and efficient maxon BIKEDRIVE AIR drive in the extremely lightweight Thömus ultra-high modulus carbon frame.

motion control - lightest mountain bike

Taunton, MA — Motion Control – The partnership between Thömus and drive specialist maxon that began in the winter of 2021 is delivering results not only in World Cup racing. Behind the scenes, a lot of work has been done on a new, ultra-lightweight electric mountain bike in recent months, which, together with the maxon BIKEDRIVE AIR drive, heralds a new era for electric mountain bikes.

motion control - maxon

Weighing less than 15 kilograms in total and with a slim, rigid frame, the Lightrider E Ultimate is a real racing bike that can be maneuvered easily and agilely over any terrain.

Motion Control – New IDX Compact Servo Motor with Integrated Positioning Controller from Maxon is available from Electromate!

Motion Control – Integrated Servo Motor

This compact brushless EC-i motor combined with an EPOS4 positioning controller delivers a highly dynamic, powerful drive package with field-oriented control (FOC), high efficiency, and maintenance-free components in a high-quality industrial housing.
motion control - electromate robotics
motion control - integrated Servo Motor

 


Vaughan, Ontario, Canada — Motion Control Components — Maxon’s new IDX compact integrated servo gearmotor + drive combines a powerful, brushless EC-i motor and an EPOS4 positioning controller, which can be complemented with a maxon planetary gearhead when required. This integrated motor stands out for its high torque density, high efficiency, maintenance-free components, and a high-quality industrial housing providing IP65 protection.

Motion Control – Miniature Voice Coil Stage has 35 mm Travel and Features 200 Nanometer Position Repeatability!

Motion Control – Miniature Linear Voice Coil Stage

Motion Control – VCS-35 Voice Coil Stage: 35mm of linear motion; Optional clear aperture; Recirculating ball bearing guidance system; 200 nanometer position repeatability; 37 G’s acceleration; Direct SCA814 Servo Controlled Amplifier compatibility; 38 x 41 x 102mm, 320 grams
motion control - miniature stage

Forestville, CA – Motion Control – Products – Equipment Solutions, Inc. (ESI) is a provider of engineering and manufacturing services. ESI specializes in the design and production of automation and instrumentation products including motion control components and sub systems.

motion control - equipment solutions

Motion Control – Linear Focus Actuator from Equipment Solutions!

Motion Control – Linear Focus Actuator

motion control - linear focus actuator

 

Forestville, CA – Motion Control – The LFA-1205 Linear Focus Actuator is a high performance compact positioning system.  It was specifically developed for optical applications requiring both high precision and high-speed positioning over a short to medium stroke.  

motion control - miniature components

The LFA-1205 is well suited for optical focusing and other micropositioning applications such as scanning interferometry, surface structure analysis, disk drive testing, autofocus systems, confocal microscopy, bio-technology, semiconductor test equipment.

Motion Control Application – Robotic Rib Spreading Tool to Help Patients Hurt Less and Heal Faster!

Motion Control – Medical Application

Motion Control – One advanced technology company is taking on the challenge of developing hand-held, robotic surgical instruments to help patients hurt less and heal faster.  High torque maxon motors ensure jerk-free movement of the tool.
motion control - maxon application
Fall River, MA — Motion Control – It may sound unbelievable, but some tools that physicians use to perform invasive surgery were originally developed in the 1930s and have gone through minimal updating since.

motion control - maxon

 

Most often, these tools have been efficient enough to do the job, even if patients took a long time to heal.

Motion Control – Linear Servo Controller for Non-Commutated Motor from Equipment Solutions!

Motion Control – Linear Servo Controller

motion control - miniature controller

 

Forestville, CA, – Motion Control – The SCA814 Linear Servo Controller was specifically designed to control single phase, non-comutated devices like voice coil motors. like it’s field proven predecessor the SCA754 is a high performance single axis DC motor controller and amplifier system. It is comprised of a highly integrated single PC board level product with a cohesive interface.

motion control - miniature components

This card provides current amplification and analog servo control interfaces. The single-phase characteristic of the current amplifier makes it particularly well suited for DC motors such as galvanometers and voice coils.

Innovative Motion Control – Mars helicopter receives Collier Trophy

Innovative Motion Control – Mars Helicopter!

Innovative Motion Control – The Mars helicopter team is awarded the Collier Trophy for being the first aircraft to achieve powered, controlled flight on another planet. NASA’s Ingenuity helicopter flies with electric motors from the Swiss company maxon, a provider of precision drives. This prestigious award was presented on June 9th in Washington DC by the National Aeronautic Association (NAA)

innovative motion control - collier award

The Swiss specialist for quality drives maxon is a developer and manufacturer of brushed and brushless DC motors, as well as gearheads, encoders, controllers, and entire mechatronic systems. maxon drives are used wherever the requirements are particularly high: in NASA’s Mars rovers, in surgical power tools, in humanoid robots, and in precision industrial applications, for example. To maintain its leadership in this demanding market, the company invests extensively in research and development. Worldwide, maxon has 3,059 employees at nine production sites and is represented by sales companies in more than 30 countries.


motion control - maxon motors

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Taunton, MA — Innovative Motion Control – Application – Sachseln, Switzerland – NASA’s Mars helicopter is the first controlled aircraft in history to be used on a planet other than Earth, laying the way for future airborne exploratory missions to other planets. The pioneer project has been developed by a team of engineers, including from NASA’s Jet Propulsion Laboratory (JPL), AeroVironment and maxon.

Motion Control – Kollmorgen debuts EKM Series Brushless AC Servo Motors

Motion Control – Brushless AC Servo Motors!motion control - electromate robotics
motion control - ac servo motor

 

                             

 

Motion Control – These enhanced, high-performance motors are MilSpec 810E rated and IP67 sealed. They are supplied standard with a stainless-steel shaft and chemical agent-resistant paint for reliable duty in harsh environmental conditions.

Vaughan, Ontario, Canada — Motion Control – Kollmorgen has recently introduced the new EKM series of Enhanced, High-Performance, Brushless AC Servo Motors. EKM Series Motors are Mil-Spec 810E rated and IP67 sealed for duty in harsh environmental conditions.

Motion Control – Maxon Is Providing Its e-bike Platform and Joining the Thömus Cross-country Team!

Motion Control – Maxon Application!

motion control - maxon application

In 2022, Olympic silver medalist Mathias Flückiger rides for the Thömus-maxon cross-country racing team.


motion control - maxon motor

 

Taunton, MA — Motion Control – Swiss bicycle manufacturer Thömus and drive specialist maxon are entering into a partnership in cross-country cycling. As part of this cooperation, maxon is providing its e-bike platform to Thömus as the basis for an electric mountain bike for World Cup training. They also plan to make this bike available to the retail trade in the future.

Motion Control – Kollmorgen debuts new generation of robot-ready frameless servo motors

Motion Control – Frameless Servos for Robots

motion control- frameless motors for robots


Vaughan, Ontario, Canada — Motion Control – Components — Kollmorgen has introduced the new TBM2G series of frameless servo motors, introducing features that simplify the design of collaborative, surgical, aerospace and defense and other robots while delivering optimal performance in a lighter, more compact package. These new motors will complement Kollmorgen’s existing TBM and KBM series of frameless motors.

motion control - electromate robotics

Resulting from several years of research, testing and customer feedback, the TBM2G series offers high-performance torque in an extremely compact electromagnetics package. These next-generation motors enable robots with lower joint weight, higher load-carrying capacity, improved energy efficiency, lower thermal rise, and faster, smoother movements.

Motion Control – the LFA-3404 Is an Open Aperture Linear Focus Actuator from Equipment Solutions

motion control - linear focus actuator

Motion Control – LFA-3404 Linear Focus Actuator: 34 millimeter clear aperture, 4 millimeter range of motion, <50 nanometer positioning resolution, 90 grams moving mass, 89 x 57mm, 1kg


motion control - Miniature actuatorsForestville, CA, – Motion Control –
LFA-3404 Linear Focus Actuator: is a high performance compact positioning actuator. It was specifically developed for applications requiring both high precision and high-speed positioning over a short to medium stroke. This product mates the voice coil motor to a perfectly smooth flexure guidance system and a very high resolution position feedback encoder.

Motion Control Innovation – Maxon Flat Motors used in Solar Powered Drone

Motion Control Innovation – Solar Powered Drone

Motion Control Innovation – XSun designs and manufactures a drone that is both energy-independent and can make its own decisions, for fully-automated missions. The company needed reliable, high-performance sub-assemblies to design it’s SolarXOne. This is why the start-up approached maxon for the propulsion system.
motion control innovation - solar power ed drone

motion control - maxon

 

Fall River, MA — Motion Control Innovation -Benjamin David, benefiting from a decade of experience at Airbus Defense & Space, created the company XSun based on a rather simple idea: Adapting space technologies for use at lower altitude. This approach produced SolarXOne: A solar-powered, electrical, self-contained drone with a tandem wing design. SolarXOne, with its dragonfly-like design, has excellent aerodynamic performance and a large surface area of solar panels, to collect as much solar energy as possible. This is all within a very high-performance, fully-electric environment.

To see YouTube video click HERE

Motion Control- Application – Underwater inspection on twelve wheels.

Motion Control – Application – Underwater Inspection

Motion Control – Application – Inspecting flooded pipes of power plants requires skilled, high-precision handling. And the robotic vehicles have to be optimized accordingly, for example to dive 20 m deep. The new seawater manipulator is capable of maneuvering underwater in pipes, where it can be used to perform inspections. RE motors by maxon are responsible for the dynamic drive of the robot.

motion control - application

motion control - maxon motor

 

 

Taunton, MA — Motion Control Application – In robotics, manipulators are those devices that enable physical interaction with their surroundings. For this interaction, the robotic vehicles are equipped with appropriate tools, gripper systems or measuring devices. In the case of the seawater manipulator, this equipment largely consists of high-performance cameras used for pipe inspection. Ibass, from Augsburg in Germany, develops, manufactures and distributes manipulators for various in-pipe applications: inspection, grinding, welding, retrieval or suction.

Motion Control – SPS15 Power Supply from Equipment Solutions for Voice Coil Actuators!

Motion Control – Voice Coil Motor Power Supply!

motion control - voice coil motor power supply


Forestville, CA, – — The motion control SPS15 power supply will power any Equipment Solutions Linear Focus Actuator. With its universal instrumentation cord power entry module you will be able to run power from literally anywhere in the world anywhere.

motion control - miniature components

Motion Control – New LDL Programmable Linear Actuator from SMAC

Motion Control – A Great Place to Work!

motion control - smac linear actuatorsCost-competitive Alternative to Pneumatics, Starting at $300 US/ea

Motion Control – Vaughan, Ontario, Canada – The New LDL Programmable Electric Linear Actuator from SMAC has been designed as a cost-competitive alternative to pneumatics.  A common trend in industrial automation is that users are looking for electric alternatives to their pneumatic components for a number of reasons: increased control, improved cycle life, and reduced operating cost.

The LDL series actuator features several innovative cost reduction elements that result in a list price starting at $300 US/ea. 

Powered by WordPress and ThemeMag