Category Archives: Controller – Brushed Mtrs

Motion Control – Latest Generation Single Axis Motion Controller from Galil

Motion Control – New Single Axis Motion Controller!

 This 1-axis motion controller features Ethernet/RS232 communication and an optional 800W Servo Drive

motion control - advanced single axis controller


motion control - electromate robotics

 

 

Vaughan, Ontario, Canada — Motion Control -The DMC-3x01x Motion Controller Series is Galil’s latest generation single-axis motion controller. It uses a 32-bit RISC processor to provide higher speed than older models.  Like all Galil controllers, programming the DMC-3x01x is simplified with two-letter, intuitive commands and a full set of software tools for servo tuning and analysis. The DMC-3x01x Motion Controller Series feature:

  • Available as a compact card-level or box-level unit
  • Connects to a stepper or servo motor amplifier of any power range
  • Can be purchased with an internal 800-Watt brushless sine drive   or microstepping drive which minimizes space, cost, and wiring
  • Operates stand-alone or can be networked to a PC via Ethernet
  • Modes of motion include point-to-point positioning, position tracking, jogging, contouring, electronic gearing and ecam.

Features include:

  • Two daisy-chainable Ethernet 100 Base-T ports. One 115kbaud RS232 port
  • Ethernet supports multiple masters and slaves. TCP/IP, UDP and Modbus TCP master protocol for communication with I/O devices
  • Encoder feedback up to 15 MHz. Quadrature standard. SSI and BiSS encoder option(SER). Sinusoidal Encoder option (DMC-31xxx). Main and auxiliary encoder inputs
  • Non-volatile memory for programs, variables, and arrays.
  • Concurrent execution of four programs.
  • Optically isolated forward and reverse limit inputs and homing inputs
  • 8 uncommitted, isolated inputs and 4 isolated outputs
  • High speed position latch and output compare
  • 2 uncommitted 12bit 0-5V analog inputs (16bit ±10V inputs on DMC-31xxx) and 1 uncommitted analog output
  • Standard power input is +/-12V and 5V. Controller available with optional DC-DC converter with 9-48VDC single supply input. (Option for 20-80 VDC).

For more information, visit Galil Ethernet/RS232 Single Axis Motion Controller.

About Electromate:

Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

More on Electromate can be found at

Website: http://www.electromate.com

LinkedIn: https://www.linkedin.com/company-beta/209277/

Twitter: https://twitter.com/Electromate

Facebook: https://www.facebook.com/electromateindustrial/

Blog: https://electromate.wordpress.com/

motion control -innovation award

 

 

For more information on the “Innovation and Technology Award”

CLICK HERE!

 

 

motion control - components

 

 

For more information on the “2021 Excellence Award”

CLICK HERE!

 

 

motion control - products

 

 

For more information on the “Best Place to Work” CLICK HERE!

 

 

 

 

For more information on the “AHTD Award” CLICK HERE!

 

 

To view Electromate’s new corporate video CLICK HERE

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com


See this and other Motion Control Components from Electromate featured on:

http://MotionShop.com

http://LinearMotionBlogger.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

http://MotionControlMarketing.com

http://Gotcha-Stick.com

Motion Control - electromate robotics

Motion Control – Dual Axis Yaw-and-Pitch Stages Feature Full Range of Motion of Each Axis Under a Single Fixed Point in Space!

Motion Control – Yaw Pitch Stages

motion control - yaw pitch stages

motion control - OES Components

 

 

 

Van Nuys, CA – — Motion Control – A new, series of Dual-axis Yaw-and-Pitch Stages have been introduced by OES (Optimal Engineering Systems, Inc.). This new series of high precision Yaw-and-Pitch stages are ideal for precise measurements of compound curves and angles of an object during inspection or reverse engineering, laser machining and drilling, scanning, tracking, mirror positioning, and for use with coordinate measuring machines and autocollimators.

Motion Control – Maxon’s Driven Magazine – See the article “Speed or Torque – or Both?”

Motion Control – Maxon’s Driven Magazine

motion control driven magazine

 

Motion Control article “Speed or Torque – or Both” in Maxon’s Driven magazine helps in selecting the right motor for an application.  An application that could be on Mars, under water, or even implanted in the human body!

motion control - maxon

 

 

Fall River, MA — Motion Control – The Maxon catalog contains a large number of brushless motor types that are called EC Motors. The artice in this issue of DRIVEN briefly describes their properties and possible areas of application.   

Motion Control – The world’s lightest electric mountain bike features maxon BIKEDRIVE AIR

Motion Control – Application – Mountain Bike

Motion Control – With the new Lightrider E Ultimate, Swiss bicycle manufacturer Thömus is launching the world’s first full-suspension cross-country electric mountain bike weighing less than 15 kilograms. This record-breaking weight is made possible by the small and efficient maxon BIKEDRIVE AIR drive in the extremely lightweight Thömus ultra-high modulus carbon frame.

motion control - lightest mountain bike

Taunton, MA — Motion Control – The partnership between Thömus and drive specialist maxon that began in the winter of 2021 is delivering results not only in World Cup racing. Behind the scenes, a lot of work has been done on a new, ultra-lightweight electric mountain bike in recent months, which, together with the maxon BIKEDRIVE AIR drive, heralds a new era for electric mountain bikes.

motion control - maxon

Weighing less than 15 kilograms in total and with a slim, rigid frame, the Lightrider E Ultimate is a real racing bike that can be maneuvered easily and agilely over any terrain.

Motion Control – NEW! Elevator Stages from OES Feature 0.03 micron Resolution!

Motion Control – 0.03 micron Resolution Elevator Stage!

motion control - elevator stage


motion control - OES

 

 

 

Van Nuys, CA – — Motion Control – Two new motorized elevator stages, the DAG20-120-01 and the DAG20-120-04 have been released by Optimal Engineering Systems, Inc. (OES).  These high resolution, compact, low profile elevator stages feature high stability 120 mm x 120 mm tables and 20 mm of vertical travel.  High precision ball bearing profile rails assure very high parallelism and smooth motion throughout the raising and lowering of the table.  These Z-Axis Stages are ideal for: Microscopy, inspection, metrology, positioning, photonics, sampling, and laser drilling and machining.

Motion Control – High Precision XYR Alignment Stage Has Better Than +/- 3 Micron Accuracy!

Motion Control – Alignment Stage!

motion control - alignment stage
Van Nuys, CA – — Motion Control -Optimal Engineering Systems, Inc. (OES) has introduced the XYR-300-400 Alignment Stage offering +/- 3 micron accuracy for industrial, medical, semiconductor, production, research, and laboratory applications.  The XYR-300-400 Alignment Stage features +/- 15 mm of travel in the X and Y axes and +/- 5 degrees of rotation (theta). It moves in XY-plane and rotates around the center of the XY-plane.

motion control - stages - custom

The XYR-300-400 Alignment Stage feature linear resolutions of the X and Y axis of 1 micron resolution with a 10 micro-steps per step motor driver and static parallelism of less than 0.05 mm.

Motion Control Application – Robotic Rib Spreading Tool to Help Patients Hurt Less and Heal Faster!

Motion Control – Medical Application

Motion Control – One advanced technology company is taking on the challenge of developing hand-held, robotic surgical instruments to help patients hurt less and heal faster.  High torque maxon motors ensure jerk-free movement of the tool.
motion control - maxon application
Fall River, MA — Motion Control – It may sound unbelievable, but some tools that physicians use to perform invasive surgery were originally developed in the 1930s and have gone through minimal updating since.

motion control - maxon

 

Most often, these tools have been efficient enough to do the job, even if patients took a long time to heal.

Motion Control – Kollmorgen debuts EKM Series Brushless AC Servo Motors

Motion Control – Brushless AC Servo Motors!motion control - electromate robotics
motion control - ac servo motor

 

                             

 

Motion Control – These enhanced, high-performance motors are MilSpec 810E rated and IP67 sealed. They are supplied standard with a stainless-steel shaft and chemical agent-resistant paint for reliable duty in harsh environmental conditions.

Vaughan, Ontario, Canada — Motion Control – Kollmorgen has recently introduced the new EKM series of Enhanced, High-Performance, Brushless AC Servo Motors. EKM Series Motors are Mil-Spec 810E rated and IP67 sealed for duty in harsh environmental conditions.

Motion Control – Low Cost 1, 2, 3, and 4 ADAGIO Axis Stepper Motor Motion Control Systems Available from Optimal Engineering Systems, Inc. (OES)!

Motion Control – Stepper Motor Motion Control Systems

motion control - stepper motor controller


motion control - stages - customVan Nuys, CA – — Motion Control – To complement the Optimal Engineering Systems’ (OES) expanding line of single and multi-axis motion control stages, OES has added the ADAGIO-X-STPR Series of Motion Control Systems.

The ADAGIO-STPR Series of rack mounted Stand-alone Stepper Motor Controllers are cost effective solutions for controlling and driving single and multi-axis stepper motor stages such as: AQ single and dual axes X and XY series stages Low Cost X and XY Stages, the YPR Series of Three-axes Yaw, Pitch, and Roll Stages Yaw, Pitch, and Roll Stages, the Four axes XYZR is a three XYZ Linear Axes Plus a Vertical Rotary Stage XYZ plus Rotary Stage.

Motion Control – Maxon Is Providing Its e-bike Platform and Joining the Thömus Cross-country Team!

Motion Control – Maxon Application!

motion control - maxon application

In 2022, Olympic silver medalist Mathias Flückiger rides for the Thömus-maxon cross-country racing team.


motion control - maxon motor

 

Taunton, MA — Motion Control – Swiss bicycle manufacturer Thömus and drive specialist maxon are entering into a partnership in cross-country cycling. As part of this cooperation, maxon is providing its e-bike platform to Thömus as the basis for an electric mountain bike for World Cup training. They also plan to make this bike available to the retail trade in the future.

Motion Control – Kollmorgen debuts new generation of robot-ready frameless servo motors

Motion Control – Frameless Servos for Robots

motion control- frameless motors for robots


Vaughan, Ontario, Canada — Motion Control – Components — Kollmorgen has introduced the new TBM2G series of frameless servo motors, introducing features that simplify the design of collaborative, surgical, aerospace and defense and other robots while delivering optimal performance in a lighter, more compact package. These new motors will complement Kollmorgen’s existing TBM and KBM series of frameless motors.

motion control - electromate robotics

Resulting from several years of research, testing and customer feedback, the TBM2G series offers high-performance torque in an extremely compact electromagnetics package. These next-generation motors enable robots with lower joint weight, higher load-carrying capacity, improved energy efficiency, lower thermal rise, and faster, smoother movements.

Motion Control Innovation – Maxon Flat Motors used in Solar Powered Drone

Motion Control Innovation – Solar Powered Drone

Motion Control Innovation – XSun designs and manufactures a drone that is both energy-independent and can make its own decisions, for fully-automated missions. The company needed reliable, high-performance sub-assemblies to design it’s SolarXOne. This is why the start-up approached maxon for the propulsion system.
motion control innovation - solar power ed drone

motion control - maxon

 

Fall River, MA — Motion Control Innovation -Benjamin David, benefiting from a decade of experience at Airbus Defense & Space, created the company XSun based on a rather simple idea: Adapting space technologies for use at lower altitude. This approach produced SolarXOne: A solar-powered, electrical, self-contained drone with a tandem wing design. SolarXOne, with its dragonfly-like design, has excellent aerodynamic performance and a large surface area of solar panels, to collect as much solar energy as possible. This is all within a very high-performance, fully-electric environment.

To see YouTube video click HERE

Motion Control – New LDL Programmable Linear Actuator from SMAC

Motion Control – A Great Place to Work!

motion control - smac linear actuatorsCost-competitive Alternative to Pneumatics, Starting at $300 US/ea

Motion Control – Vaughan, Ontario, Canada – The New LDL Programmable Electric Linear Actuator from SMAC has been designed as a cost-competitive alternative to pneumatics.  A common trend in industrial automation is that users are looking for electric alternatives to their pneumatic components for a number of reasons: increased control, improved cycle life, and reduced operating cost.

The LDL series actuator features several innovative cost reduction elements that result in a list price starting at $300 US/ea. 

Motion Control Application – Monitoring Over 6,000 Miles with the Galil DMC-4020 Motion Controller

Motion Control Application – Motion Controllersmotion control - controller Application
motion control - electromate- robotics

 

 

 

Vaughan, Ontario, Canada – Motion Control Application – It’s estimated over 850,000 have entered the United States unlawfully since 2002. The try and prevent this, U.S. Border Patrol agents have the arduous task of monitoring over 6,000 miles of land along the southern US-Mexican and northern US-Canadian borders. To assist in this demanding task, a number of solutions are employed. This includes rangers, canine units, helicopters, drones, ATV’s, watchtowers, and 20-foot tall walls. Even with all these efforts, it’s not enough to cover all those miles.

Motion Control – Electromate extends its product portfolio to include Robots from Mecademic!

Motion Control – Electromate adds Robots from Mecademic!

motion control - electromate robotics

Electromate’s new partnership with Mecademic will expand its reach to end users and manufacturers needing ultra compact and precise industrial robots across Canada.

 

 

 

TORONTO, Ontario — Electromate Inc., a leading Canadian Distributor of Precision Robotic & Mechatronic Solutions, today announced a partnership with Mecademic, a Montreal based premier manufacturer of the world’s smallest, most compact, and precise industrial robots.

Motion Control – Maxon is expanding their positioning controllers in the micro segment!

Motion Control –  Micro Positioning Controllers!

Motion Control – Maxon has introduced the EPOS4 Compact 24/5 EtherCAT 3-axes Controller as they continue expanding teir range of miniature controllers.

motion control - miniature controller


motion control - maxon

 

Taunton, MA — Motion Control – The EtherCAT version of the EPOS 4 Micro 24/5 positioning controller is another brand-new product. The controller’s functionality, operation, software, and accessories are derived almost directly from the existing products in the EPOS4 range. It is suitable for use with both brushed DC and brushless EC motors with a continuous power of up to 120 W and has comprehensive feedback options such as Hall sensors, as well as digital incremental and SSI absolute encoders.

Motion Control – Introducing the World’s Smallest Multi-Turn Absolute Kit Encoders!

Motion Control – Miniature Encoders

Miniaturized device features accuracy, robustness and a zero-maintenance rotation counter – all in a 22 mm diameter package

motion control miniature encoder

 

motion control - electromate robotics


Vaughan, Ontario, Canada — Motion Control Components — Size matters, and in the world of industrial automation, providing exceptional performance in a highly compact package can be an enormous advantage. With this in mind, encoder manufacturer POSITAL has unveiled a fully functional prototype of their new miniature multi-turn kit encoder for integrated motor feedback. With a diameter of only 22 mm and a height of 23 mm (0.87”/0.9”), the new device is the world’s smallest multi-turn kit.

Motion Control – From soaring heights: Camera stabilization with maxon drives!

Motion Control – Camera stabilization System!

Aerial images can be beneficial for many businesses and industries. Often things are revealed from above that are hidden to the observer on the ground. Drives from maxon are used in camera stabilizer systems.

motion control - Application


motion control - maxon motors

 

Taunton, MA — Motion Control Application – Mining companies, for example, survey mines from the air, oil and gas suppliers monitor their drilling rigs, and energy utilities monitor their overland lines. All these applications have one big challenge in common: In these often rough operating environments, the camera needs to be protected against wind, turbulence and the vibration of the carrier aircraft while being kept in a stable position. This is the job of a high-precision stabilization camera gimbal. These gimbals provide users with a stable and level platform that allows them to capture high-quality aerial images.

Motion Control – Open Aperture XY Stages from OES Feature: High Resolution and High Repeatability!

Motion Control – Open Aperture XY Stages!

motion control- xy stages

Van Nuys, CA – — Motion Control – Two new high resolution, high repeatability XY stages have been released by Optimal Engineering Systems, Inc. (OES). The AU200-15×15-01 Motorized Stage (pictured) and the AU200-15×15-04 Motorized Stage are powered by Two-Phase Stepper Motors and have high 0.25 micron resolution and high 1.5 micron repeatability.

motion control - OES

The AU200-15×15-04 stage includes Quadrature encoders for position verification. Both stages have a large 3.54 in. x 3.54 in. (90 mm x 90 mm) platform with large open aperture and feature standard 1 mm-per-turn ground lead screws, and precision V-grove and Cross Roller guides.

Motion Control – The World’s Most Precise Six-axis Robot by Mecademic!

Motion Control –  Six-axis Robot!

motion control - robot


motion control - electromate- robotics

 

 

 

Vaughan, Ontario, Canada — Motion Control Components — Mecademic is a Canadian robotics manufacturer that builds the world’s smallest, most precise, and easy-to-use industrial robotic arm, the Meca500. The Meca500 robot excels in the precise and repetitive manipulation of small parts and tools in a variety of industries.

The six-axis robot can handle payloads up to 500 g with an unmatched accuracy of 0.005 mm (5 µm).

Powered by WordPress and ThemeMag