Archive for the ‘Gantry Robot’ Category

Motion Control – Checkout the BEMA Series of Large Open Frame XYZ Gantry Systems from Intellidrives!

  Philadelphia, PA, — Motion Control Components and Systems – XYZ Gantry Systems – IntelLIDrives new Syncronized XYZ Gantries BEMA Series are offered in travel length from 300 x 300 mm to 3,000 x 3,0000 mm. With speed up to 2 m/sec, BEMA Gantry Series is perfect for applications in high speed positioning for light-to-medium […]

Motion Control – New 300 mm x 300 mm Open Aperture XY Gantry Robot from Intellidrives!

Intellidrives’ Precision BEMA45 Open Aperture Gantry Robot features 50 micron repeatability!   Philadelphia, PA, — Motion Control Components and Systems – The new 300 mm x 300 mm (11.811 in. x 11.811in.) open aperture BEMA45 gantry robot from Intellidrives supports tooling, testing, scanning, and vision systems up to 15kg (33.07 lbs). The 75 mm/rev (2.953 […]

Motion Control – Single Rail Positioning Stage H Gantry from H2W Technologies.

Santa Clarita, CA —– H2W Technologies’ latest single rail positioning stage H-gantry design is an open frame XY positioning system. It has two bottom parallel axes with one cross axis connecting the two (H-gantry). Each linear axis uses H2W’s brushless linear motors (BLDM-B04), and each has a total stroke length of 25.67 in [652 mm]; […]

Motion Control – Large Area Travel XYZ Gantry Systems from Intellidrives!

  Philadelphia, PA, — Motion Control Components – IntelLIDrives new Syncronized XY and XYZ BEMA Series Gantries are offered in travel length from 300 x 300 mm to 3,000 x 3,0000 mm. Constructed using a rigid, light weight frame, and linear guides, the precision, low cost BEMA Series features: Repeatability of ± 50µ, and accuracies […]

XY Gantry Robot with Theta-Control from Intellidrives!

Philadelphia, PA, — Motion Control Components and Systems – Repeatability and accuracy are essential characteristics of any motion control system, and the objective of the design is to assure the desired trajectories can accurately follow through the working range of the system. In traditional XY gantry designs upper gantry member (Y axis) is carried by […]

Motion Control – Linear Positioning Stages With an Integrated Closed Loop Servo Theta Stage!

Santa Clarita, CA — Motion Control- H2W introduces an integrated SR series linear positioning stage with an integrated closed loop servo theta stage for two axis linear / rotary motion control applications. The Z axis linear motion is achieved by using a brushless linear motor positioning stage (P/N SRT-024-04-360-040-01) operating under closed loop position control. […]

Powered by WordPress | Designed by: WordPress Themes | Thanks to Top WordPress Themes, Premium WordPress Themes and
wordpress visitor counter