Motion Control – IP69K Food Grade HMI Solution from Exor Available from Electromate!

motion control HMI Display

 

Motion Control - Electromate-Logo

 

eTOP507MFB – Designed for Food and Beverage industry with Stainless steel bezel

 

Vaughan, Ontario, Canada —

  • NO MORE! Covering the HMI for Cleaning!
  • NO MORE! Secondary Cleaning Procedures
  • LESS CHANCE for Food & Beverage Product Contamination due to Manual Cleaning!
  • 316 Stainless Steel Bezel
  • IP69K
  • Harsh Chemical Resistant
  • PCAP “Glove Compatible” Touchscreen
  • Food Compatible gasket and sealing compliant with FDA 21 CFR 177.2006

The eTOP4FOOD has been designed and proven to solve the industry wide problem of HMI failures and less effective alternative HMI cleaning procedures. With the eTOP4FOOD no longer is the HMI required to be shielded from high temperature, high pressure cleaning. The IP69K PCAP Touch “Glove Compatible” HMI has a 316 SS bezel and Polyester front foil resistant to the high pressure, high temperature, harsh chemical wash-down and is designed to thrive! No more covering the HMI panel during equipment cleaning! No more manual, less effective secondary cleaning procedures! And most certainly, no more HMI failures! Reduced labor, and more importantly reduced risk of product contamination from manual, secondary cleaning procedures because the HMI just isn’t tough enough! eTOP4FOOD solves real problems!

Features include:

  • Stainless steel bezel 316/1.440l
  • IP69K
  • Food-compatible gasket
  • Food standard sealing compliant with FDA 21 CFR 177.2006
  • PCAP touchscreen, can be operated with gloves for food areas
  • TFT display 800×480 64K colors
  • High-performance 1 GHz ARM CPU with 256 MB Flash
  • Designed according to DIN EN1672-2
  • Designed according to the EHEDG Guideline
  • Extended temperature range (-20°C +60°C)
  • 2 Host interface v.2.0, SD Card Slot, 2 Ethernet port with integrated Switch
  • Serial port RS-232, RS-485, RS-422, MPI Software configurable
  • Ready for integrated CODESYS PLC and I/O

Click on the link below to view the specification on Exor’s IP69K Food Grade HMI-
http://www.electromate.com/assets/catalog-library/pdfs/exor-electronics/Exor_eTOP507MFB_Specsheet.pdf

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 FREE (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

 

Motion Control - Electromate-Logo
Visit our Website
Motion Control - Electromate Twitter Link
Motion Control - Electromate Facebook Link
Responses are currently closed, but you can trackback from your own site.

Comments are closed.

Powered by WordPress | Designed by: WordPress Themes | Thanks to Top WordPress Themes, Premium WordPress Themes and
wordpress visitor counter